Operation Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Select a programme
- 3. Select programme settings
- 4. Load the washing machine
- 5. Add detergent
- 6. Start the programme - the end of a programme
- Spinning
- Programme chart
- Extra options
- Wash programme chart - Extras
- Programme sequence
- Changing the programme sequence
- Garment care label symbols
- Favourite programmes
- Washing assistant
- Timer
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Adding fabric conditioner or liquid starch separately
- Colour run and dye removers/dyes
- Miele recommended detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- Fault message after a programme has been interrupted.
- Fault message at the end of a programme
- Fault message at the end of a programme
- Messages or faults with the TwinDos system
- Problems with TwinDos
- General problems with the washing machine
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation and connection
- Technical data
- Consumption data
- Settings
- Optional accessories
Settings
105
Controls / Display
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language
(Sprache in German) acts as a guide in
case a language which is not under-
stood has been set.
The language selected is saved.
Consumption
In this setting you can check the
saved energy and water consumption
values and enter the energy cost.
Options
– Previous programme
Shows the consumption for the last
wash programme carried out.
– Total consumption
Shows the sum of the energy and the
sum of the water used by the previ-
ous programmes.
– Set the cost
You can enter the cost for energy
(electricity) and water.
Code
The code prevents the washing ma-
chine being used without your know-
ledge.
Options
– Activate
If you activate the code, you have to
enter a code after switching the
washing machine on. Otherwise it
cannot be operated.
The factory default code is 125.
– Change
If wished, you can set a different
three-digit code.
If you forget the code, only Miele
Technical Service can unlock the
washing machine.
Make a note of your new code.
– Deactivate
The washing machine is to be oper-
ated again without entering a code.
This only appears if the code had
been activated previously.