Operation Manual
Table Of Contents
- Contents
- Caring for our environment 2
- Warning and Safety instructions 6
- Operating the washing machine 10
- Before using for the first time 12
- Washing environmentally and economically 13
- How to wash correctly 14
- Spinning 19
- Programme chart 20
- Programme sequence 23
- Garment care label symbols 25
- Changing the programme sequence 26
- Detergent 28
- Cleaning and care 31
- Problem solving guide 34
- After sales service 41
- Installation and connection 42
- Consumption data 53
- Technical data 54
- Programmable functions 56
- To access programmable functions 56
- To select a programmable function 56
- To alter a programmable function 56
- To come out of programmable functions 56
- Language F 56
- Water plus 57
- Gentle action 57
- Suds cooling 57
- Code 58
- Temperature unit 59
- Buzzer 59
- Keypad tone 59
- Brightness 59
- Contrast 59
- Standby display 60
- Memory 60
- Anti-crease 60
- Optional accessories 61
Connection to the drainage
system
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can purchased from
the Miele Spare Parts Department or
your Miele dealer.
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact the Miele Spare Parts
Department or your Miele Dealer.
Drain hose connection:
1. Direct into a sink or basin:
Please note the following:
–
Hook the hose over the edge and
secure.
–
Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
2. Connected securely to a plastic
drain pipe with a rubber nipple.
There is no need to use a non-return
valve.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
Please note:
a Adapter
b Nut
c Hose clip
d End of the hose
^ Fit adapter a to the sink drain outlet
using nut b.
^ Attach the end of the hose d to
adapter a.
^
Use a screwdriver to tighten hose
clip c up close to the nut.
Installation and connection
51