Operating instructions/Installation instructions

6. Start the program - Program end
36
Starting a program
 Touch the flashing Start/Stop sensor
button.
The door will lock ( will appear in the
display to show this) and the wash
program will start.
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the program
has started (if no delay start time has
been selected), the program duration
will appear in the time display.
Energy savings
After 10minutes, the indicators dim.
The Start/Stop sensor button will light
up, flashing.
You can reactivate the indicators:
 Touch the Start/Stop sensor button
(this does not have any effect on a
running program).
The drum lighting switches off once the
program has started.
Program end
The door is still locked during the Anti-
crease phase and the following will
appear alternately in the display:
End/Anti-Crease
OK





and
Press Stop button
OK





 Touch the Start/Stop sensor button.
The door will be unlocked.
 Pull open the door.
 Remove the laundry.
Items left in the drum could discolor
other items in the next wash or
become discolored themselves.
Remove all items from the drum.
 Check the folds in the door seal for
any foreign objects.
Tip: Leave the door slightly open to
allow the drum to dry.
 Turn the program selector to the 
position. This switches the washing
machine off.
 If applicable, remove the used
capsule from the detergent dispenser
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.