User Manual
Table Of Contents
- Contents
- Caring for the environment
- Warnings and safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a programme and starting it
- 4. Removing the laundry at the end of the programme
- Delay start/SmartStart
- Programme chart
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Service
- Installation
- Technical data
- Consumption data
- Programmable functions
- Programming
- Cottons drying levels
- Minimum iron drying levels
- Cooling temperature
- Buzzer volume
- Keypad tone
- PIN Code
- Conductivity
- Control panel standby status
- Memory
- Anti-crease
- Buzzer is active
- Airways indicator
- Backlight brightness dimmed
- factory default setting
- Network
- Copyright and licences for the communication module
Programmable functions
83
Memory
You can set the following: The
electronics will save the drying level
and any options selected for the
current drying programme. They will
also save the duration of the Warm air/
DryFresh programme. The next time
the programme is selected these
saved settings will appear in the
display.
Options
= Off (factory setting)
= On
Exception:
The Cottons programme will
remain unchanged.
Anti-crease
After the programme has finished, the
drum will continue to rotate at intervals
for a max. of 2 hours. This helps
prevent creasing if the laundry is not
removed immediately after the end of
the programme. The duration can be
shortened.
Options
= no Anti-crease
= 1 hour
= 2 hours (factory setting)
Buzzer is active
The buzzer sounds to let you know the
programme has finished. It can be
switched on or off.
The continuous tone which sounds
when there is a fault is independent of
the buzzer.
Options
= Off
= On (factory default)