jen

ManualsBrandsMillwood Pines ManualsChristmasPink Fir 6.5' Artificial Christmas Tree with 600 LED Pink Lights

Hinged Tree Assembly Instructions

HELPFUL HINTS

• Read instructions completely before you assemble your tree. The model number of your tree is

printed on t

he side of the carton. Always use this number to identify your tree if any questi

arises.

• Save

the carton for storing your tree.

• Use miniature tree lights.

• Replacing burned-out bulbs will make the

other bulbs last longer.

• Handling

the wiring and bulbs with care during packing and unpacking will prolong the life of

the

lighting package.

BEFORE ASSEMBLING

1. Choose a clear, level location

near a wall outlet.

2. Op

en the tree stand and tighten the locking screws on the stand.

3. Carefully insert the Bottom Section of the tree into the locked stand. (The bottom section is the on

with the poi

nt.) Make sure all wires stay clear of the stand opening when

joining the sections.

4. Allow branches to fall into pl

ace or gently pull out and down. IMPORTANT: When adju

sting

branches

be sure that all wires are free of branch hinges.

5. Locate the stacked plugs in the tree section. Plug the stack into the extension cord on the tree po

le.

Do Not Separate Any Plug From the Stack.

6. Plug the extension cord plug into your wall outlet. The tree section should now light up. If any

lights do n

ot light, check the plug stack for loose plugs. Also, check for broken or missing bulbs.

you

find broken or missing bulbs, replace with replacement bulbs, as necessary

7. Insert

the Middle Section into the top of the pole of the standing Bottom Section. Repeat Asse

mbly

Steps 4

through 6 for the Middle Section of the tr

ee.

8. Insert

the tree top section into the top of the pole for the middle section. Repeat Assembly St

eps 4

throu

gh 6. Plug the single plug for the top section into the top outlet of the middle section.

SHAPING

1. Shaping: Work from branches closest to pole. Fan out branches on to the left,

one to the right and one at the center of the main stem. Alternate branches so

that they do not line up one behind the other. At the end of the stem, the

center branch tip should extend straight out. Curve each branch slightly

provide a natural look.

2. Shaping at

the top: Pull down branches of lowest layer in an even circul

patt

ern. Repeat for each layer, working towards the top branch. Curve ea

branch strai

ght up into position. Bend the top branch

straight up into

position.

3. Top Section:

Install tree top section by inserting the tree top into

hole

provid

ed at the top of the pole. The tree top should conform to the rest

the tree.

Summary of content (2 pages)

PAGE 1
Hinged Tree Assembly Instructions HELPFUL HINTS • Read instructions completely before you assemble your tree. The model number of your tree is printed on the side of the carton. Always use this number to identify your tree if any question arises. • Save the carton for storing your tree. • Use miniature tree lights. • Replacing burned-out bulbs will make the other bulbs last longer. • Handling the wiring and bulbs with care during packing and unpacking will prolong the life of the lighting package.
PAGE 2
STORAGE TIPS 1. Unplug the power strip from the wall outlet. 2. Unplug each section from the extension cord. Do Not Separate Any Plug From It’s Stack 3. Gently lift off the top and middle sections, and remove the bottom section from the tree stand. 4. Replace the tree in its box, being careful not to damage the wire or break any bulbs. 5. Store the box in a cool, dry place where the temperature does not exceed 104o F (40 o C). USER SERVICING INSTRUCTIONS This product employs a replaceable fuse.