Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Add detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Delay start/SmartStart
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- The program is canceled and a fault indicator light lights up on the control field
- During the program sequence, a symbol appears on the time display
- At the end of the program, an indicator light lights up on the control field
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- Buzzer
- Keypad tone
- PIN code
- switch-off status
- Memory
- Water intake
- Gentle action
- Reducing the temperature
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Chlorine bleach
- Display brightness dimmed
- Welcome tone
- Networking
- Remote control
- SmartGrid
- RemoteUpdate
- Switching off WiFi
- Detergents and care products
Guide to the washer
12
Control panel
a
Control field
The control field consists of a time
display and various sensor buttons.
The individual sensor buttons are
explained in the following sections.
b
Temperature sensor buttons
for selecting the temperature.
c
Spin speed sensor buttons
for selecting the final spin speed.
d
Sensor buttons for extra options
You can supplement the wash
programs with extra options.
If a wash program has been
selected, the sensor buttons for the
possible extras light up dimly.
e
Indicator lights
Lights up if there are faults
affecting the water intake and
drainage.
Lights up if excess detergent
was used.
Lights up together with in the
time display as a reminder
about hygiene information.
The Add laundry function
cannot be selected.
f
CapDosing sensor buttons
CapDosing of fabric-care
products (e.g., fabric softener,
proofing agent)
CapDosing of additives (e.g.,
detergent enhancers)
CapDosing of detergent (for the
main wash only)