Operation Manual

Locking functions
Electronic programme locking
Programme locking prevents the ma-
chine from being opened or the pro-
gramme cancelled during a wash
programme.
To activate programme locking
After the start of a programme, press
the START button for at least 4 sec-
onds until the locked check light
(lower right on the control panel)
comes on.
Programme locking is now activated.
The machine will now not accept any
changes and the programme will pro-
ceed through to the end.
Programme locking is deactivated auto-
matically at the end of the programme.
Deactivating programme locking
early
Press the START button for at least 4
seconds until the locked check light
(lower right on the control panel)
goes out.
Exception:
If the programme selector has been
moved and the Anti-crease/Finish indi-
cator light is flashing in the sequence
display.
First, turn the programme selector
back to the programme chosen pre-
viously. The Anti-crease/Finish indi-
cator light will go out.
Now press the START button for at
least 4 seconds until the locked
check light (lower right on the control
panel) goes out
Locking functions
31