Operation Manual

Hygiene disinfection
The pre-set disinfection process can
be altered in the Cleaning cloths
hygiene dis. programme. There is a
choice of 4 temperatures with
corresponding holding times.
40°C / 20 min
60°C / 20 min
70°C / 10 min (factory default setting)
85°C / 15 min
Microfibre mops
When processing microfibre mops in
the Standard, Standard plus and
Chem. therm. disinfection
programmes, the suds can be cooled
down after the main wash to 45°C by
adding cold water (Cool Down).
The machine is delivered with the No
option activated (no Cool Down).
Finish Standard
In the Standard and Standard plus
programmes, the chemical finishing
process can be activated to take
place after the wash cycles (Finishing
agent can be dispensed via the
fabric conditioner compartment or via
an external dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
Finish Disinfection
In the Thermal disinfection and
Chem. therm. disinfection
programmes, the chemical finishing
process can be activated to take
place after the wash cycles (Finishing
agent can be dispensed via the
fabric conditioner compartment or via
an external dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
Finish Cleaning cloths
In the Cleaning cloths hygiene dis.,
Cleaning cloths 60°C and Cleaning
cloths 40°C programmes, the
chemical finishing process can be
activated to take place after the wash
cycles (Finishing agent can be
dispensed via the fabric conditioner
compartment or via an external
dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
Settings/Supervisor level menu
67