Operating and Installation Instructions Washer To prevent accidents and appliance damage, read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 6 Caring for the environment .............................................................................. 11 Guide to the washer .......................................................................................... 12 Control panel ....................................................................................................... 12 How the control field works.....................................
Contents Extra options...................................................................................................... Lightly soiled ....................................................................................................... Heavy soiled ........................................................................................................ SoftSteam ........................................................................................................... Buzzer..........................
Contents Installation.......................................................................................................... Front view ............................................................................................................ Rear view............................................................................................................. Installation surface ..............................................................................................
Contents Welcome tone............................................................................................... Networking .......................................................................................................... Remote control ............................................................................................. SmartGrid..................................................................................................... RemoteUpdate ............................
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before using the appliance. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
IMPORTANT SAFETY INSTRUCTIONS Before connecting the machine, ensure that the connection data on the data plate (fusing, voltage and frequency) match the mains electrical supply. If in doubt contact an electrician. Do not use an extension cord to connect this appliance to the power supply. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating).
IMPORTANT SAFETY INSTRUCTIONS Use Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children. The drum door glass will be hot when washing at very high temperatures. Do not touch the glass. Danger of burns! Keep children away from the washer when in use. Only use the washing machine to wash items which are specified by the manufacturer to be machine washable on the fabric care label. Any other applications may be dangerous.
IMPORTANT SAFETY INSTRUCTIONS Miele tumble dryers and Miele washing machines can be installed as a washer-dryer stack. A Miele washer-dryer stacking kit is required as an optional accessory for this. Please ensure that the washer-dryer stacking kit is suitable for the Miele tumble dryer and the Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference. These devices must accept any interference received, including interference that may cause undesired operation.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Guide to the washer Control panel a Control field The control field consists of a time display and various sensor buttons. The individual sensor buttons are explained in the following sections. e Indicator lights Lights up if there are faults affecting the water intake and drainage. b Temperature sensor buttons for selecting the temperature. Lights up if excess detergent was used. c Spin speed sensor buttons for selecting the final spin speed.
Guide to the washer g Time display After the program has started, the program duration will appear on the display in hours and minutes. When Delay Start is being used, the program duration will appear after the delay-stat period has elapsed. h sensor buttons The delay-start period selected will appear on the time display. After the program has started, the delay-start period will begin to count down.
Before using for the first time Damage from incorrect installation and connection. Installing and connecting the washing machine incorrectly will cause serious damage to property. See “Installation”. Removing the protective film and stickers Remove: - any protective film from the door - any stickers from the front and from the lid Please do not remove any labels (e.g., the data plate) which are visible when you open the door.
Before using for the first time Miele@home Your washing machine is equipped with an integrated WiFi module. To use this feature, you will need: - A WiFi network - The Miele@mobile app - A Miele user account. The user account can be created via the Miele@mobile app. The Miele@mobile app will guide you as you connect your washing machine to your home WiFi network.
Before using for the first time 1. Removing the shipping struts Damage resulting from failure to remove the shipping struts. Failure to remove the shipping struts can result in damage to the washing machine and to adjacent cabinetry or appliances. Remove the shipping struts as described in “Installation and connection”. 2. Setting up Miele@home There are 2 ways of connecting: 1. via the Miele app (default) 2. via WPS To do so, you will need a WPScompatible router.
Before using for the first time 3. Starting the calibration program Opening the door at the end of the program For optimum water and energy consumption and excellent wash results, it is important to calibrate the washing machine. The door remains locked during the Anti-crease phase. The control field lights up for the first 10 minutes. The control field then goes out and the Start/Add laundry sensor button flashes. To do this, the Normal program must be run without laundry and without detergent.
Environmentally friendly washing Energy and water consumption Detergent consumption - Make use of the maximum load that the wash program can accommodate. This will keep the energy and water consumption to a minimum in relation to the size of the load. - Do not exceed the amounts of detergent recommended on the packaging. - When smaller amounts of laundry are washed, the washing machine’s automatic load control system will reduce the amount of water and energy used.
1. Prepare the laundry Tip: Stains (such as blood, egg, coffee, and tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Please contact Miele directly or submit a request via Internet page to obtain or view a copy of this manual. Damage due to solvent-based Empty all pockets. Damage due to foreign objects. Nails, coins, paper clips, and so on can cause damage to garments and components in the machine.
2. Selecting a program Switching on the washing machine Turn the program selector to a program. 1. Selecting wash programs using the program selector Turn the program selector to the required program. The program duration appears on the time display. 2. Selecting programs via the MobileStart program selector position and the Miele app Tip: To use MobileStart , the washing machine must be logged on to the WiFi network and Remote control must be switched on.
3. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this reduces cleaning efficiency and causes creasing. Unfold the laundry and load loosely in the drum.
4. Selecting program settings Selecting a temperature and spin speed The wash program’s pre-set temperature and spin speed light up brightly. The choice of temperatures and spin speeds selectable for the wash program light up dimly. Selecting extra options The selection of extra options available for the wash program lights up dimly. The temperatures reached inside the washing machine might not be the same as the temperatures selected.
5. Add detergent Detergent dispenser drawer This washing machine requires high efficiency detergent. Adhere strictly to the dispensing amounts supplied by the detergent manufacturer. The detergents must be marked with the following label: Using chlorine bleach Damage due to chlorine bleach. Textiles may be discolored or their fibers damaged. Only use chlorine bleach on suitable textiles. Chlorination must be activated in the programmable functions before chlorine bleach is first used.
5. Add detergent Adding fabric softener Tips for dispensing Adjust the detergent dosage to the level of soiling of the laundry and the maximum load. Reduce the amount of detergent with smaller loads (e.g., reduce the amount of detergent by ⅓ when washing a half load). Too little detergent: - The laundry is not cleaned properly and may become gray and hard to the touch over time. Add the fabric softener or the liquid starch to the compartment. Do not exceed the maximum level mark.
5. Add detergent CapDosing Inserting a capsule Three different types of capsule are available: Open the detergent dispenser drawer. = Fabric care (e.g., fabric softener, proofing agent) = Additives (e.g., detergent enhancers) = Detergent (for the main wash only) Each capsule contains the correct amount for one wash cycle. Capsules are available to order from Miele’s online store, Miele customer service, or your Miele dealer. Open the lid of the / compartment.
5. Add detergent Switching off/Changing CapDosing In order to switch off CapDosing, touch the brightly lit sensor button. In order to change CapDosing, touch one of the other capsule sensor buttons. Color run and dye removers Damage due to color run/dye Close the lid and press it firmly shut. Close the detergent dispenser drawer. The capsule is opened by the act of inserting it in the detergent dispenser drawer.
6. Starting a program Starting a program Touch the flashing Start/Add laundry sensor button. The door will lock and the wash program will start. If a delay-start period has been selected, this counts down on the time display. At the end of the delay-start period or immediately after the program has started, the program duration will appear on the time display. Energy savings After 10 minutes, the indicators dim. The Start/Add laundry sensor button flashes.
7. Program end Opening the door and removing the laundry The door remains locked during the Anti-crease phase. The control field lights up for the first 10 minutes. The control field then goes out and the Start/Add laundry sensor button flashes. Items left in the drum could discolor other items in the next wash or become discolored themselves. Remove all items from the drum. Turn the program selector to the position. appears on the time display and the indicator light goes out.
Spin cycle Final spin speed Program Selectable spin speeds in words and numbers (rpm) Max 1,600 High 1,200 Med 800 Slow 600 Normal – – – X X Delicates – – X X X Sanitize X – – X X Handwash – X X X X Dress Shirts – – X X – Darks/Denims – X X X X Express – X X X X Extra White X – – X X Outdoor – – X X X Proofing – X X X X Drain/Spin X X X – X 29
Spin cycle Final spin speed in wash program Rinse-spin When a program is selected, the sensor button for the optimum spin speed for that program will be brightly lit up on the control field. There is a spin cycle after the main wash and between the rinse cycles. A reduction in the final spin speed will also reduce the interim spin speed as appropriate. A faster spin speed can be selected for certain wash programs.
Delay start/SmartStart Delay Start With the Delay Start function, you can delay the start of the program. This function is active when the SmartGrid programmable function is switched off. You can delay the start of a program from 30 minutes up to a maximum of 24 hours. This allows you to make use of night-time economy electricity rates, for example. Turn the program selector to the position. Turn the program selector to any program. Rotating bars ... ...
Delay start/SmartStart SmartStart The SmartStart function lets you define a time period during which your washing machine will start automatically based on an external signal. The start takes place via a signal, e.g., from your energy supplier, that indicates that the electricity rate is particularly economical. Please check with your local utility provider for availability. This function is active when the SmartGrid programmable function is switched on.
Program guide Temperature with garment care label symbols Item/Tip Normal Full load (17.6 lb/8 kg) Hot+ 140°F/60°C Hot 120°F/50°C Cotton, linen, and mixed fiber textiles made of both cotton and linen. Warm+ 105°F/40°C Warm 85°F/30°C Cold Cold USA test program in accordance with: DOE Federal Register 10 CFR Part 430 Appendix J2 to subpart B Canada test program in accordance with: CAN/CSA-C360-13 Delicates Small load (6.
Program guide Temperature with garment care label symbols Dress Shirts Small load (4.4 lb/2 kg) Hot+ 140°F/60°C Hot 120°F/50°C Warm+ 105°F/40°C Warm 85°F/30°C Cold Cold Darks/Denims Warm+ 105°F/40°C Warm 85°F/30°C Cold Cold Express 105°F/40°C 85°F/30°C Cold Cold Extra White Hot+ 34 Pre-treat collars and cuffs depending on the level of soiling. Wash dress shirts and silk blouses in the Delicates program. Small load (4.
Program guide Temperature with garment care label symbols Item/Tip Outdoor Small load (5.5 lb/2.5 kg) Warm+ 105°F/40°C Warm 85°F/30°C Cold Cold Performance outerwear (e.g., jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc. - Zip up or close any jackets with Velcro before washing. - Do not use fabric softener. - If required, these garments can also be reproofed using the Proofing program. Reproofing after each wash cycle is not recommended.
Extra options You can supplement the wash programs with extra options. Extra options are selected and deselected using the relevant sensor buttons on the control field. SoftSteam In order to reduce creasing, the laundry undergoes a smoothing process at the end of the program. Reducing the maximum load by 50% will give a better result. Small loads give a better result. The garments must be suitable for drying in a tumble dryer and suitable for ironing .
Wash program overview – extra options The following extra options can be selected in addition to the programs Lightly soiled Heavy soiled SoftSteam Buzzer Normal – Delicates Sanitize Handwash – – Dress Shirts Darks/Denims Express – – Extra White – Outdoor – Proofing – – – Drain/Spin – – – = Can be selected = Activated automatically – = Cannot be selected 37
Program sequence Main wash Rinses Water level Wash rhythm Water level Rinses Normal 2-3 Delicates 2-4 Sanitize 3-4 Handwash 2 Spin cycle 1,2 1,2 1,2 2 1,2 Dress Shirts 3-4 Darks/Denims 3-5 Express 2 Extra White 2-5 Outdoor Proofing – Drain/Spin – – 1,2 3-4 2 1 – – Please see the next page for a description of the symbols.
Program sequence = low water level = medium water level = high water level = intensive rhythm = normal rhythm = sensitive rhythm = ultra sensitive rhythm = handwash rhythm = carried out – = not carried out This washing machine has fully electronic controls with automatic load control. The washing machine takes in the right amount of water required for the program depending on the amount of laundry and its absorbency rate.
Changing the program sequence Changing a program (safety lock) A program, temperature, spin speed, or selected extra options cannot be changed once the machine has been successfully started. This prevents the machine being operated unintentionally, e.g., by children. If the washing machine is switched off during active program operation, the standby function does not switch the washing machine off completely after 15 minutes.
Detergent Detergents recommended by Miele Miele Detergents have been specially designed for day-to-day use in Miele Washing Machines. See “Detergents and care products” for more information about these detergents.
Detergent General detergent recommendations The wash programs that are not listed do not have a detergent recommendation 1 Universal detergent Color detergent Detergent for Woolens and delicates Bleach Normal – Delicates – – – Sanitize – Handwash – – – Dress Shirts – Darks/Denims – – Express – 2 – – Extra White – – Outdoor – – – Recommended 1 If the “Bleach” setting has been activated – 2 Liquid detergent 42 Not re
Cleaning and care Cleaning the housing and control panel Risk of electric shock. Mains voltage is present when the washing machine is switched off Disconnect the machine from the electricity supply before cleaning or maintenance. Risk of damage due to ingress of water. The pressure of a water jet can cause water to get into the washing machine, resulting in damage to components. Do not spray the washing machine with a water jet when hosing down.
Cleaning and care Removing and cleaning the insert for liquid detergents An insert for liquid detergents is located in the compartment of the detergent dispenser drawer. Cleaning the compartment Compartment 1 has a siphon for better dispensing of the chlorine bleach. Remove the release catch. Remove the insert. Clean the insert thoroughly with warm water. Remove and clean the siphon. Clean the and compartments with warm water.
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. The siphon in the / compartment no longer works and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times. Clean the fabric softener channel with a brush and warm water. Cleaning the detergent dispenser drawer housing 1. Remove the siphon from the compartment and clean under warm running water. Clean the siphon tube in the same way. 2.
Cleaning and care Sanitize info (Cleaning the drum) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odors to build up in the washing machine. Use the Sanitize program to clean the washing machine. Clean the drum no later than the point at which the indicator light and light up on the time display. Clean the filter. Reassemble in reverse order.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. A wash program cannot be started Problem Possible cause and solution The control field remains dark. There is no power to the machine. Check whether the plug is plugged in.
Frequently Asked Questions The program is canceled and a fault indicator light lights up on the control field Problem Possible cause and solution The fault indicator light lights up, and appear alternately on the time display, and the buzzer sounds. The drain is blocked or restricted. The drain hose has been fixed too high. Clean the filter and the pump. The maximum drain height is 39 ⅜" (1 m).
Frequently Asked Questions During the program sequence, a symbol appears on the time display Message Possible cause and solution is lit up on the time display. The program selector was moved to a different position after the program had started. Turn the program selector back to the original position. lights up briefly on The washing machine is indicating that it is the time display when a networked. program is selected. lights up on the time The remote control function is switched off.
Frequently Asked Questions At the end of the program, an indicator light lights up on the control field Problem Possible cause and solution The indicator light lights up. Excessive foam has built up during washing. Use less detergent next time and follow the manufacturer’s instructions on dosage given on the packaging. The indicator light lights up and appears on the time display. When washing, a wash program using a temperature of Hot+ has not been run for a long time.
Frequently Asked Questions General problems with the washer Problem Possible cause and solution The washing machine is The indicator light lighting up and appearing on emitting an odor. the time display was ignored. When washing, a wash program using a temperature of Hot+ has not been run for a long time. In order to prevent bacteria and unpleasant odors building up in the washing machine, run the Sanitize program using a universal powder detergent.
Frequently Asked Questions General problems with the washing machine Problem Possible cause and solution Large amounts of deter- The water pressure is too low. gent residue remain in Clean the filter in the water intake. the detergent dispens- Please note that the water pressure must be at ing drawer. least 14.5 psi (100 kPa). Powder detergent used in conjunction with water softeners tends to become sticky.
Frequently Asked Questions Poor wash results Problem Possible cause and solution Liquid detergent is not achieving the required results. Liquid detergents do not usually contain bleaching agents. Consequently, fruit, coffee, and tea stains cannot always be removed. Use powder detergent containing a bleaching agent. Use the appropriate capsule or add stain removers to the compartment. Never put stain removers and liquid detergent together in the detergent dispenser drawer.
Frequently Asked Questions The drum door cannot be opened Problem Possible cause and solution The door cannot be pulled open during a program. The drum is locked during a program. Follow the description in “5. Starting a program – Adding or removing laundry”. After the program is canceled, flashing bars ......... appear on the time display. To protect the user against scalding, the door cannot be opened if the suds temperature is higher than 130°F (55°C).
Frequently Asked Questions Opening the door in the event of a blocked drain outlet and/ or power outage Turn off the washing machine. Draining the washing machine Remove the drain filter, though not completely. Place a suitable container under the flap, e.g., a bowl or dish. Open the drain pump flap. Blocked drain outlet If the drain outlet is blocked, a larger quantity of water can remain in the washing machine. Risk of scalding due to hot suds.
Frequently Asked Questions Opening the door Danger of injury due to rotating drum. Reaching into a rotating drum is extremely dangerous and may result in injury. Always make sure that the drum is stationary before reaching in to remove laundry. Clean the drain filter thoroughly. Remove any foreign objects (e.g., buttons, coins, etc.) and clean the interior. Turn the impellers by hand to check that they rotate freely. Replace the drain filter correctly and tighten it securely.
Customer Service Contact in the event of a fault Optional accessories In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. Optional accessories are available through your Miele dealer or Miele. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document.
Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
*INSTALLATION* Installation Front view a Drain hose f Detergent dispenser drawer b Hot-water inlet hose (pressure-proof to 870 psi/6,000 kPa) g Door c Cold-water inlet hose (pressureproof to 870 psi/6,000 kPa) d Electrical connection h Flap for drain filters, drain pump, and emergency release i Flap for TwinDos cartridges j Four height-adjustable feet e Control panel 59
*INSTALLATION* Installation Rear view a Drain hose b Transport clips for inlet and drain hoses and power cord c Electrical connection d Protruding lid for holding when moving the machine 60 e Cold-water inlet hose (pressureproof to 870 psi/6,000 kPa) f Hot-water inlet hose (pressure-proof to 870 psi/6,000 kPa) g Safety caps for shipping struts h Transport clips for inlet and drain hoses and for storing shipping struts when not in use
*INSTALLATION* Installation Installation surface A concrete floor is the most suitable installation surface for this machine. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: The machine must be level and securely positioned. To avoid vibrations during spinning, the machine should not be installed on soft floor coverings. If installing on a wooden joist floor: Install the unit on a 2 ft. x 2 ft.
*INSTALLATION* Installation Removing the shipping struts Removing the right-hand shipping strut Removing the left-hand shipping strut Open the cover and use the wrench supplied with the washing machine to turn the shipping strut 90°. Open the cover and use the wrench supplied with the washing machine to turn the shipping strut 90°. Pull out the shipping strut. Pull out the shipping strut.
*INSTALLATION* Installation Covering the holes Securing the shipping struts Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. Cover the holes for the shipping struts after they have been removed. Secure the shipping struts to the back of the washing machine. Make sure that the top catch is located above the holder. Risk of damage from incorrect Press the covers firmly shut until they click into place. transport.
*INSTALLATION* Installation Installing the shipping struts Opening the covers Press against the catch with a thin object (a narrow screwdriver, for example). The cover opens. Installing the shipping struts Install the shipping struts by following the instructions for their removal in reverse order. Tip: The struts will slide in more easily if you lift the drum slightly.
*INSTALLATION* Installation Leveling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electric and water consumption and may cause the machine to move about. Unscrewing and adjusting the feet The four adjustable screw feet are used to level the washing machine. All four feet are screwed in when the machine is delivered. Use a spirit level to check that the washing machine is standing level.
*INSTALLATION* Installation Installing under a countertop Risk of electric shock due to exposed cables There is a risk of coming into contact with live parts while the lid is removed. Do not remove the washing machine lid. This washing machine (with lid intact) can be pushed under a countertop if there is space to do so. Washer-dryer stack The washing machine can be installed as a washer-dryer stack together with a Miele Tumble Dryer. A WTV stacking kit* is required for this.
*INSTALLATION* Installation Additional installation requirements Setting up the cabinet The washing machine must be installed in accordance with the relevant local regulations. Damage resulting from failure to remove the shipping struts. Failure to remove the shipping struts can result in damage to the washing machine and to adjacent cabinetry or appliances. Remove the shipping struts as described in “Installation and connection”.
*INSTALLATION* Installation For closets at room height You can also insert a ventilation opening at the top of the closet. In addition, you must provide an opening on the bottom side of the door. Product Dimensions Dimensions Risk of damage due to overheating of the washing machine. The air supply must not be hindered by an additional closet or shelf. Please ensure that air is able to circulate freely at the top of the closet. = 4.9 ft (1.
*INSTALLATION* Installation Installation on a plinth - WTS 510 (only available in white) Washer-dryer stack - WTV 512 and WTV 502 washer-dryer stacking kit 69
*INSTALLATION* Installation The water protection system The Miele water protection system protects all parts of the washing machine and its surroundings from water damage. The system consists of the following main components: - the inlet hose - the electronic module and drainage and overflow protection - the drain hose Inlet hoses - Protection against the hoses bursting The inlet hose can withstand pressure of more than 1,015 psi (7,000 kPa).
*INSTALLATION* Installation Water intake Health risk and risk of damage due to contaminated incoming water. The quality of the incoming water must comply with the requirements for drinking water in the country in which the washing machine is being operated. Always connect the washing machine to the drinking water supply. Maintenance Only use a genuine Miele hose that has been tested to withstand pressure of at least 870 psi (6,000 kPa) should you ever need a replacement.
*INSTALLATION* Installation Water drainage The suds are drained through a drain pump with a 3.2 ft (1 m) delivery head. For the water to drain freely, the hose must be installed free of kinks. If required, the hose can be extended to a length of up to 16.4 ft (5 m). Accessories are available from your Miele dealer or Miele Customer Service. For a delivery head of more than 3.2 ft (1 m) (up to a max. of 5.9 ft (1.8 m)) a replacement drain pump will need to be installed.
*INSTALLATION* Installation Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 1/16" (636 mm) Depth with door open 41 1/2" (1054 mm) Height for building under 32 5/16" (+5/16"/-1/16") (820 mm) Width for building under 23 5/8" (600 mm) Weight Approx. 220.5 lb (100 kg) Capacity 17,6 lb/8 kg dry laundry Connection voltage See data tag Rated load See data tag Fuse rating See data tag Minimum water flow pressure 14.
Programmable functions The programmable functions are used to alter the machine’s electronics to suit changing requirements. Programmable functions can be altered at any time.
Programmable functions Editing and saving the programmable function Confirm the chosen selection with the Start/Add laundry sensor button. You can either switch a programmable function on/off or select different options. The number of the programmable function, e.g., , will then light up again.
Programmable functions PIN code The PIN code prevents the washing machine being used without your knowledge. When the PIN code has been activated, you have to enter it after switching the washing machine on. Otherwise, the washing machine cannot be operated. Options = PIN code is switched off (factory setting) = PIN code is switched on Using the washing machine with a PIN code The code is 125 and cannot be altered. Switch on the washing machine.
Programmable functions Memory The washing machine will save the last settings (temperature, spin speed, and some of the extra options) selected for a wash program after the program has started. When the program is chosen again, the saved settings will appear on the display. Options = Memory is switched off (factory setting) = Memory is switched on Gentle action When Gentle action is activated, drum rotation is reduced. In this way, lightly soiled items can be washed more gently.
Programmable functions Suds cooling Additional water flows into the drum at the end of the main wash to cool the suds down. Anti-crease The Anti-crease function helps prevent creasing after the end of the program. Suds cooling takes place when a Normal program with a temperature of 158°F (70°C) or higher is selected. At the end of the program, the drum continues to turn for up to 30 minutes. The door can be opened at any time during the Anti-crease phase.
Programmable functions Chlorine bleach You can activate the automatic addition of chlorine bleach at the end of the main wash. Chlorine bleach may only be used in some programs. See “5. Adding detergent – Using chlorine bleach” for more detailed information. Welcome tone The welcome tone sounds whenever the washing machine is switched on. You can switch the welcome tone on or off.
Programmable functions Networking The , , and programmable functions are only displayed if the requirements for using Miele@home have been met (see “Before using for the first time – Miele@home”). Remote control You can use the Miele app to check the status of your washing machine from anywhere and start it remotely. You can also control it remotely via the MobileStart program.
Programmable functions RemoteUpdate The RemoteUpdate function updates the software in your washing machine. If an update is available for your washing machine, it will automatically download it. Updates will not be installed automatically. They must be initiated manually. - Some software updates can only be carried out by Miele Customer Service. Activating/deactivating If you do not install an update, you can continue to use your washing machine in the usual way.
Programmable functions Postponing the update Switching off WiFi After the washing machine is switched on, appears on the time display. Turn the program selector to the MobileStart program. Touch the sensor button. appears on the time display. The duration of the selected program appears on the time display. Touch the sensor button and hold the sensor button until the countdown on the time display has finished.
Detergents and care products Detergent, fabric care products, additives, and machine care products are available for this washing machine. All the products have been designed for Miele washing machines. These and many other useful products can be ordered via the Miele online shop, from your Miele dealer, or from Miele directly (see end of this manual for contact details).
Detergents and care products Special-purpose detergents These special-purpose detergents are available as convenient single-use capsules.
Detergents and care products Fabric care Machine care These fabric-care products are available as convenient single-use capsules.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
WXD 160 en-US M.-Nr.
