Operating and Installation instructions

Operation
30
 Fire hazard due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.
Switching the cooktop on
 Touch the sensor button.
All sensor buttons and the “Cooktop
switched on” indicator light will light up.
If no further entry is made, the cooktop
will turn itself off after a few seconds for
safety reasons.
Switching on the cooking zone
and setting the power level
 Touch the sensor button on the rel-
evant numerical display.
All the sensor buttons will light up.
 Touch the appropriate number sensor
for the power level you want.
Switching off
 To turn off a cooking zone, press the
sensor button on the corresponding
numerical display.
 To switch off the cooktop and all the
cooking zones, touch the sensor
button.
Residual heat indicator
When a cooking zone is hot, the resid-
ual heat indicator and the  sensor but-
ton light up on the control scale after
deactivation.
The lines of the residual heat indicator
go out one after another as the cooking
zones cool down. The last bar and the 
sensor button go out together.
The residual heat indicators will flash if
there is a power cut during use or
while residual heat is still present or if
you have opened the programming
function while residual heat is still
present.
 Risk of burning or scalding due
to hot cooking zones.
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.