Operation Manual

Problem solving guide
52
General problems with the washing machine
Problem Cause and remedy
Fabric conditioner is not
completely dispensed
or too much water re-
mains in the  com-
partment.
The siphon tube is not correctly positioned or is
clogged.
 Clean the siphon, see “Cleaning and care - Clean-
ing the detergent dispenser drawer”.
At the end of the pro-
gramme there is still li-
quid in the capsule.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
 Clean the small pipe.
This is not a fault.
For technical reasons a small amount of water will re-
main in the capsule.
There is water next to
the capsule in the fabric
conditioner compart-
ment.
The Cap  sensor was not activated or an empty
capsule was not removed at the end of the last pro-
gramme.
 Make sure that you remember to activate the Cap
 sensor the next time you insert a capsule.
 Remove and then dispose of the empty capsule at
the end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
 Clean the small pipe.