User manual

4. Select programme settings
31
SmartStart
The SmartStart function lets you
define a period of time during which
your washing machine will start auto-
matically. The appliance will start on
receipt of a signal, e.g. from your en-
ergy supplier, that indicates that the
electricity tariff is particularly econom-
ical.
This function is active when the
SmartGrid setting is switched on.
The time period can be defined
between 15minutes and 24hours. Dur-
ing this period, the washing machine
waits for the signal from the energy
supplier. If no signal is sent during the
defined period, the washing machine
starts the wash programme.
Setting the time period
If you have activated the SmartGrid
function in Settings, SmartStart in in-
stead of Start in will appear in the dis-
play when you touch the sensor
control (see “Settings – SmartGrid”).
The procedure for setting this is the
same as for setting the time for delay
start.
 Use thesensor controls to enter
the hour and confirm your entry with
the OK sensor control.
The hour will be saved and the minute
number block will be highlighted.
 Use thesensor controls to enter
the minutes and confirm your entry
with the OK sensor control.
 Press the Start/Add laundrysensor
control to start the wash programme
with SmartStart.
The following will appear in the display:
SmartStart
OK




