Operating and Installation Guide

Before first use
50
Before first use
Allow the appliance to stand for ap-
prox. 1hour prior to connecting it to
the power supply.
This will help prevent any malfunc-
tions.
Packaging material
 Remove all packaging material from
the inside of the appliance.
Leftover tape residue.
Always remove all packaging mate-
rial, including adhesive tape, before
switching on the appliance.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
 Clean the inside of the appliance and
the accessories.
Sticking on the SmartFresh zone la-
bels
The labels supplied for the two com-
partments in the SmartFresh zone help
you to choose the right type of food to
ensure ideal storage conditions.
Please note that the refrigeration ap-
pliance must be switched off when
sticking on the labels, as the labels will
not adhere to a cold surface. Further-
more, there should not be any dust or
grease on the surface.
 Stick the labels on as described be-
low:
– Humidity-controlled compartment
for fruit and vegetables
 Remove the label from the foil and
stick it onto the frame of the humid-
ity-controlled compartment (see
“Product description”).
– Dry compartment for food which
goes off quickly
 Remove the label from the foil and
stick it onto the frame of the dry com-
partment (see “Product description”).
Tip: If you are not satisfied with the po-
sitioning of the labels, you can easily
pull them off and stick them on again.
In addition, they can be removed with-
out leaving any residue.