User manual

4. Select programme settings
30
 Delay start/SmartStart
Delay start
With the delay start function, you can
delay the start of the programme.
This function is active when the set-
ting SmartGrid is switched off.
The hours can be set from 00 to 24.
The minutes can be set in 15minute in-
crements from 00 to 45.
Setting the delay start time
 Touch the sensor control.
The following will appear in the display:
Start in
OK




h:0000
 Set the hours with thesensor
controls. Confirm with the OKsensor
control.
The display will change:
Start in
OK




h:0006
 Set the minutes with thesensor
controls. Confirm with the OKsensor
control.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on thesensor control.
Cancelling delay start
The selected delay start period can be
cancelled before the programme starts.
 Touch the sensor control.
The selected delay start period will ap-
pear in the display.
 Set a time value of 00:00 h with
the sensor controls. Confirm
with the OKsensor control.
The selected delay start time has been
cancelled.
After the programme has started, the
selected delay start period can only be
changed or cancelled by interrupting
the programme.
Altering delay start
The selected delay start time period can
be changed before the programme
start.
 Touch the sensor control.
 Change the specified time and con-
firm with the OK sensor control.