Installation instructions

Programme* Status** Setting
P0Demonstration mode and
factory default settings
S 0 Demonstration mode on
(after the hob is switched on, "d"
will appear in the front left
cooking zone display and "E"in
the front right cooking display for
a few seconds).
S1 Demonstration mode off
S 9 Factory default settings reinstated
P2Power level range S0 9 power settings
(1, 2, 3 ... to 9)
S 1 17 power settings
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat-up setting is
selected, an A will flash
alternately with the continued
cooking setting in the display.
P3Induction warning tone
when there is no pan or
the pan is unsuitable
S0 Off
S 1 Quiet
S 2 Medium
S 3 Loud
P4Keypad tone when a
sensor is touched
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P5Audible tone for the timer S 0 Off
S 1 Quiet audible tone on for 10
seconds
S2 Medium audible tone on for 10
seconds
S 3 Loud audible tone on for 10
seconds
* Programmes not shown here have no allocation.
** The factory default settings are shown in bold.
Additional functions
48