Dyno-XL BY
F1001
ELECTRICAL CONNECTIONS FINISHING THE INSTALLATION INSTALLING THE 24W LED ASSEMBLY INSTALLING THE UP HOUSING BLADE INSTALLATION INSTALLING THE FLYWHEEL HANGING THE FAN OPERATING THE REMOTE CONTROL/WALL CONTROL ENJOY YOUR SMART CEILING FAN CARE OF YOUR FAN TROUBLESHOOTING SPECIFICATIONS 14 15
DL-4510 DL-1170FCS-13-WIFI
. Top housing 9. Fan motor assembly 10. 11. 24 12. 13. 14.
3
INSTALLING THE TOP HOUSING Screw Step 1. Remove one of the screws from the fan motor mounting plate , but do not remove, the other two screws. (Fig.5) Step 2. Place the key holes from top housing over the two screws previously loosened from the fan motor mounting plate. Turn the top housing until it locks at the narrow section of the key holes. Secure by tightening the two screws previously loosened and the one screw previously removed. (Fig.
5 6 7 6 7
INSTALLING THE FLYWHEEL Step 1. Align the five holes in the flywheel and the fan motor assembly. Secure them with the five screws provided.. Ensure all the screws are tightened. (Fig.
7 12 13 9 10 14 11
9 10 11 14 12 13
8 15 15 16 16
17 17 17 17
9 18 18 18
10 24 24 19 19 24 19 24
11
22 21 22
12 23 Note: Before moving on to learning about your new smart ceiling fan, please be sure to test all your fans functionalities using your remote control first. To enjoy all the potential of your new ceiling fan. You’ll need to download the BOND HOME app. Available on the Google and Apple Play Store. You can use the QR code shown in (Fig. 23) to download the app, or you can download the app by visiting http:// bondhome_io / app and follow the prompts.
13
14
SYMPTOM Frequency Interference SOLUTION 1.Turn the power off to your ceiling fan. 2.Please use a small size tool to change the frequency settings on the control system. 3.Retrun power to the unit. Note: After the AC power is on, do not press any other button on the transmitter before pressing the “Stop” button, doing so will cause the procedure to fail. 4.Within 60 seconds of turning the fan’s AC power ON. Press the transmitter’s “Stop” button and hold the “Stop” button for 10 seconds. 5.
15 60 120 0.07 3.16 49 120 0.54 34.12 155 7.35 8.8 1.
6 4,028 183 22 1807 3.16 571 5987 34.