Operation Manual
Table Of Contents
- Contents
- Caring for our environment 2
- Warning and Safety instructions 6
- Operating the washing machine 10
- Before using for the first time 12
- Washing environmentally and economically 13
- How to wash correctly 14
- Spinning 19
- Programme chart 20
- Programme sequence 23
- Garment care label symbols 25
- Changing the programme sequence 26
- Detergent 28
- Cleaning and care 31
- Problem solving guide 34
- After sales service 41
- Installation and connection 42
- Consumption data 53
- Technical data 54
- Programmable functions 56
- To access programmable functions 56
- To select a programmable function 56
- To alter a programmable function 56
- To come out of programmable functions 56
- Language F 56
- Water plus 57
- Gentle action 57
- Suds cooling 57
- Code 58
- Temperature unit 59
- Buzzer 59
- Keypad tone 59
- Brightness 59
- Contrast 59
- Standby display 60
- Memory 60
- Anti-crease 60
- Optional accessories 61
Electrical connection U.K.
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to install
a suitable residual current device
(RCD). Contact a qualified electrician
for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Installation and connection
52