Operation Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Caring for the environment
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Load the washing machine
- 3. Select a programme
- 4. Add detergent
- 5. Start the programme
- 6. End of programme - unload the drum
- Spinning
- Delay start
- Programme chart
- Extra options
- Garment care label symbols
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Water hardness levels
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Miele recommended detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Dispensing fabric conditioner and liquid starch at the end of the programme
- Cleaning and care
- Problem solving guide
- The programme does not start
- The programme is cancelled and a fault indicator light lights up in the control panel
- During the programme, a symbol appears in the time display
- At the end of the programme, an indicator light lights up in the control panel
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Consumption data
- Technical data
- Programmable functions
- Choosing and selecting a programmable function
- Editing and saving the programmable function
- Exit programming level
- Sensor tone
- Lock code
- Control panel switch-off status
- Memory
- Longer pre-wash Cottons
- Gentle action
- Reduce temperature
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Anti-crease
- Backlight brightness dimmed
- Optional accessories
Delay start
29
With Delay start you can choose when
you want the programme to start. You
can delay the start of the programme by
30minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
Select delay start
Delay start cannot be selected with
Drain/Spin or Proofing.
Select the programme required.
Touch the sensor.
The sensor lights up brightly.
Touch the or sensor repeatedly
until the required delayed start time
appears in the time display.
– For less than 10 hours, the delay start
time changes in increments of
30minutes
– For more than 10 hours, the delay
start time changes in increments of
one hour
To begin delay start
Touch the flashing Start/Stop sensor.
The delay start process starts and
counts down in the time display.
To alter delay start
Touch the Start/Stop sensor.
The delay start process stops and the
symbol lights up in the control panel.
Touch the or sensor repeatedly
until the required delayed start time
appears in the time display.
Touch the flashing Start/Stop sensor.
To cancel a delay start that has
already started
Touch the Start/Stop sensor.
The delay start process stops and the
symbol lights up in the control panel.
Touch the brightly lit sensor.
The delay start period is deleted and
the sensor switches off. The pro-
gramme duration appears in the time
display.
Touch the flashing Start/Stop sensor
in order to start the wash programme.