ANZANI 50" Ceiling fan
Minka Minka Minka Minka Minka Minka 84011,84012,84013
MORE NOT LESS DC8 RC120-HL
1. Fan body 2. 20W LED light kit 3. Fan blade(3 pcs) 4. canopy 5. light kit plate 6. light shade 7. downrod assembly 8. hanger bracket 9. coupling cover 10. canopy cover 11. Hand Held Remote+holder+2 Mounting Screws+ 1.5v *2 Battery 12. receiver(8 pcs wire nuts) A. Blade attachment hardware 1/4x13mm+S screws(10pcs) B. Mounting hardware #8-32*38mm screw(2pcs) #10x38mm wood screw(2 pcs) Φ5*14*1mm flat washer(2 pcs) 5/32(Φ4.4*9.4*0.5-1.0mm-10) star washer(2pcs) 3/16(Φ5.2*8.4*1.0mm) spring washer(2pcs) C.
35 Minka Minka
Minka Minka Step 2: Remove the hitch pin and lock pin from downrod assembly. (Fig.6) (Fig.7&Fig.8&Fig.
WHITE WHITE RED BLUE BLACK GREEN GREY PURPLE
RECEIVER CANOPY HANGER BRACKET SCREW CANOPY COVER
motor BLADE SCREW INSTALLING THE LIGHT KIT PLATE light kit light kit MOUNTING RING MOUNTING RING SCREW LIGHT KIT PLATE LIGHT KIT PLATE
light kit (Fig.15) (Fig.16) Blue to Blue Step3.Screw back the 3 previously removed screws and tighten the light kit. (Fig.17) LIGHT KIT PLATE SCREW LIGHT KIT PLATE LED LIGHT KIT FIG.16 FIG.
light light kit 18 LIGHT SHADE FIG.
when ON/OFF Dimming There is a "Universal Mode" and "Learning Mode" with the remote control. When selecting "Universal Mode", simply place dip (code) switch to the UP Position (COMMON CODE). There will be no need to pair your fan and remote control. Please Note: Under the universal mode setting, your fan can be controlled by other transmitters also using the “Universal Mode” with no need to pair them. To prevent any possible Interference with other fans in your home.
when 5. The controller is capable to recording 2 frequency setting, to avoid any frequency issues please ensure both frequencies have been set.
19 20 FIG.19 FIG.
There is a "Universal Mode" and "Learning Mode" with the remote control. When selecting "Universal Mode", simply place dip (code) switch to the UP Position (COMMON CODE). There will be no need to pair your fan and remote control. Please Note: Under the universal mode setting, your fan can be controlled by other transmitters also using the “Universal Mode” with no need to pair them. To prevent any possible Interference with other fans in your home.
50 0.09 1.62 33 359 0.47 30.32 182 3390 5.2 1,970 6 100 20 Minka 18 7.0 2.
MKA19102501