User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Select a programme
- 3. Load the washing machine
- 4. Select programme settings
- 5. Add detergent
- 6. Starting the programme
- 7. End of programme
- Spinning
- Programme chart
- Garment care label symbols
- Extra options
- Wash programme chart - Extras
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Adding fabric conditioner or liquid starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- Fault message after a programme has been interrupted.
- Fault message at the end of a programme
- Fault message at the end of a programme
- Messages or faults with the TwinDos system
- Messages or faults with the TwinDos system
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Consumption data
- Technical data
- Settings
- Accessing the Settings menu
- Selecting settings
- Changing a setting
- Closing the settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Consumption
- Code
- Units
- Brightness
- Disp. switch-off stat.
- Programme info
- Memory
- Long p-wash Cotton
- Soak duration
- Gentle action
- Temp. reduction
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- Copyrights and licences for the communication module
- Detergents and care products
Before using for the first time
19
Switching on the washing ma-
chine
Turn the programme selector to the
Cottons programme.
The welcome tone will sound and the
welcome screen will light up.
The display will guide you through the
5steps of the initial commissioning
process.
1. Set the language
You will be prompted to set the display
language. It is possible to change the
language at any time by setting the pro-
gramme selector to Further pro-
grammesin the Settings sub-menu.
english (GB)
OK
Touch the sensor controls until
the language you want appears in the
display.
Confirm your choice of language by
touching the OKsensor control.
2. Setting up Miele@home
The following message appears in the
display:
Miele@home
Confirm with OK.
The following message appears in the
display:
Set up now
To set up Miele@home now: touch
the OK sensor control.
To postpone setup until later: touch
the sensor control until the follow-
ing appears in the display: Set up later
and pressOK to confirm.
The following selection options appear
in the display:
1. Connect via WPS
2. Connect via App
Select the required connection type.
You will then be guided by the display
and the Miele app.