Operating and Installation Instructions Washer To prevent accidents and appliance damage, read these instructions before installation or use. en-US M.-Nr.
Contents Caring for the environment .................................................................................. 6 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 7 Guide to the washer ............................................................................................ Control panel ......................................................................................................... Operating the sensor buttons.................................
Contents Spin cycle ............................................................................................................. Final spin speed in the wash program .................................................................. Rinse-spin ........................................................................................................ Omitting the final spin (Rinse hold)................................................................... Deselecting the rinse-spin and final spin ................
Contents Technical Service................................................................................................. Contact in case of fault ......................................................................................... Optional accessories............................................................................................. Warranty ................................................................................................................ 61 61 61 61 Installation...........
Contents Display switch-off.................................................................................................. Program info .......................................................................................................... Memory ................................................................................................................. Water intake .......................................................................................................... Long p-wash Normal.......
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before using the appliance. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
IMPORTANT SAFETY INSTRUCTIONS Before connecting the machine, ensure that the connection data on the data plate (fusing, voltage and frequency) match the mains electrical supply. If in doubt contact an electrician. Do not use an extension cord to connect this appliance to the power supply. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating).
IMPORTANT SAFETY INSTRUCTIONS Use Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children. The drum door glass will be hot when washing at very high temperatures. Do not touch the glass. Danger of burns! Keep children away from the washer when in use. Only use the washing machine to wash items which are specified by the manufacturer to be machine washable on the fabric care label. Any other applications may be dangerous.
IMPORTANT SAFETY INSTRUCTIONS Miele tumble dryers and Miele washing machines can be installed as a washer-dryer stack. A Miele washer-dryer connection kit is required as an optional accessory for this. Please ensure that the washer-dryer connection kit is suitable for the Miele tumble dryer and the Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference. These devices must accept any interference received, including interference that may cause undesired operation.
Guide to the washer Control panel a Control field The control field consists of a display and various sensor buttons. The individual sensor buttons are explained in the following sections. b Display The following values are displayed and/or selected on the display: 1. The temperature, spin speed, and time left for the selected wash program. 2. The individual values of the selection lists for extras and settings. c Sensor buttons The values in the display can be changed with the sensor buttons.
Guide to the washer h Sensor button You can specify the level of soiling of the load in three settings. – Light – Normal – Heavy The wash program changes depending on which level of soiling is selected. i Sensor button Activate detergent dispensing with a capsule by using the sensor buttons. j Sensor button The sensor button starts the delay start function. With the delay start function, you can delay the start of the program.
Guide to the washer Setting numerical values Display The standard display shows the following values from left to right: Warm + Max 1:26 OK – The selected wash temperature – The selected spin speed – The program duration Start in 00 :00 h The numerical value is highlighted in white. Touching the sensor button decreases the value. Touching the sensor button increases the value. The OK sensor button is used to activate the value in the display.
Environmentally friendly washing Energy and water consumption Detergent consumption – Make use of the maximum load of the respective wash program. The energy and water consumption will then be the lowest in relation to the size of the load. – Do not exceed the amounts of detergent recommended on the packaging. – When smaller amounts of laundry are washed, the washing machine's automatic load control system will reduce the amount of water and energy used.
Before using for the first time Before initial commissioning, please note the information in "Installation and connection". Removing the protective foil and stickers Remove the drain hose elbow from the drum An elbow piece for the drain hose is stored in the drum. Remove: – The protective foil from the door – Any stickers from the front and the lid Please do not remove any labels (e.g., the data plate) which are visible when you open the door.
Before using for the first time Switching on the washing machine Turn the program selector to the Normal program. The welcome tone will sound and the welcome screen will light up. The display will guide you through the 4 steps of the initial commissioning. 1. Setting the display text You are requested to set the display language. It is possible to change the language at any time by setting the program selector to the Additional programs/ position in the Settings submenu.
Before using for the first time Miele@mobile App Connecting via the app The Miele@mobile App is available to download free of charge from the Apple ® App Store or from the Google Play Store™. The Miele@mobile app can be used to connect to your network. Install the Miele@mobile app on your mobile device. Follow the instructions in the app. To log in you will need: 1. Your WiFi network password 2.
Before using for the first time 3. Removing the shipping struts Failure to remove the shipping struts can result in damage to the washing machine and to adjacent cabinetry or appliances. Remove the shipping struts as described in the "Installation" section. The following message appears in the display: Remove shipping struts Confirm with the OK sensor button. 4. Starting the calibration program Touch the sensor button until the OK sensor button lights up and confirm this with OK.
1. Prepare the laundry Solvent-based cleaners (e.g., benzene) can damage plastic parts. When pre-treating a stain, make sure that plastic parts do not come into contact with cleaning agent. Chemical (solvent-based) cleaning agents can cause damage in the washing machine. Never use such cleaning agents in the washing machine! Empty all pockets. Foreign objects left in pockets (e.g. nails, coins, paper clips, etc.) can cause damage to clothes and the machine.
2. Selecting a program Switching on the washing machine Turn the program selector to a program. 2. Selecting additional programs by setting the program selector to the "More programs/" position and the display: The interior drum lighting will come on. The drum lighting will go out automatically after five minutes. Program selection There are three possible ways to select a program: 1.
2. Selecting a program 3. Selecting the programs via the MobileControl program selector position and the Miele@mobile app Tip: In order to use MobileControl , the washing machine must be logged on to the WiFi network and the Remote control must be switched on. Turn the program selector to the MobileControl position. The following appears in the display: Load laundry, close the door and press "Start".
3. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this reduces cleaning efficiency and causes creasing. Unfold the laundry and load loosely in the drum.
4. Selecting program settings Selecting a temperature/spin speed You can alter the preset temperature/ spin speed of a wash program if this is permitted by the program. Warm + Max 1:26 OK Touch the sensor buttons above or below the temperature or spin speed value in the display until the temperature/spin speed you want appears in the display. Confirm with the OK sensor button. Selecting an extra option Extras sensor button You can select additional extras using the Extras sensor button.
4. Selecting program settings Level of soiling Setting the delay start time You can specify the level of soiling of the load. Touch the sensor button. – Light No visible soiling or stains – Normal Visible soiling and/or a small number of light stains visible – Heavy Soiling and/or stains clearly visible.
4. Selecting program settings Canceling delay start The selected delay start time can be canceled before the program start. Touch the sensor button. The selected delay start time will appear in the display. Set a time value of 00:00 h with the sensor buttons. Confirm with the OK sensor button. The selected delay start time has been canceled. After the program start, the selected delay start time can only be changed or canceled by interrupting the program.
5. Adding detergent There are several options for adding detergent to the washing machine. Detergent dispenser drawer This washing machine requires high efficiency detergent. Adhere strictly to the dispensing amounts supplied by the detergent manufacturer. The detergents must be marked with the following label: Filling with detergent Tips for dispensing Adjust the detergent dosage to the level of soiling of the laundry and the maximum load. Reduce the amount of detergent with smaller loads (e.g.
5. Adding detergent Using chlorine bleach Chlorine bleach is a very aggressive substance. It can cause damage to the colors and fibers of textiles. Only use chlorine bleach on suitable textiles. Chlorination must be activated in the settings before chlorine bleach is first used. Chlorine bleach may be used in the following programs: – Normal Using powder detergent The detergent dispenser drawer contains an insert for liquid detergent in the compartment.
5. Adding detergent Using fabric softener and liquid starch Fabric softeners make garments soft to handle and help prevent static cling when tumble drying. Liquid starch is synthetic and provides good stiffness to fabric. Natural starch stiffens and gives body to fabric. CapDosing Capsules contain corrosive ingredients and irritants. Children could come into contact with the ingredients or swallow them. Keep capsules out of the reach of children.
5. Adding detergent Inserting a capsule Open the detergent dispenser drawer. Close the lid and press it firmly shut. Open the lid of the / compartment. Press the capsule in firmly. 30 Close the detergent dispenser drawer. The capsule is opened by the act of inserting it in the detergent dispenser drawer. The contents can run out of the capsule if you then remove it from the drawer before it is used. In this case, dispose of the capsule and do not re-use it.
5. Adding detergent The contents of the capsule will be added to the wash program at the correct time. During CapDosing, water intake to the compartment is solely via the capsule. No additional fabric softener may be added to the compartment when using a capsule. Remove the empty capsule at the end of the wash program. Dyes / dye removers Do not use dye removers in this washer! The use of dyes in the washer is recommended only to a degree of usual household use.
6. Start the program - Program end Starting a program Pull open the door. Touch the flashing Start/Stop sensor button. Remove the laundry. The door will lock ( will appear in the display to show this) and the wash program will start. If a delay start time has been selected, then this will count down in the time display. At the end of the delay start time or immediately after the program has started (if no delay start time has been selected), the program duration will appear in the time display.
Spin cycle Final spin speeds Normal – Wrinkle-free – Delicates – Sanitize 0 rpm () 600 rpm Slow 800 rpm Med 1200 rpm High 1600 rpm Selectable spin speeds in words and numbers Max Program – – X X X X X X – X X X X – – X X Handwash – X X X X Dress Shirts – – X X X Express X X X X X Darks/Denims – X X X X Extra White X – – X X Outdoor – – X X X Table Linens/Drapes – X X X X Sportswear – X
Spin cycle Final spin speed in the wash program When a program is selected, the optimum spin speed for the wash program is always shown in the display. A faster spin speed can be selected for certain wash programs. The highest selectable spin speed is indicated in the table. Rinse-spin There is a spin cycle after the main wash and between the rinse cycles. A reduction in the final spin speed will also reduce the interim spin speed as appropriate.
Program guide Programs on the program selector The temperature marked with is pre-set. Temperature with garment care label symbols Normal Full load (17.6 lb/8 kg) Hot + 140°F/60°C Hot 120°F/50°C Warm + Item/Tip 105°F/40°C Warm 85°F/30°C Cold Cold Cotton, linen, and mixed fibre textiles made of both cotton and linen.
Program guide Temperature with garment care label symbols Sanitize Sanitize Full load (17.6 lb/8 kg) 170°F/75°C Handwash Warm + Cotton or linen fabrics with direct skin contact or for which special hygiene requirements apply. Small load (4.4 lb/2 kg) 105°F/40°C Warm 85°F/30°C Cold Cold Dress Shirts For fine textiles which are only suitable for hand washing. Small load (4.
Program guide Temperature with garment care label symbols Darks/Denims Warm + 105°F/40°C Warm 85°F/30°C Cold Cold Extra White Hot + Small load (4.4 lb/2 kg) Black and dark garments made from cotton, mixed fibers, and denim. – Wash inside out. – Denim often contains excess dye and may run during the first few washes. Therefore, wash light and colored items separately. Full load (17.
Program guide Programs positioned on the More programs/ program selector Temperature with garment care label symbols Table Linens/Drapes Hot + 140°F/60°C Hot 120°F/50°C Warm + 105°F/40°C Warm 85°F/30°C Cold Cold Sportswear 140°F/60°C Hot 120°F/50°C 105°F/40°C Warm 85°F/30°C Cold Cold Woolens Warm Cold Cold 38 Table Linens and drapes made of cotton and linen. Sportswear such as jerseys and leggings, as well as microfiber and fleece garments.
Program guide Temperature with garment care label symbols Proofing Warm + 105°F/40°C Item/Tip Small load (5.5 lb/2.5 kg) Treating microfiber fabric, ski wear, or Table Linens made from mainly synthetic fibers to provide a finish which is resistant to water and dirt. – The items should be freshly laundered and spun or dried before proofing. – For best results, the items should be heattreated afterwards, either in a tumble dryer or by ironing. Drain/Spin Full load (17.
Program guide Settings /maintenance Settings You can use the settings to alter the washing machine's electronics to suit changing requirements. See "Settings" for more detailed information. Maintenance The washing machine has a maintenance program. Temperature with garment care label symbols Clean Machine Item/Tip Without load With frequent washing at low temperatures there is a danger of a build-up of bacteria in the washing machine.
Extra options You can supplement the wash programs with extra options. Selecting extra options Extra options are selected or deselected using the sensor buttons in the control field. Additional extra options can be selected on the display using the Extras sensor button. Touch the sensor button for the extra option you want. The relevant button will light up brightly. Not all the extra options can be used with every program.
Extra options Extra options can be selected using the "Options" sensor button Selecting extra options in the display Touch the Options sensor button. The first extra option which can be selected appears in the display. Touch the sensor buttons until the extra option you want appears in the display. Confirm the extra option with the OK sensor button. The extra option has a next to it. Deselecting an extra option Touch the Options sensor button.
Extra options ExtraRinse Gentle Soak Pre-wash Buzzer SoftSteam The following extra options can be selected in addition to the programs Normal – X X X X X Wrinkle-free X X X X X X Delicates X X X X X X Sanitize X X X X X X Handwash – X – – – – Dress Shirts X X X X X X Express X X – – – – Darks/Denims X X X X X X Extra White X X X X X X Outdoor – X X X – X Table Linens/Drapes X X X X X X Sportswear – X X X – X Woolens
Changing the program sequence Canceling a program Interrupting a program You can cancel a wash program at any time after it has started. Turn the program selector to the position. Touch the Start/Stop sensor button. The washing machine switches off. The following will appear in the display: To continue: Turn the program selector to the position of the wash program that was started.
Changing the program sequence Child lock Adding or removing laundry The wash program cannot be interrupted unintentionally. Activating the child lock Touch the Start/Stop sensor button. The following will appear in the display: Cancel Program If the following message no longer appears in the display then it is no longer possible to add items of laundry. Press the Start/Stop button.
Detergent Miele-recommended detergents The Miele detergents have been developed by Miele especially for the Miele washing machine. You can order the Miele detergents from Miele's online store or you can purchase them from Miele's customer service, or your Miele dealer.
Detergent General detergent recommendations The wash programs that are not listed do not have a detergent recommendation.
Cleaning and care Cleaning the drum (Hygiene info) Washing at low temperatures and/or using liquid detergents can cause bacteria and odors to build up in the washing machine. Use the Clean machine program to clean the machine. Note the message in the display: Sanitize info: Run a high temp.
Cleaning and care Removing and cleaning the insert for liquid detergents An insert for liquid detergents is located in the compartment of the detergent dispenser drawer. Cleaning the compartment Compartment 1 has a siphon for better dispensing of the chlorine bleach. Remove the release catch. Remove the insert. Clean the insert thoroughly with warm water. Remove and clean the siphon. Clean the and compartments with warm water.
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. The siphon in the / compartment no longer works and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times. Clean the fabric softener channel with a brush and warm water. Cleaning the detergent dispenser drawer housing 1. Remove the siphon from compartment and clean under warm running water. Clean the siphon tube in the same way. 2.
Cleaning and care Cleaning the water inlet filter Cleaning the filter in the inlet valve The washing machine has two filters to protect the inlet valve. You should inspect the filters approximately every six months, or more often if there are frequent interruptions to the external water supply. Using pliers, carefully loosen the ribbed plastic nut on the inlet valve and unscrew. Cleaning the filter in the inlet hose First turn off the faucet. Unscrew the inlet hose from the faucet.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Some of the messages in the display are more than one line long. Touch the or sensor button to read them in full.
Frequently Asked Questions The following fault message appears in the display and the program has been canceled Message Possible cause and solution The water inlet is blocked or restricted. Check whether the faucet is turned on properly. Check whether the inlet hose is kinked. Check whether there is sufficient water pressure. Water intake See The filter in the water inlet is blocked. Clean the filter. Drainage See The drain is blocked or restricted.
Frequently Asked Questions A message appears in the display at the end of the program or when the appliance is switched on Message Possible cause and solution The smoothing process which the laundry undergoes at the end of the program could not be carried out properly. Check whether the washing machine is aligned correctly as described in "Installation and connection – Leveling the machine". Check whether the maximum delivery height of 39" (1 m) has been exceeded.
Frequently Asked Questions General problems with the washer Problem Possible cause and solution The washing machine is The hygiene info was not observed. A wash program emitting an odor. using a temperature above 140°F (60°C) has not been run for a long period of time. In order to prevent bacteria and unpleasant odors building up in the machine, run the Clean machine program using Miele clean machine or universal powder detergent. The door and detergent dispenser drawer were closed after washing.
Frequently Asked Questions General problems with the washing machine Problem Possible cause and solution There are unusual sounds coming from the drain pump. There is no fault! Lapping sounds at the beginning and end of the drain process are normal. The fabric softener is not completely dispensed or too much water remains in the compartment. The siphon tube is either positioned incorrectly or clogged. Clean the siphon tube, see "Cleaning and care Cleaning the detergent drawer".
Frequently Asked Questions Poor wash results Problem Possible cause and solution Liquid detergent is not achieving the required results. Liquid detergents do not usually contain bleaching agents. Consequently, fruit, coffee, and tea stains cannot always be removed. Use powder detergent containing a bleaching agent. Use the appropriate capsule or add stain removers to the compartment. Never put stain removers and liquid detergent together in the detergent dispenser drawer.
Frequently Asked Questions The drum door cannot be opened Problem Possible cause and solution The door cannot be pulled open during a program. The door is locked during a program. Touch the Start/Stop sensor button. Select Cancel Program or Add laundry in the display using the sensor buttons. The door will unlock and you will be able to pull it open. There is still water in the drum and the machine is unable to drain.
Frequently Asked Questions Opening the drum door during a power failure Blocked drain outlet If the drain outlet is blocked, a larger quantity of water can remain in the washing machine. Draining the washing machine When draining water from the machine, do not unscrew the drain filter completely or take it right out. Place a suitable container under the flap, e.g., a bowl or dish. Danger of scalding if laundry has been washed at a high temperature! Be careful when draining the suds.
Frequently Asked Questions Opening the door Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to remove laundry. Clean it thoroughly. Remove any foreign objects (e.g., buttons, coins, etc.) and clean the interior. Turn the impellers by hand to check that they rotate freely. Replace the drain filter correctly and tighten it securely. Overflowing water from the washing machine can cause damage.
Technical Service Contact in case of fault Optional accessories In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Technical Service. Optional accessories are available through your Miele dealer or Miele. Contact information for Miele Technical Service can be found at the end of this document. Warranty For further information, please refer to your warranty booklet. Please quote the model and serial number of your appliance when contacting Miele.
Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
Installation Front view a Drain hose e Control panel b Hot-water inlet hose (pressure-proof to 1,015 psi/7,000 kPa) f Detergent dispenser drawer c Cold-water inlet hose (pressureproof to 1,015 psi/7,000 kPa) h Flap for drain filters, drain pump, and emergency release d Electrical connection i Four height-adjustable feet g Door 63
Installation Rear view 8 8 a Drain hose b Transport clips for inlet and drain hoses and power cord c Electrical connection d Protruding lid for holding when moving the machine e Cold-water inlet hose (pressureproof to 1,015 psi/7,000 kPa) 64 f Hot-water inlet hose (pressure-proof to 1,015 psi/7,000 kPa) g Safety caps for shipping struts h Transport clips for inlet and drain hoses and for storing shipping struts when not in use
Installation Installation site A concrete floor is the most suitable surface for the washer. Concrete floors are less prone to vibration during the spin cycle than wooden floors. Note: The machine must be leveled and securely positioned. To avoid vibration while spinning, the machine should not be installed on soft floor coverings. If the installation must be performed on a wooden floor: Install the unit on a 2 ft. x 2 ft. x 3 1 /16" (61 x 61 x 3 cm) plywood base.
Installation Using the wrench supplied, turn the left-hand shipping strut 90°, then Turn the right-hand shipping strut 90°, then withdraw the shipping strut. withdraw the shipping strut.
Installation If the holes are not covered, there is a risk of injury. To avoid the risk of injury the holes for the shipping struts must be covered after they have been removed. Secure the shipping struts to the back of the washing machine. Make sure the top catch is located above the holder. The washing machine must not Fit the covers onto the holes. be moved without the shipping struts in place. Store the shipping struts. They must be refitted if the machine is to be moved again (e.g.
Installation Leveling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electric and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered. Use a level to check that the washing machine is standing level. Hold foot 1 securely with a pipe wrench.
Installation Additional installation requirements All installations must be done in accordance with local codes. Remove transport struts in rear of machine before installation. Installing under a worktop The machine lid cannot be re- For closets at room height You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the door. The air must be able to circulate freely at the top of the closet.
Installation Product Dimensions Dimensions = 4.9 ft (1.50 m) drain hose with connection to the top left on the rear = 6.5 ft (2.00 m) electrical cord with plug for 120 V, 15 A (NEMA 5-15 configuration) to the top left on the rear = 5.2 ft (1.
Installation The water protection system The Miele water protection system protects all parts of the washing machine and its surroundings from water damage. The system consists of the following main components: – the inlet hose – the electronic module and drainage and overflow protection – the drain hose Inlet hoses – Protection against the hoses bursting Electronic module and washing machine housing – Sump: Any leaking water is collected in a sump in the base of the machine.
Installation Water intake The washing machine can be connected to a portable water supply. A non-return valve is not needed unless required by building code. The washing machine has ½" (13 mm) pressure hoses with ¾" (19 mm) female hose thread connections. If there is no water hookup, contact a plumber to install a connection. Make sure that the sealing ring is seated properly on the hose connector. Replace the hose only with a genuine Miele hose, or with a hose able to withstand up to 145 psi (10.
Installation Water drainage The suds are drained through a drain pump with a 3.2 ft (1 m) delivery head. For the water to drain freely, the hose must be installed free of kinks. If required, the hose can be extended to a length of up to 16.4 ft (5 m). Accessories are available from your Miele dealer or the Miele Technical Service. Drainage options: 1. Directly into a sink: Lay the hose around the edge of the sink and secure the drain hose so that it does not slip (e.g.
Installation Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 1/16" (636 mm) Depth with door open 41 1/2" (1054 mm) Height for building under 32 5/16" (+5/16"/-1/16") (820 mm) Width for building under 23 5/8" (600 mm) Weight Approx. 220.5 lb (100 kg) Capacity 17.6 lb (8 kg) dry laundry Connection voltage See data plate Power rating See data plate Fuse See data plate Minimum flow pressure 14.
Settings You can use the settings to alter the washing machine's electronics to suit changing requirements. The settings can be altered at any time. Selecting settings Touch the sensor buttons until the setting you want appears in the display. – The sensor button scrolls down the list. Calling up settings – The sensor button scrolls up the list. Touch the OK sensor button to select the setting displayed.
Settings Language The display can be set to appear in one of several different languages. Welcome tone The volume for the greeting tone can be set to one of seven different settings. The flag after the word Language acts as a guide in case a language which is not understood is set. Options The language selected is saved to memory. – (quiet) – Off – (default setting) Buzzer volume The buzzer sounds to let you know the program has finished.
Settings Unit The temperature and spin speed can be displayed in 3 different forms. Options – – (default setting) The values are displayed as words. Clear text Brightness You can set the brightness of the display, the sensor buttons, and the dimmed sensor buttons. Options – Controls the brightness of the display. °C + rpm The values are displayed as figures in the units °C and rpm.
Settings Display switch-off The display and the sensor button lighting is switched off to save energy. The Start/Stop sensor button flashes slowly. Options – On Lighting switches off after 10 minutes. – – (default setting) Lighting remains switched on throughout the program. The lighting switches off 10 minutes after the program has ended. On (not crnt prog) Off The lighting remains switched on.
Settings Long p-wash Normal If you require a longer pre-wash, you can extend the standard pre-wash time of 25 minutes. Options Gentle action With gentle action activated, drum rotation is reduced. In this way, lightly soiled items can be washed more gently. – No increase Gentle action can be activated for the Normal and the Wrinkle-free programs. – + 6 min Gentle action is switched off in the default setting.
Settings Maximum rinse level The water level in the rinse can be permanently set to the highest value. This function is important for allergy sufferers as it achieves excellent wash results. The water consumption will be increased. The function is switched off in the default setting. Suds cooling Additional water flows into the drum at the end of the main wash to cool the suds down. Suds cooling takes place when a Normal program with a temperature setting of Hot+ or higher is selected.
Settings Set up again Miele@home Control the networking of your washing machine with your WiFi network. The following points may appear in the submenu: This message only appears if the washing machine has not yet been connected to a WiFi network. Please refer to "Initial set-up" to set up the connection. Deactivate (visible if Miele@home is acti- vated) Miele@home remains set up, the WiFi function is switched off. (visible if Miele@home is deacti- vated) The WiFi function is reactivated.
Settings Remote control SmartGrid The Remote control setting is only visible if the Miele@home setting is set up and activated. The Remote control setting is only visible if the Miele@home setting is set up and activated. Once the Miele@mobile app has been installed on your mobile device, you can check the status of your washing machine from anywhere and start it remotely. You can also control it remotely via the MobileControl program.
Settings Bleach You can activate the automatic addition of chlorine bleach at the end of the main wash. Chlorine bleach may only be used in some programs. See "5. Adding detergent – Using chlorine bleach" for more detailed information. Activating chlorine bleach extends the program duration by approximately 10 minutes. The washing machine is delivered with the chlorine bleach setting deactivated.
Optional accessories Detergent Sport UltraWhite – Liquid detergent for sportswear and fleece garments – Multi-purpose powder detergent – For white and light-colored laundry as well as heavily soiled cotton items – Effective stain removal even at low temperatures UltraColor – Liquid detergent for colored items – For colored and dark textiles – Neutralizes unpleasant odors – Retains the shape of the textiles Downs – Liquid detergent suitable for pillows, sleeping bags, and Down Filled Items – Retains the
Optional accessories Fabric care Machine care Fabric care agents are available as capsules in convenient single dose amounts or in a handy bottle. Detergent Proofing agent – For reproofing microfiber textiles, e.g.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
WWF 060 en-US M.-Nr.
