Operation Manual

3938
SELF-TIMER CONTINUOUS-ADVANCE MODE
1. Place the camera on a tripod,
then press the self-timer
button until appears in
the data panel.
2. Center your subject in the
focus frame and focus
subject.
• Attach the eyepiece cap if there is a
bright light source behind the camera.
The eyepiece cap prevents light from
entering through the viewfinder and
affecting the metered exposure.
3. Press the shutter-release
button all the way down to
start the timer.
• The self-timer indicator on the front of
the camera will blink, then glow just
before the shutter releases.
• Do not press the shutter-release button
while standing in front of the camera.
• Self-timer mode is cancelled after the
shutter is released.
The self-timer delays the release of the shutter for approximately 10
seconds after the shutter-release button is pressed.
Press the self-timer button or slide the main switch to
lock to cancel the self-timer before the shutter releases.
1. Press the drive-mode button
until appears in the data
panel.
2. Press the shutter-release button down and hold.
• When taking flash pictures, the shutter will release after the flash is
charged.
• When the subject is moving, the shutter will release after the camera
focuses on the subject.
• To return to single frame mode, press the drive mode button until
appears in the data panel.
In this mode, the camera continues to release the shutter and
advance the film as long as the shutter-release button is held down.
• AF Zoom xi and Power zoom lenses cannot be zoomed when
continuous-advance mode is selected.