Service Parts List S/N K85A

21
24
21
23
23
NOTE:
Wires of the electronics assembly (32) are
routed in traps and cavities in the right handle
halve (23).
To replace the Electronics Assembly (32):
Remove four T-10 handle screws (22) from right
handle halve (23) and two T-10 handle/gear
case screws (21) from right handle halve.
Gently turn tool over and remove two T-10
handle/gear case screws (21) from left handle
halve.
Carefully remove the left handle halve to expose
the electronics assembly.
Use a hex key to remove the three socket head
screws (19) and slide stator/rotor/motor mount
plate out of yoke housing assembly (31).
Rotor assembly (33) must be removed from the
stator by securing the rotor fan and unscrewing
the hex nut (20) outside of motor plate (18).
SEE NEXT PAGE FOR SERVICE INSTRUCTIONS
TO AID WITH THE REMOVAL AND INSTALLATION
OF ELECTRONICS ASSEMBLY (32).
22
Ground wire terminal
LED assembly
Stator
Motor plate (18)
Hex nut (20)
Yoke housing
assembly (31)
Socket head
screws (19)
Hex nut
(20)
Motor plate
(18)
PCBA
LED
On-off
switch
Battery terminal
block
Switch lock
out (27)