User manual

Flash picture is too

dark.

Subject is beyond

flash range.

Make sure the

subject is within the

flash range.

When using the

built-in flash, the

bottom of the

picture is dark.

Lens hood was

attached or subject

distance was less

than 1m (3.3ft).

Remove the lens

hood. To prevent

lens shadowing, the

subject must be at

least 1m (3.3ft.)

from the camera.

Err appears on the

data panel.

Remove the batteries. Reinsert them after

turning the camera off and on. If normal

camera operation does not resume or the

camera malfunctions repeatedly, contact an

authorized Konica Minolta service facility.

CAUTION: if the film was not rewound, opening the back cover with

this method will fog the film; use a film changing bag, completely

dark room, or place the camera under a thick blanket.

To remove the film from the camera in case of a malfunction, use

the following procedure:

1. Turn the camera off.

2. Turn the function dial to the ISO position.

3. While pressing the function button and AEL button, turn the

camera on. The film transport motor will activate for a second to

release the film-chamber lock. The back cover can be opened.

When the camera is open, gently pull the film off the take-up

spool and rewind it back into the cartridge.

Contact an authorized Konica Minolta service facility.