Operating instructions for Washing machine W 2652 WPS To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. G M.-Nr.
Caring for our environment Disposal of the packing material Disposal of your old appliance or machine The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Electrical and electronic appliances / machines often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment.
Contents Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance or machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description of the machine . . . . . . . . . . . . . . . . . . .
Contents Electronic programme locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Fabric conditioners and liquid starch . . .
Contents Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning and safety instructions To avoid the risk of accidents and damage to the machine please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance. Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner of the machine.
Warning and safety instructions The Miele "Water protection system" protects from water damage provided the following conditions have been met: – the machine is correctly plumbed in and connected to the electricity supply. – if a fault has been identified, the machine must be examined by a competent person before further use, and repaired if necessary. Faulty components must only be replaced by genuine Miele original spare parts.
Warning and safety instructions If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. If in doubt, contact the Miele Customer Service Dept. or your Miele Dealer. Textiles which have been pretreated in solvent based cleaning agents must be thoroughly rinsed in clean water before being washed in the machine.
Description of the machine Control panel a PROGRAMME buttons with indicator lights For selecting a washing programme. b Extra options buttons with indicator lights Various Extra options can be added to the washing programmes. c PC / Optical interface This is used by service technicians to run diagnostic checks on your machine and can also be used to update programming data in the future. f Start/Stop button For starting the programme selected and cancelling a programme once it has started.
Description of the machine Display When a programme is selected, the display is used to select: – the temperature – the final spin speed – the soak time – delay start – a special programme The display shows: – the duration of the wash programme – the current time of day. – / + button For changing the values shown in the display: – decreases the value or moves the highlighting up a line. + increases the value or moves the highlighting down a line.
Before using for the first time Reminder to remove transport struts Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of water leaks during use. The washing machine has a sensor which measures the amount of laundry in the drum. This determines the amount of detergent required.
Before using for the first time Running your first programme Calibrating the load sensor to zero Your washing machine is now ready for the first programme to be run. ^ Switch the washing machine on. 15:00 Select programme ^ Press the programme button for Cottons Universal. ^ Press the Start/Stop button. ^ At the end of the programme switch the machine off. The load sensor must then be calibrated to zero as you would with bathroom scales. ^ Open the drum door.
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy usage are determined by the size of the load. – Do not exceed the amount of detergent recommended by the manufacturer on the packaging. – Use the Automatic and Quick wash programmes for small loads. – Reduce the amount of detergent for smaller loads. Use the Load/ Detergent button.
How to wash correctly Brief instructions The headings numbered A, B, C, . . . show the operating sequence and can be used as brief instructions. A Sort the laundry ^ Sort the laundry by colour and by care label. Most garments have a textile care label in the collar or side seam. Dark textiles often contain excess dye and should be washed separately several times before being included in a mixed load. Always wash whites and coloureds separately.
How to wash correctly B Switch on the washing machine The interior drum lighting will come on. C Select a programme The display will switch to show the menu for the programme selected. 60°C 1600 RPM Duration 1:36 h ^ You can alter the temperature which is highlighted with the – or + buttons. Press the OK button to confirm the temperature you want and move on to the spin speed which you can also alter if you wish.
How to wash correctly The display shows the amount of laundry loaded in the drum as a % (in 25% steps) of the maximum load permissible for the programme selected. ^ Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. ^ You can select any extras (additional options) with the EXTRAS buttons.
How to wash correctly E Add detergent The load size indicator display will be replaced with the detergent percentage display. – High water consumption (an additional rinse cycle will automatically switch in). – A burden to the environment. Detergent 75% A 40% Add slightly less than half the amount recommended . . . 50% Add half the amount recommended . . . 60% Add slightly more than half the amount recommended . . . 75% Add three quarters of the amount recommended . . .
How to wash correctly F Start the programme G Remove the laundry ^ Press the flashing Start/Stop button. Anti-crease and Finish will flash alternately in the display to indicate that the programme has finished. The estimated programme duration will appear in the display. This will count down in one minute steps. During the first 10 minutes the washing machine measures how much water is being absorbed by the laundry. The programme duration may be longer or shorter depending on this absorbency rate.
Extras You can use the EXTRAS buttons to augment the basic wash programmes. Intensive For normal to heavy soiling or where staining is visible. Pre-wash For laundry with large amounts of dirt (e.g. dust, sand). The duration of the main wash is increased. Soak Water plus For heavily soiled and stained items with protein stains (e.g. blood, fats and oils, cocoa). The machine is set at the factory so that the water level in the main wash and rinses will be increased if the Water plus EXTRA is selected.
Spinning Final spin speed Wash programme Cottons Universal To omit the final spin (Rinse hold) rpm 1600 Minimum Iron 900 Delicates 600 Cottons Hygiene 1600 Woollens 1200 Silks 400 Quick wash 1600 Automatic 900 Separate rinse 1200 Outer wear 800 Denim 900 Shirts 600 Starch 1500 Spin 1600 You can reduce the final spin speed. You cannot select a final spin speed higher than that shown in the chart above.
Delay start With delay start you can choose when you want the programme to end. The start of a programme can be delayed from 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example. The current time of day needs to have been set for delay start to work correctly. To begin delay start ^ Press the Start/Stop button. 60°C START IN: To alter delay start ^ Select the programme you want and then press the m button. ^ Press the m button.
Programme chart 876 Cottons Universal 30°C to 60°C Fabric Cottons or cotton mix fabrics, e.g. T-shirts, trousers. Notes – For heavy soiling or where staining is visible, select Intensive. – For laundry with stubborn soiling and/or soiling which has been left unwashed for some time, select Soak . – For laundry with large amounts of dirt (e.g. dust, sand), select Pre-wash. – For dark coloured fabrics use a detergent for coloured fabrics, or liquid detergent.
Programme chart Delicates cold to 60°C 4321 Fabric For delicate garments made of synthetic fibres, mixed fibres and for easy care cotton shirts and blouses. Curtains, including net curtains, specified as machine-washable by the manufacturer. Notes – For heavy soiling or where staining is visible, select Intensive. – For curtains which crease easily, reduce the spin speed or select Without spin. Extras Pre-wash or Soak, Intensive Detergent Liquid detergent for delicates. Max. load 1.
Programme chart /c Silks cold to 30°C Fabric Hand-washable fabrics with no wool content, e.g. satin, lace and silk. Notes Place socks, tights, bras etc. in a washing bag. Extra Water plus Detergent Liquid detergent for delicates. Max. load 2.0 kg 76 Quick wash cold to 40°C Fabric Small loads of lightly soiled laundry which can be washed in a Cottons Universal programme. Extra Water plus Detergent Powder detergent, detergent for coloured fabrics, liquid detergent. Max. load 2.
Programme chart Special programmes Denim cold to 40°C Fabric Denim fabrics, e.g. jeans, skirts, shirts. Notes – Wash dark garments inside out. – Denim often contains excess dye and will run during the first few washes. Wash light and dark coloured items separately. Detergent Detergent for coloured fabrics, liquid detergent, detergent for delicates Max. load 2.0 kg Outer wear cold to 40°C Fabric Outer wear made from micro-fibres such as Gore-Tex®, SYMPATEX®, WINDSTOPPER® etc.
Programme chart Important - other care symbols / Hand wash (If no temperature is specified use the lowest temperature or cold) h Do not wash apf Dry clean D Do not dry clean y Suitable for chlorine bleaching z Do not use chlorine bleach Tumble dry q At normal temperature r At low temperature s Do not tumble dry Ironing I Hot iron H Medium hot iron G Cool iron J Do not iron 26
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level No of rinses Cottons Universal d a ( 2-31) L2) L Minimum Iron d a e 2-33) L2) L Delicates e b e 3 – L Cottons Hygiene d a ( 2-3 1) Rinse and Final spin interim spin L 2) L 2) L Woollens ( c ( 2 L Silks ( d ( 2 – L Quick wash d a ( 2 L2) L 2 2) L Automatic Separate rinse d a e – – e L – L 4) L L Outer wear ( b e Denim ( a ( 3 – L Shirts ( a (
Programme sequence This washing machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary. The programme sequences outlined below are based on the basic programme with a full load. Extras which can be selected have not been taken into account. The programme sequence display shows the stage the programme has reached.
Changing the programme sequence To cancel a programme You can cancel a programme at any time after it has started. ^ Press the Start/Stop button. The suds will be pumped away and the programme is cancelled. If you want to remove the laundry: ^ Press the Door button. If you want to select a different programme: ^ Switch the washing machine off with the I-On/0-Off button. ^ Switch the machine back on again. To interrupt a programme ^ Switch the washing machine off with the I-On/0-Off button.
Changing the programme sequence Adding or removing laundry after a programme has started The door cannot be opened, if: Laundry can be added or removed after the programme has started when using the following programmes: – the water is above a certain level. – Cottons Universal – Minimum iron – Cottons Hygiene – Automatic – Quick wash – Starch ^ Press the Door button to open the drum door. ^ Add or remove items. ^ Close the drum door. The programme will continue automatically.
Electronic programme locking Programme locking prevents the machine from being opened or the programme cancelled or the temperature or spin speed being altered during a wash programme. To activate programme locking ^ Once the programme has started, press the Start/Stop button for at least 6 seconds until the following appears in the display: X Machine locked The machine will now not accept any changes and the programme will proceed through to the end.
Detergent All modern detergents produced for automatic washing machines are suitable, including liquid, compact (concentrated), tablets, liquid tablets and special application detergents. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads but note that it may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as others and may not be suitable for Quick wash programmes.
Detergent Fabric conditioners and liquid starch Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. ^ Dispense according to the amount specified on the packaging.
Cleaning and care ,Disconnect the machine from the mains electricity supply and withdraw the plug from the socket prior to cleaning the machine. ^ Clean the casing with a mild nonabrasive detergent or soap and water. Wipe dry with a soft cloth. ^ Clean the fascia panel with a damp cloth and wipe dry with a soft cloth. ^ The drum can be cleaned using a suitable proprietary stainless-steel cleaning agent following the manufacturer's instructions on the packaging.
Cleaning and care Cleaning the detergent dispenser drawer Remove detergent residues regularly. ^ Clean the siphon. ^ Pull out the detergent dispenser drawer until a resistance is felt. Press down the release catch and at the same time pull the drawer right out of the machine. ^ Clean the detergent drawer with warm water. 1. Remove the siphon from compartment §. Wash under running warm water. Clean the siphon tube in the same way. 2. Replace the siphon.
Cleaning and care Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. ^ First turn off the stopcock. ^ Unscrew the threaded union connecting the free end of the inlet hose to the stopcock. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there are frequent interruptions to the external water supply. ^ Remove the rubber seal 1 from the recess.
Problem solving guide What to do, if . . . With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. ,Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
Problem solving guide Fault messages in the display Problem q Possible cause Remedy A DRAIN FAULT – The water outlet is blocked or restricted. – The drain hose has been fixed too high. – Clean the drain filter and the drain pump. – The maximum drain height is 1 m. INLET FAULT – The water inlet is blocked or restricted. Check whether – the stopcock is opened wide enough. – the inlet hose is kinked. o WPS ACTIVATED The water protection system has reacted. Call the Service Department.
Problem solving guide Problems with the load size indicator Problem Possible cause Remedy There is no load size in There was already ^ To recalibrate the sensor to the zero setting: the display. laundry in the drum when the washing – Remove the laundry from the machine was drum. switched on. This – Switch off the washing has decalibrated machine and leave the door the sensor from the open. zero setting. – Switch on the washing machine. – Press the programme button for Cottons Universal.
Problem solving guide General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine (see "Installation"). The pump makes strange noises. This is not a fault! These noises occur at the end of a pump sequence as a normal part of the operation. The water pressure is too – Clean the filter in the Large amounts of detergent residue remain low. water inlet. in the detergent – It may be useful to dispenser drawer.
Problem solving guide An unsatisfactory wash result Problem Possible cause Liquid detergent Liquid detergents does not give the usually contain no required result. bleaching agents. They do not remove fruit, coffee and tea stains. Remedy – Use a general purpose detergent containing a bleaching agent. – Pour stain removers into compartment j of the dispenser drawer and liquid detergent into a dispenser ball. – Never put stain removers and liquid detergent together in the dispenser drawer.
Problem solving guide The drum door does not open when you press the Door button Possible cause The machine is not connected to the electricity supply and / or is not switched on. Remedy Insert the plug in the socket and switch on and / or switch the machine on with the I-On/0-Off button. The electronic programme Deactivate programme locking as described in lock has been activated. "Electronic programme locking". The electronic system lock Deactivate the system lock as described in the has been activated.
Problem solving guide Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. There is a lever behind the detergent drawer fascia panel. Blocked drain outlet If the drain outlet is blocked, up to 25 litres of water will be retained in the machine. ,Caution: if laundry has been washed at a high temperature, water draining out of the machine will still be hot.
Problem solving guide Once the flow of water ceases: ^ Remove the drain filter completely. ,Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. Opening the drum door ,Always make sure that the drum is stationary before reaching into the machine to remove laundry. Reaching into a moving drum is extremely dangerous. ^ Clean it thoroughly. ^ Pull the emergency release downwards (see illustration). The drum door will open.
Problem solving guide Changing the lamp for the drum lighting The washing machine will still operate with no lamp in place or if the lighting is faulty. ^ Remove the yellow lever from behind the detergent drawer facia panel as described previously. ^ Switch the washing machine on and open the drum door. ^ Now disconnect the washing machine from the electricity supply, see "Warning and Safety instructions". ^ Press the two prongs to separate the plastic holder 1 from the protective cover 2.
After sales service In the event of any faults which you cannot remedy yourself, please contact: – your Miele dealer or – the Miele Service Department (see back cover for contact details). When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance, both of which are shown on the data plate visible above the porthole glass when the door is open.
Installation and connection Front view a Inlet hose with "Waterproof" system h Detergent dispenser drawer b Electricity supply cable i Drum door c - f Flexible drain hose (with detachable swivel elbow) j Access to drain filter, drain pump and emergency release g Facia panel with controls k Handle recesses for moving the machine l Four height adjustable feet 47
Installation and connection Rear view a Protruding edge for holding when moving the machine b Electricity supply cable c Inlet hose with "Waterproof" system d Drainage hose e Transit bar covers f Restraining clip for: – Inlet hose – Drain hose – Electricity supply cable – Transit bars when removed 48
Installation and connection Installation surface Installing the washing machine A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. To manoeuvre the machine out of its packing case to its installation site hold it by the edge of the lid where it protrudes to the rear of the washing machine as well as by the handle recesses at the front.
Installation and connection ^ Using the spanner supplied turn the left-hand transit bar 90°, then ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar. ^ withdraw the transit bar.
Installation and connection ,The washing machine must not be moved without the transit bars in place. Store the transit bars as shown or keep them in a safe place for future use. They must be re-fitted if the machine is to be moved again (e.g.when moving house). Re-fitting the transit bars Re-fitting is carried out by reversing the procedure. ^ Fit the covers on to the two holes. Then plug the holes as shown with the caps. ^ Secure the transit bars to the back of the washing machine.
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. ^ Using the spanner supplied turn counter nut 2 in a clockwise direction. Then turn counter nut 2 together with foot 1 to unscrew. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. False values may also show in the Load and Detergent display. ^ Use a spirit level to check the machine is standing level.
Installation and connection Washer and Dryer stack The fitting of building under kits and stacking kits must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit. Building under a continuous worktop/in a kitchen run A Miele tumble dryer can be stacked with the washing machine. A "WTV" stacking kit* is necessary and can be purchased from the Miele Spare Parts Department.
Installation and connection The Miele Waterproof system The Miele Waterproof system protects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose – The inlet hose is fitted with an additional electrical safety valve which works like an automatic stopcock and is housed in the inlet hose connection box. – It is pressure tested to between 7,000 and 10,000 kPa.
Installation and connection Connection to the water supply ,The plastic casing of the safety valve contains electrical components. The Waterproof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it. The machine should be connected to a mains water supply in accordance with local and national safety regulations.
Installation and connection Maintenance and care If you intend to unscrew the Miele Waterproof system hose from the stopcock it is essential to disconnect the machine from the electricity supply first. Only use a Miele Waterproof system hose should you need a replacement. In order to protect the water inlet valve, the dirt filter in the water inlet valve connection must not be removed. Extension hose A 1.
Installation and connection Connection to the drainage system Drain hose connection: The machine drains via a drain pump with a delivery head of 1 metre*. Please note the following The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull. If required, the drain hose can be extended to a length of 5 m.
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations. The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Load Consumption data Energy Water in kWh in litres Duration Normal Intensive Cottons Hygiene/Cottons Universal 95°C 5.0 kg 1.70 42 60°C1) 5.0 kg 0.85 42 1 h 51 mins 60°C 5.0 kg 0.85 42 40°C1) 5.0 kg 0.49 42 40°C 5.0 kg 0.49 42 40°C1) 2.5 kg 0.44 49 40°C 2.5 kg 0.44 49 1 h 04 min 1 h 19 mins 1.0 kg 0.33 65 49 mins 59 mins 1.0 kg 0.24 39 36 mins – 2.0 kg 0.22 35 39 mins – 3.0 kg 0.30 - 0.60 30 - 50 59 mins 2.5 kg 0.
Technical data Height 85.0 cm Width 59.5 cm Depth 58.0 cm Depth with door open 97.5 cm Weight 94 kg Maximum floor load 1600 Newton (approx. 160 kg) Capacity 5 kg dry laundry Voltage see data plate Rated load see data plate Fuse rating see data plate Consumption data see "Consumption data" Water flow pressure minimum 100 kPa (1 bar) Water flow pressure maximum 1000 kPa (10 bar) Inlet hose length 1.60 m Drain hose length 1.50 m Connection cable length 1.
Settings menu J for changing standard settings The Settings menu is used to alter the washing machine's electronics to suit changing requirements. Settings can be altered at any time.
Settings menu J Language F To open the Settings menu A Switch on the washing machine. The main menu will appear. 15:03 You can select one of the languages displayed via the Language sub-menu. Select programme B After 5 seconds an additional line will appear in the display. Select programme SETTINGS F ... C Press the OK button. Back A LANGUAGE F ... H E Use the – and + buttons to select the setting you want and confirm your selection by pressing the OK button.
Settings menu J Time of day Y First select either a 24 hour or 12 hour clock. Then set the current time of day. To select a 24 hour or 12 hour clock C Back A Y 24 h clock 12 h clock ^ Use the – and + buttons to select the clock option setting you want and confirm your selection by pressing the OK button. The display will then switch to the time of day setting. To set the time of day 12:00 Set time of day ^ Set the hour with the – and + buttons and confirm your setting by pressing the OK button.
Settings menu J Gentle action U Activating gentle action reduces the drum action. Slightly soiled items are washed more gently. Gentle action can be activated for the Cottons Universal, Minimum iron and the Cottons Hygiene programmes. The washing machine is delivered with the Gentle action setting deactivated. A tick will appear beside the option to show that it has been set. C Back A U Off B On ^ Select the option you want and confirm your selection.
Settings menu J Lock X ^ After the last number has been entered, press the OK button. The system lock prevents your machine being used without your knowledge. When the system lock has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. Back A X Activate... No Confirm lock code ^ Confirm the code with the OK button or if you want to correct a mistake, press the – button.
Settings menu J Temperature S You can chose for the temperature to be displayed as °C / Celsius or °F / Fahrenheit. A tick will appear beside the option to show that it has been set. C Back A S °C / Celsius B °F / Fahrenheit ^ Select the option you want and confirm your selection. Buzzer O When the buzzer function has been activated, an audible tone sounds at the end of a programme or when Rinse hold is reached.
Settings menu J Keypad tones P Display brightness An audible tone sounds each time a button is pressed. There are ten different display brightness settings. The washing machine is delivered with the keypad tone switched off. The machine is delivered with the display brightness on Setting 5. A tick will appear beside the option to show that it has been set. The display brightness will change as soon as a different setting is chosen.
Settings menu J Stand-by Q To save energy, the display goes out after 10 minutes and the Start/Stop T will start flashing slowly. There are two options: On Stand-by is activated: – if a programme is not selected after the machine has been switched on. – after a programme has started. – at the end of a programme. Memory E If an Extra has been selected for a programme, or the recommended temperature or spin speed has been altered, the machine will store the changes in memory at the start of a programme.
Alteration rights reserved/0705/W 2652 M.-Nr.
