Instruction manual

Manual Film Speed Setting

If you are using a non-DX-coded film or if you wish to override the

automatic setting, you must manually set the film speed. The camera will

initially set non-DX-coded film to the ISO of the previous roll; initially this

value is set to 100.

1. Load the film and close the back cover.

2. Open the card door and press the ISO button.

-NEXT PAGE-

If you use DX-coded film between ISO 25 and

5000, the camera will automatically set the

correct film speed. The film speed setting will be

displayed in the body data panel for 4 sec. after

you load the film.

Automatic Film Speed Setting