Operating & Installation Instructions

Selecting additional settings
58
If the SuperFrost function is switched
on, these will be automatically switched
off whenEco Mode is selected.
 In settings mode, use the and
arrow buttons to selectEco Mode and
selectOK to confirm your selection.
 Use the and arrow buttons to
switchEco Mode On, orOff and con-
firm your selection withOK.
The change in temperature to 3°F
(-16°C) on the display is the only indica-
tion that Eco Modeis switched on.
Tip: You can also switch off the Eco
Modefunction by directly adjusting the
temperature (see “Setting the temper-
ature” in “The correct temperature”).
 Health risk caused by decom-
posing food.
The usability and quality of food may
deteriorate if the temperature re-
mains above 0°F (-18°C) for an ex-
tended period.
Only ever switch on theEco Mode
function for a limited period.
When switching to Eco Mode, check
that the food in the Freezer Zone is
already properly frozen.
Do not freeze any new food while
theEco Mode function is switched
on.
Performing a Self Test
Perform a Self Test if you are concerned
that your appliance is not working prop-
erly and want to check if it is suffering
from any problems.
 In settings mode , use the  and 
arrow buttons to select Self Test and
select OK to confirm your selection.
 Touch the sensor control  if you
wish to terminate the process.
The Self Test starts and the appliance is
checked for any faults or malfunctions.
– The message System Restarting ap-
pears in the display if the Self Test
does not discover any faults or mal-
functions.
– If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages in the dis-
play.
An alarm also sounds.
 If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the sensor control .
 Make a note of the error message(s)
displayed.
 Contact Technical Service and inform
them of the error message(s) on the
display.
 Confirm the message with OK.
System Restarting appears in the display.
The appliance briefly switches off and
then back on automatically.
Self test completed appears in the dis-
play.
 Confirm the message with OK.
The main screen appears on the display
again.