Operating and Installation instructions

Operation
32
Auto Heat-up
When Auto Heat-up has been activated,
the cooking zone turns on automatically
at the highest level and then switches
to the previously selected continued
cooking level. The heat-up time de-
pends on which continued cooking
level has been chosen (see chart).
Activating
 Tap the sensor button of the required
continued cooking level until an audi-
ble tone sounds and the sensor but-
ton starts to flash.
During the heat-up time, the set contin-
ued cooking level flashes.
With extended power levels (see “Pro-
gramming”), the power levels before
and after the intermediate power level
will flash when an intermediate power
level is selected.
When you change the continued
cooking level, you deactivate Auto
Heat-up.
Deactivating
 Tap the sensor button of the set con-
tinued cooking level.
or
 select a different power level.
Continued cook-
ing level*
Heat-up time
[min:sec]
1 1:20
1. 2:00
2 2:45
2. 3:25
3 4:05
3. 4:45
4 5:30
4. 6:10
5 6:50
5. 7:10
6 1:20
6. 2:00
7 2:45
7. 2:45
8 2:45
8. 2:45
9 –
* The continued cooking settings with a dot
after the number are only available if the
power-level range has been extended (see
“Programming”). As the higher continued
cooking settings are generally used for fry-
ing food, only a relatively short heat-up time
is needed to heat up the cookware initially.