User manual

Table Of Contents
Settings
88
Disp. switch-off stat.
The display and the sensor control
lighting is switched off to save energy.
The Start/Add laundrysensor control
flashes slowly.
Selection
- On (factory default)
The lighting switches off after
10minutes.
- On (not current pr.)
The lighting remains switched on
throughout the programme. The light-
ing switches off 10minutes after the
programme has ended.
- Off
The lighting remains switched on.
Programme info
You can select the information that will
be displayed temporarily in the display
after a programme has been selected.
Selection
- Programme name
The programme name is shown in the
display for several seconds.
- Prog. & max load (factory default)
The programme name and the max-
imum load size are shown in the dis-
play for several seconds.
- Off
Directly after the programme has
been selected, the standard display
is shown with temperature, spin
speed and programme duration.
Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the extras) selected for a
programme after the programme has
started.
When the programme is chosen again,
the saved settings will appear in the
display.
Memory is deactivated as standard.
Long p-wash Cotton
If you require a longer pre-wash, you
can extend the standard pre-wash
time of 25minutes.
Selection
- No increase (factory default)
25minute pre-wash.
- + 6 min
31minute pre-wash.
- + 9 min
34minute pre-wash.
- + 12 min
37minute pre-wash.