User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Select a programme
- 3. Load the washing machine
- 4. Select programme settings
- 5. Add detergent
- 6. Starting the programme
- 7. End of programme
- Spinning
- Programme chart
- Garment care label symbols
- Extra options
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Using fabric conditioner or starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- Fault message after a programme has been interrupted.
- Fault message at the end of a programme
- Fault message at the end of a programme
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Technical data
- Consumption data
- Settings
- Accessing the Settings menu
- Selecting settings
- Changing a setting
- Closing the settings menu
- _
- Buzzer volume
- Keypad tone
- Welcome tone
- Consumption
- Code
- Units
- Brightness
- Disp. switch-off stat.
- Programme info
- Memory
- Long p-wash Cotton
- Soak duration
- Gentle action
- Temp. reduction
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- Copyrights and licences for the communication module
- Detergents and care products
Operating the washing machine
16
Display
The standard display shows the follow-
ing from left to right:
2:24
OK
40°
1400
- The selected wash temperature
- The selected spin speed
- Programme duration
Examples on how to operate
the machine
Scrolling through a list
The scroll bar in the display indicates
that a list of choices is available.
Language
OK
Scroll down the list with the sensor
control. Scroll up the list with the
sensor control. The OKsensor con-
trol is used to activate the option shown
in the display.
Identifying the selected option
Cap
OK
An activated option in a list will have a
tick next to it.
Setting numerical values
Start in
OK
h:0000
The numerical value is highlighted in
white. Touching the sensor control
decreases the value. Touching the
sensor control increases the value.
The OKsensor control is used to activ-
ate the value shown in the display.
Exiting a sub-menu
Select Back to exit a sub-menu.