Service manual
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-6
✽
For more details, see the “Operator’s Manual” shipped with the copier.
2-3. 23 cpm Copier
1. 10-Keys
•
Numeric keypad used for setting the num-
ber of copies to be made, zoom ratio, and
Tech. Rep. mode settings.
2. Clear Key
•
Clear the number-of-copies setting, zoom
ratio, choice modes setting.
3. Energy Saver Key
•
Sets the copier into the Energy Saver
mode.
4. Interrupt Key
•
Sets the copier into, or lets it leave, the
Interrupt mode.
5. Panel Reset Key
•
Resets the copier to the initial mode.
6. Stop Key
•
Stops a multi-copy cycle or a test (F
✽
)
operation.
7. Start Key
•
Starts a multi-copy cycle or a test (F
✽
)
operation.
8. Paper Select Key
•
Selects the paper source.
9. Zoom Ratio Select Key
•
Selects a fixed zoom ratio.
10. Zoom Up/Down Keys
•
Changes the zoom ratio manually.
11. Auto Exposure Mode Key
•
Selects either the Auto or Manual
Exposure, or Photo mode.
12. Exposure Control Keys
•
Selects the exposure level.
13. Mixed Original Detection Key
•
Selects the Mixed Original mode.
14. Orig. Copy Key
•
Selects the original-and-copy type.
15. Manual Staple Key
•
Effects manual stapling of copies.
16. Finishing Key
•
Selects the finishing type.
17. Auto Size Key
•
Selects the Auto Size mode.
18. File Margin Key
•
Selects the Margin mode.
19. Cover Key
•
Selects the Cover mode.
20. Job Memory Select Key
•
Calls up a job program previously stored
in memory.
•
Stores a job program when used in com-
bination with the Input key.
21. Job Memory Input Key
•
Stores a job program in, or erases it from,
memory.
22. Drum Dehumidify Key
•
Runs a Drum Dehumidify cycle.
23. Auxiliary Toner Replenishing Key
•
Starts an auxiliary toner replenishing
sequence.
24. Meter Count Key
•
Gives a display of each of the current
counts of different electronic counters of
the copier.