Operation Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Select a programme
- 3. Select programme settings
- 4. Load the washing machine
- 5. Add detergent
- 6. Start the programme - the end of a programme
- Spinning
- Programme chart
- Extra options
- Wash programme chart - Extras
- Programme sequence
- Changing the programme sequence
- Garment care label symbols
- Favourite programmes
- Washing assistant
- Timer
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Adding fabric conditioner or liquid starch separately
- Colour run and dye removers/dyes
- Miele recommended detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- Fault message after a programme has been interrupted.
- Fault message at the end of a programme
- Fault message at the end of a programme
- Messages or faults with the TwinDos system
- Problems with TwinDos
- General problems with the washing machine
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation and connection
- Technical data
- Consumption data
- Settings
- Optional accessories
![](/manual/miele/wcr890-wps/operation-manual-english/images/img-20.png)
Before using for the first time
20
Switch on the washing ma-
chine
Press the button.
The welcome screen will light up.
The display will guide you through the
6steps of the initial commissioning
process.
1. Set the language
You will be asked to select the language
you require for the display. It is possible
to change the language at any time via
the settings menu.
english (GB)
Language
english (US)
español
français (F)
français (CA)
hrvatski
OK
Scroll to the left or the right until the
language you want appears.
Touch the sensor for the language
you want.
The selected language will be high-
lighted in orange and the display will
change to the menu for setting up
Miele@home.
2. Setting up Miele@home
Skip
Continue
Set up "Miele@home"?
To set up Miele@home now: Touch
the Continue sensor.
Tip: To postpone setup until later:
Touch the Skip sensor. The following
message will then appear in the display:
It is possible to set up later in "Settings" /
"TwinDos".
Confirm with OK.
Via WPS Via App
Which connection method do you
want to use?
Select the connection method you
wish to use.
You will then be guided by the display
and the Miele@mobile app.