User manual
Problem solving guide
69
Fault message at the end of a programme
Problem Cause and remedy
Check dosage
Excessive foam has built up during washing.
With TwinDos, check the dosage amount set.
Reduce the amount set in 10% increments.
Use less detergent next time and follow the manu-
facturer's instructions on dosage given on the
packaging.
Hygiene info: run a
programme at min.
75 °C or the "Clean
machine" pro-
gramme
When washing, a wash programme using a temperat-
ure above 60°C has not been run for a long time.
Turn the programme selector toFurther pro-
grammes/.
Touch the sensor controls until Maintenance
appears in the display.
Touch the OKsensor control.
The following appears in the display: Clean machine
Touch the OKsensor control.
Run the Clean machine programme using Miele ma-
chine cleaner or a universal powder detergent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OKsensor control.