User manual

Table Of Contents
Programmable functions
91
Switching off WiFi
Turn the programme selector to the
MobileStartprogramme.
appears on the time display.
Press the sensor control and hold
the sensor control until the count-
down on the time display has fin-
ished.
appears on the time display.
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be
reset whenever a washer-dryer is be-
ing disposed of or sold, or if a used
washer-dryer is being put into opera-
tion. This is the only way to ensure
that all personal data has been re-
moved and the previous owner will
no longer be able to access the
washer-dryer.
A new connection setup has to be
carried out in order to use
Miele@home again.
Copyrights and licences for the
communication module
For the purpose of operating and con-
trolling the communication module,
Miele uses proprietary or third-party
software that is not covered by open
source licensing terms. These items of
software/software components are pro-
tected by copyright. The copyrights
held by Miele and third parties must be
respected.
Furthermore, this communication mod-
ule contains software components
which are distributed under open
source licence conditions. The open
source components contained in the
appliance along with the corresponding
copyright notices, copies of the licens-
ing terms valid at the time, and any fur-
ther information can be accessed loc-
ally via IP using a web browser (http://
<IP address>/Licenses). The liability
and warranty arrangements for the
open source licences displayed in this
location only apply in relation to the re-
spective rights holders.