Operation Manual

Settings
109
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your washing
machine.
The RemoteUpdate function is deactiv-
ated as standard.
If you do not install a RemoteUpdate,
you can continue to use your washing
machine in the usual way. However,
Miele recommends installing Re-
moteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be selec-
ted if you have added your washing
machine to your WLAN network (see
“Miele@home” in the “Settings”
chapter).
Miele’s RemoteUpdate function can
only be used if the washing machine is
connected to a WLAN network and you
have an account in the Miele@mobile
app. The washing machine must be re-
gistered with your account in the app.
See the Miele@mobile app for terms
and conditions of use.
Some software updates can only be
carried out by Miele Service.
Running a RemoteUpdate
If a RemoteUpdate is available for your
washing machine, it will be displayed
automatically for you.
You can choose to start the RemoteUp-
date immediately or wait until later. If
you select “Start later”, the prompt to
run the RemoteUpdate will be displayed
again the next time you switch on your
washing machine.
The RemoteUpdate can take a few
minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
a RemoteUpdate is available.
– Once a RemoteUpdate has been in-
stalled, it cannot be undone.
– Do not switch off the washing ma-
chine during a RemoteUpdate. Other-
wise, the RemoteUpdate will be
aborted and will not be installed.