Operating and Installation Instructions Fridge-freezer Combination To prevent accidents and machine damage, read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5 Caring for the environment ................................................................................ 14 How to save energy............................................................................................. 15 Guide to the appliance ........................................................................................ Accessories supplied ...............................................
Contents Storing food in the refrigerator section............................................................. Various cooling zones ........................................................................................... Food which is not suitable for storage in the refrigerator section ......................... What to be aware of when shopping for food....................................................... Storing food correctly..........................................................................
Contents Cleaning the ventilation grilles............................................................................... 58 Changing the air filter ....................................................................................... 58 After cleaning ........................................................................................................ 60 Frequently asked questions ............................................................................... 61 Causes of noises .....................
IMPORTANT SAFETY INSTRUCTIONS This appliance complies with all statutory safety requirements. Please note that inappropriate use can lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for non-compliance with these instructions.
IMPORTANT SAFETY INSTRUCTIONS This appliance is intended for domestic use only for cooling and storing food and drink as well as for storing deep frozen food, freezing fresh food and for making ice. Any other usage is not supported by the manufacturer and could be dangerous. This appliance is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations or other such materials or products.
IMPORTANT SAFETY INSTRUCTIONS This appliance contains the refrigerant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is combustible, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this refrigerant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the refrigerant flowing around the system.
IMPORTANT SAFETY INSTRUCTIONS Reliable and safe operation of this appliance can only be assured if it has been connected to the mains electricity supply. If the power cord is damaged, it must be replaced by a Miele authorized technician in order to protect the user from harm. Do not connect the appliance to the electrical supply with a power bar or extension cord. These are a fire hazard and do not guarantee the required safety of the appliance.
IMPORTANT SAFETY INSTRUCTIONS Defective components should only be replaced by Miele original parts. Only with these parts can the manufacturer guarantee the safety of the appliance. Miele cannot be held liable for damage caused by a faulty connection to the fresh water supply. The ice cube maker is not intended to be used with a hot water supply line. Danger of injury! Never tamper with the movable components on the ice cube maker or the element on the ice cube maker.
IMPORTANT SAFETY INSTRUCTIONS Do not store cans or bottles containing carbonated drinks or liquids which could freeze in the freezer. The cans or bottles could explode. Danger of injury and damage to the appliance. When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour; otherwise they could burst, causing injury or damage. Never handle frozen food or the metal parts of the appliance with wet hands.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and care Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or pointed objects to – remove frost or ice, – separate frozen foods or remove ice trays.
IMPORTANT SAFETY INSTRUCTIONS Californian statement No. 65 This product contains chemicals which are known to the State of California to cause cancer, birth defects, or reproductive harm. Transport To avoid damage to the appliance, always transport it upright and in its packaging. Danger of injury and damage. The appliance is very heavy and must be transported by two people. Disposal of your old appliance Before disposing of an old appliance, first make the door latches or locks unusable.
IMPORTANT SAFETY INSTRUCTIONS Splashes of coolant can cause damage to the eyes. Be careful not to damage any part of the pipework while awaiting disposal, e.g. by – puncturing the coolant channels in the evaporator, – kinking any pipework, – scratching the surface coating. Symbol on the compressor (depending on model) This information is only relevant for recycling. In normal operation there is no risk. The oil in the compressor can be fatal if swallowed or if it penetrates the airways.
Caring for the environment Disposal of packaging material Disposal of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain valuable materials.
How to save energy Installation / Maintenance Temperature setting Normal energy consumption Increased energy consumption In a well-ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, range/oven). Near a heat source (radiator, oven). Where the ideal room temperature is approx. 68 °F (20 °C). Where the ambient room temperature is above 77 °F (25 °C). Air vents uncovered and dusted regularly.
How to save energy Normal energy consumption Use Increased energy consumption The drawers and shelves are in the original arrangement. Only open the door when necessary and for as short a time as possible. Store food in an organized way. Frequent opening of the door for long periods will cause a loss of coldness. The appliance will cool down and the compressor will run for longer periods. Take an insulated cool bag when shopping and load food in the appliance as soon as possible.
Guide to the appliance Control panel a For turning off the door or temperature alarm in the freezer section g Check/fault indicators – Temperature alarm in the freezer section b For turning the SuperCool function on and off – Ice cube maker is turned on – The SuperFreeze function is turned c For turning the refrigerator section on on and off h Sensor for selecting the temperature d Sensor for setting the temperature in in the freezer section the refrigerator section (Up for colder; Down for warmer)
Guide to the appliance 18
Guide to the appliance This drawing is for illustration purposes only.
Guide to the appliance Accessories supplied Optional accessories Egg tray A range of useful Miele accessories and care products are available for your appliance. Stainless steel maintenance Air filter The air filter behind the ventilation grille protects the cooling system from dust. Ice cube scoop The ice cube scoop can be used for conveniently removing the ice cubes from the ice cube container.
Switching on and off Before first use Packaging material Remove all packaging material from the inside of the appliance. Cleaning and care Please refer to the relevant instructions in "Cleaning and care". Touch the sensor to switch the refrigerator or freezer section on or off, so that the relevant temperature appears in the display. The appliance will start cooling. Clean the inside of the appliance and the accessories.
Switching on and off Switching the appliance off To switch the refrigerator or freezer section on or off touch the sensor until the relevant temperature display goes out in the display. If this cannot be done, the safety lock is activated. The symbol will appear in the control panel. The interior lighting goes out and cooling is turned off.
The correct temperature It is very important to set the correct temperature for storing food in the appliance. Bacteria will cause food which is not stored at the correct temperature to deteriorate rapidly. . . . in the fridge section and in the PerfectFresh zone The temperature in the appliance will rise: The temperature in the PerfectFresh zone is controlled automatically, and is maintained at 32 °F to 37 °F (0 °C to 3 °C).
The correct temperature Temperature display In normal operation the display shows the current average refrigerator temperature and the current temperature in the warmest part of the freezer. Setting the temperature for the refrigerator and freezer The temperatures for the refrigerator and the freezer are set separately using the buttons for the respective section. If the temperature in the freezer section is not within the normal temperature display range, dashes will flash in the display.
The correct temperature If, after this amount of time, the temperature is too high or too low, you will need to adjust it again. Adjusting the temperature in the PerfectFresh zone In the PerfectFresh zone the temperature is maintained between 32 °F (0 °C) and 37 °F (3 °C). However, if you would like it to be warmer or colder, e.g. when storing fish, you can adjust the temperature slightly. The preset temperature in the PerfectFresh zone is 5.
The correct temperature Temperature range The temperature can be selected within the following ranges: – from 37 °F (3 °C) to 45 °F (7 °C) in the refrigerator section. – from 7 °F (-14 °C) to -15 °F (-27 °C) in the freezer section. The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperature. If the ambient temperature is too high, the appliance may not reach the lowest temperature.
Using Automatic SuperCool and SuperFreeze SuperCool function Turning off SuperCool The SuperCool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). The SuperCool function turns off automatically after approx. 6 hours. The appliance will then continue to work at normal power. Turning on SuperCool To save energy, the SuperCool function can be switched off once food and drinks are sufficiently chilled.
Using Automatic SuperCool and SuperFreeze SuperFreeze function Turning off SuperFreeze For best results, turn on SuperFreeze before putting fresh food into the freezer. The SuperFreeze function will switch itself off automatically after approx. 30 65 hours. The quantity of fresh food placed in the freezer will determine the duration before the SuperFreeze function switches off. The SuperFreeze symbol will go out and the appliance will run at normal power again.
Selecting additional settings Certain settings on the appliance can only be selected in Settings mode. In Settings mode certain appliance functions can be selected and their settings altered.
Selecting additional settings Danger of food contamination! Any interruption to the power supply during this time will not be shown in the display and the appliance will then restart in Sabbath mode. When this is ended, the power interruption will not be indicated in the display. If there is an interruption to the power supply during Sabbath mode, check the quality of the food. Do not consume any defrosted food. Touch the on and off sensor for the freezer section to exit Settings mode.
Selecting additional settings Safety lock Touch the on and off sensor for the freezer section to exit Settings mode. The lock can be activated to prevent the appliance being switched off by mistake. Activating and deactivating the safety lock Touch the On/Off sensor for the SuperFreeze function for approx. 5 seconds. The indicator light in the right-hand side of the display will light up during this time and S will flash in the bottom (freezer section) temperature display after approx. 5 seconds.
Selecting additional settings The following lights up in the display – : The safety lock has been activated, or – : Changing the temperature unit (Celsius / Fahrenheit) The temperature can be displayed in either Fahrenheit (°F) or Celsius (°C). The factory default is Fahrenheit °F. the safety lock has now been deactivated. Touch the Super sensor again to save the setting. The symbol will appear in the control panel when the lock is activated.
Selecting additional settings The following lights up in the display: – : The temperature will now be displayed in degrees Celsius, or – : The temperature will now be displayed in degrees Fahrenheit. Touch the Super sensor again to save the setting. The temperature will now be displayed in degrees Celsius or degrees Fahrenheit. Touch the on and off sensor for the freezer section to exit Settings mode.
Selecting additional settings The last selected setting lights up in the display. By touching the sensors for setting the temperature in the freezer section you can alter the brightness of the temperature display between and . Touch the Super sensor again to save the setting. Changing the door seal heater setting If condensation builds up on the door seal for the refrigerator section doors, this can be eliminated by selecting the highest door seal heater setting ( ).
Selecting additional settings Touch one of the sensors for setting the temperature in the freezer section repeatedly until flashes in the bottom temperature display. Touch the Super sensor again to save the setting. Touch the on and off sensor for the freezer section to exit Settings mode. Touch the Super sensor again. The last selected setting lights up in the display.
Temperature and door alarm Your appliance is equipped with a warning system to ensure that temperature increases in the freezer section do not go unnoticed and also prevents energy from being wasted when a door is left open. Temperature alarm If the temperature in the freezer section becomes too warm, the bottom temperature display and the alarm symbol will flash. An alarm will also sound. The temperature the appliance is set at determines the temperature the appliance recognizes as being too warm.
Temperature and door alarm Door alarm The alarm will sound if the door or a freezer drawer is left open for more than 3 minutes. As soon as the door or drawer is closed, the alarm sound will stop. Turning the door alarm off early If the acoustic alarm disturbs you, it can be switched off. Touch the alarm sensor. The alarm will stop.
Storing food in the refrigerator section WARNING! Fire hazard! Various cooling zones Do not operate any electrical equipment inside the appliance. This can cause sparking. Due to natural air circulation there are different temperature zones in the refrigerator section. Danger of explosion. Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans).
Storing food in the refrigerator section Warmest area The warmest area in the refrigerator section is in the top section of the door. Use this for storing butter so that it remains spreadable and cheese so that it retains its flavor. Coldest area The coldest area in the refrigerator section is directly above the dividing plate of the PerfectFresh zone and against the rear wall. However, inside the PerfectFresh zone is even colder.
Storing food in the refrigerator section What to be aware of when shopping for food The freshness of food when first placed in the appliance is the most important factor in determining how long it stays fresh, and how long it can be kept in the appliance. Always observe the use-by date and the recommended storage temperature. Time out of the refrigerator should be kept to a minimum, for example, when transporting food in a hot car.
Storing food in the PerfectFresh zone Due to the optimum storage conditions in the PerfectFresh zone for fruit, vegetables, fish, meat and dairy products, food remains fresh for longer, and flavor and vitamins are retained. The optimum storage temperature for fresh food which is not sensitive to the cold is 32 °F - 37 °F (0 °C - 3 °C). This is the temperature range which is automatically maintained in the PerfectFresh zone.
Storing food in the PerfectFresh zone Using a compartment as a dry compartment Using a compartment as a humid compartment If the slide control is set to dry , air humidity is not increased. If the slide control is set to humid , air humidity is increased. The dry compartment is suitable for storing perishable foods such as: The humid compartment is particularly suitable for storing fruit and vegetables.
Storing food in the PerfectFresh zone If you are not satisfied with your stored food (for example the food wilts or becomes withered after only a short storage time), check the following: Only place fresh food in the appliance. Clean the PerfectFresh compartments before storing food in them. Very wet food should be dried off before storing it. Do not store any food in the PerfectFresh zone which is sensitive to cold (see "Food which is not suitable in the refrigerator section").
Adjusting the interior fittings (refrigerator section) Adjusting the door shelf / bottle shelf Risk of injury! Only move the bottle shelves when they are empty. Lift up the door shelf / bottle shelf and pull it forward to remove it. Place the door shelf / bottle shelf at any position again. Make sure that it is properly and secure pushed back into position.
Adjusting the interior fittings (refrigerator section) PerfectFresh zone compartments The compartments in the PerfectFresh zone are on telescopic rails, and can be removed for filling, emptying or cleaning purposes: Pull out the compartment as far as it will go. Holding the sides of the compartment at the back, lift it up and then forwards and out. Push the runners back in again to avoid damaging them.
Adjusting the interior fittings (freezer section) Freezer drawers Both freezer drawers can be used to freeze fresh food and for storage of ready-frozen food. The lower freezer drawer is used for freezing fresh food and storing frozen food. The drawer can also be used to store ice cubes.
Adjusting the interior fittings (freezer section) Removing the freezer drawer containers The hanging containers in the freezer drawers can be removed. Lift the container forwards on both sides (1) and push it back slightly to unclip it (2). Remove the container upwards. Replace the container in the reverse order.
Freezing and storing food Always observe USDA food safety guidelines. WARNING! Fire hazard! Do not operate any electrical equipment inside the appliance. This can cause sparking. If food is frozen quickly, the cells have less time to lose moisture, so they shrink less. As there is not so much moisture loss, it is easier for the food to reabsorb it during the defrosting process, and very little water collects around the defrosted food.
Freezing and storing food Tips for home freezing – Do not season fresh foods or blanched vegetables before freezing. Only season cooked food lightly before freezing, but care should be taken as the taste of some spices alters when frozen. – The following types of food are suitable for home freezing: fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, baked goods, leftovers, and most pre-cooked meals.
Freezing and storing food Tip: Freezer bags may also be sealed using home heat sealing kits. Label the package with the contents and the date of freezing.
Freezing and storing food Cooling drinks quickly To cool drinks quickly, place them in the refrigerator section, and switch on the SuperCool function. When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour; otherwise they could burst.
Making ice cubes For the automatic ice cube maker to operate it must be connected to the fresh water supply (see "Fresh water supply"). Turning on the ice cube maker Only make normal domestic quantities of ice cubes with the ice cube maker. Check whether the water shut-off valve is open. Touch the sensor for turning the ice cube maker on and off so that the indicator light for the ice cube maker lights up in the right-hand side of the display.
Making ice cubes Turning off the ice cube maker The ice cube maker can be switched off independently of the freezer section if you do not want the appliance to make any ice cubes. Touch the sensor for turning the ice cube maker on and off so that the indicator light for the ice cube maker goes out in the right-hand side of the display. If the ice cube maker is going to be switched off for a long period of time close the water shut-off valve.
Making ice cubes The water volume set can be altered within the range of to by touching the sensors for setting the temperature in the freezer section. Only change the water volume setting by one level and then observe the result. If the water volume is set too high, the ice cube tray in the ice cube maker can overflow! Touch the Super sensor again to save the setting. Touch the on and off sensor for the freezer section to exit Settings mode.
Automatic defrosting Danger of injury and damage! Freezer section Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. The appliance is equipped with a "NoFrost" system. The freezer defrosts automatically. Refrigerator section and PerfectFresh zone The refrigerator section and the PerfectFresh zone defrost automatically.
Cleaning and care Danger of electric shock! Cleaning agents Unplug the appliance or disconnect it from the power supply. To avoid damaging the surfaces of your appliance, do not use Fire hazard! – cleaning products containing soda, ammonia, acid, or chloride, Do not let water get into the electronic unit or the lighting.
Cleaning and care Preparing the appliance for cleaning Switch the appliance off. The temperature shown in the display will go out and the cooling system switches off. Unplug the appliance or trip the circuit breaker. Take any food out of the appliance and store it in a cool place. Remove the shelves/bottle shelf from the appliance door. Take out all other removable parts for cleaning. Interior and accessories Clean the appliance at least once a month.
Cleaning and care Cleaning the door seal Do not use any grease or oil on the door seal as these will cause the seal to deteriorate and become porous over time. Changing the air filter If the indicator light for the air filter lights up in the control panel, the air filter needs to be be cleaned. The door seal should be cleaned regularly with clean water and then wiped thoroughly dry with a soft cloth.
Cleaning and care Reset the indicator light for the air filter as follows: Confirm cleaning of air filter When the air filter has been cleaned the indicator light for the air filter in the display must be reset. Touch the Super sensor again. lights up in the display, the indicator light for the air filter will go out. The indicator light for the air filter has been reset. Touch the On/Off sensor for the SuperFreeze function for approx. 5 seconds.
Cleaning and care After cleaning Replace all shelves and accessories in the appliance. Reconnect to the power outlet and switch the appliance back on. Switch on the SuperFreeze function for a while so that the freezer section can cool down quickly. Switch on the Automatic SuperCool function for a while so that the refrigerator section can cool down quickly. Place food back in the appliance and close the door.
Frequently asked questions The majority of malfunctions and faults that occur during the daily routine can be put right without contacting the Service Department. The following guide will assist you to identify a malfunction or fault and rectify it yourself. If, having followed the suggestions below, you still cannot resolve the problem, please contact Miele Technical Service. To prevent unnecessary loss of temperature, it is advisable not to open the doors while waiting for the appliance to be serviced.
Frequently asked questions Problem Possible cause and solution The compressor is switching on more frequently and for longer periods of time; the temperature in the appliance is too low. The ventilation grille in the appliance plinth is obstructed or too dusty. Do not block the ventilation grille. Clean the ventilation grille on a regular basis. The doors or freezer drawers have been opened too frequently, or a large amount of fresh food has been put in and/or frozen at once.
Frequently asked questions Problem Possible cause and solution Water is collecting on the door seal on the refrigeration section doors. The combination of high air humidity and low ambient temperature can result in condensation forming on the door seals. Ensure lower humidity or a higher temperature in the room. Increase the setting for the door seal heater (see "Selecting additional settings").
Frequently asked questions Problem Possible cause and solution The compressor runs continuously. This is not a fault. To save energy, the compressor runs at a lower speed, but for longer, when less cooling is required. In this way, the running time of the compressor is extended. The compressor comes on less and less often and for shorter periods of time. The temperature in the appliance rises. This is not a fault. The set temperature is too high. Correct the temperature setting.
Frequently asked questions Messages in the display Message Possible cause and solution The power failure symbol , appears in the control panel and dashes are lit up in the bottom temperature display. The temperature in the appliance in the previous days or hours has risen too high because of a power cut or interruption to the power supply. The appliance will go back to the last temperature setting when the power is back on. Touch the Alarm sensor.
Frequently asked questions Message Possible cause and solution The freezer section The temperature in the freezer section is too high. temperature display and For instance, this could be due to: the Alarm symbol – the freezer drawers being opened too often, flash. An alarm also sounds. – a large quantity of fresh food has been placed in the freezer at once without turning on the SuperFreeze function, – a lengthy interruption to the power supply. Rectify the cause of the alarm.
Frequently asked questions Messages in the display Message Possible cause and solution Dashes are flashing in Only temperatures within the range of the appliance the temperature display. temperature will be displayed. Check the temperature in the display about 6 hours after switching the appliance on. "F0 to F5" appears in the display. There is a fault. Contact Miele Technical Service. is lit up in the display The safety lock has been activated.
Frequently asked questions Problems with the ice cube maker Problem Possible cause and solution You cannot turn the ice cube maker on. The appliance is not connected to the power supply or is not switched on. Reconnect to the power supply and switch the appliance back on. The ice cube maker does not produce any ice cubes. The appliance or the ice cube maker is not turned on. Turn on the appliance and the ice cube maker. The water intake is not open or has not been vented. Open the water intake.
Frequently asked questions Problems with the ice cube maker Problem Possible cause and solution The ice cube maker is producing only small ice cubes. There are a number of plumbed-in household appliances in operation which has reduced the intake volume. Avoid using the dishwasher, washing machine, etc. at the same time. The size of the ice cubes depends on the quantity of water being taken in. You are able to set this quantity according to your wishes.
Frequently asked questions Problems with the ice cube maker Problem Possible cause and solution Water is flowing out of the appliance. The water intake is faulty. Close the water shut-off valve immediately! Check whether the water line is damaged. Check whether the water pressure is too high. Contact Miele Technical Service. Unduly high water pressure can cause leakages. The water pressure must be between 22 and 87 psi (1.5 and 6 bar).
Frequently asked questions The interior lighting is not working. Problem Possible cause and solution The interior lighting is not working. The appliance has not been switched on. Switch the appliance on. To avoid overheating, the lighting turns itself off automatically after approx. 15 minutes if the door is left open. If this is not the case, then there is a fault. Danger of electric shock. There are live electrical components under the lighting cover.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. Click... Clicking sounds occur whenever the thermostat switches the motor on or off. Sssrrrrr... On multi-zone or frost-free appliances you can sometimes just hear the sound of the fan inside the appliance. Crack...
Technical Service Technical service Warranty In the event of a fault which you cannot easily correct yourself, please contact: For additional information, please refer to your warranty booklet. – your Miele dealer or – Miele Technical Service. See the end of these operating and installation instructions for this telephone number. Contact details can be found in the back of these operating and installation instructions. Please quote the model and serial number of your appliance when contacting Miele.
Plumbing Information on the fresh water connection The appliance is only suitable for connection to a cold water supply, which The appliance must be connected to the mains water supply by a qualified professional. – is directly connected to the water supply in order to ensure a circulation of the water in the cold water line. Disconnect the appliance from the power supply before connecting it to the mains water supply. Avoid using a water line in which the water is allowed to pool.
Plumbing Connecting the water supply Before connecting the water, make sure that the appliance is disconnected from the electricity supply. The cold water line must be vented by a qualified plumber before it is used for the first time. The water connection is located at the bottom on the front of the appliance. The connection parts included with the appliance permit the connection of various water lines (water line not supplied).
Plumbing Insert the water filter with the depression facing downwards towards the adapter . Risk of damage! Do not overtighten the union nut as this can cause damage. Connect the union nut to the solenoid valve and tighten it. If you want to move the water line by 90°, screw on the elbow . For water lines with a 1/4" thread: Connect the water line (e.g. copper) to the adapter or elbow using the clamping ring and nut .
Plumbing The position of the solenoid valve as shown in this diagram may differ from your appliance. Now connect the water line to the solenoid valve. Slowly open the shut-off valve in the water supply line and check the whole water system for leaks. The appliance can now be connected to the power supply (see "Electrical connection"). Take care not to bend or damage the water line when pushing the appliance into the niche.
Electrical connection Danger of electric shock! The appliance must only be switched on when it has been installed in accordance with the installation instructions. Ground the appliance. The appliance must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit. Do not use an extension lead or multi-socket adapter.
Electrical connection The outlet must be easily accessible in an emergency so that the appliance can be quickly disconnected from the electrical supply in case of an emergency. The socket must be located so that the upper edge is a maximum 82" (2100 mm) distance from the upper edge of the base of the kitchen cabinet. If the outlet is no longer accessible once the appliance has been installed, an all-pole disconnect device with a contact opening of at least 1/8" (3 mm) must be present on site.
Installation information WARNING! This appliance must To avoid a build-up of condensa- be built in, otherwise it could tip up. Install the appliance in accordance with the installation instructions. tion and the damage this can cause, refrigerators and freezers should not generally be installed side by side with other such appliances. Do not install this appliance beside another refrigerator or freezer. Installation location This appliance should be installed in a dry, well-ventilated room.
Installation information Climate class Ventilation The appliance is designed for use within a certain climate range (ambient temperatures) and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance.
Installation information Use only the plinth panel with the ventilation slits as supplied for this appliance! 82
Installation and appliance dimensions Installation dimensions If the appliance is to fit in a niche, check that the unit has the correct dimensions for the niche before installation. 80" (2032 mm) 24" (610 mm)* 36" (915 mm) * This value applies to "frameless" installation (see "Installation and appliance dimensions – Frameless installation"). The thickness of the cabinet door must be added on for "flush" installation.
Installation and appliance dimensions Appliance dimensions KFNF 9955 iDE 84 A B C D E F G 3" (76 mm) 79 13/16" (2027 mm) 35 13/16" (910 mm) 3" (76 mm) 24" (610 mm) 42 7/16" (1078 mm) 37 1/8" (943 mm)
Installation and appliance dimensions Opening angle of the appliance doors When choosing a location for your appliance, please consider the space required for opening both appliance doors. Neither the fitted cabinet door nor the handle have been taken into account with the dimensions shown here.
Installation and appliance dimensions Flush installation To avoid a collision of the appliance doors with adjacent furniture, please note the following: Thickness of the cabinet door Opening angle of the appliance doors 5/8" (16 mm) No limitation required 3/4" (19 mm) Recommended limitation to 95° * * Use the door opening angle limiter pins supplied (see "Limiting the opening angle of the appliance door").
Installation and appliance dimensions Limiting the opening angle of the doors The door hinges are set to enable the appliance doors to be opened wide. However, if the opening angle of the doors needs to be limited for any reason, the hinge can be adjusted to accommodate this. If, for example, the appliance doors hit an adjacent wall when it is opened the, you should limit the opening angle of the appliance doors to 95°. Insert the pins supplied into the hinges from above.
Installation and appliance dimensions Repositioning electrical cabling and the pipework for the fresh water supply Electrical connection Position of power cord exit on back of appliance. Please note when repositioning the electrical connection that the length of the power cord is 90" (2280 mm). Do not connect the appliance to the electricity supply by an extension cord. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating).
Installation and appliance dimensions Plumbing For a 24" (610 mm) deep building-in niche the opening for the water line must be in the position as shown in the diagram. The water line must be at least 31 1/2" (800 mm) long for this. For niches deeper than 24" (610 mm) there is sufficient room for repositioning the water line, so the position given does not have to be maintained. Make sure that the shut-off valve is still accessible after the appliance has been installed.
Installation and appliance dimensions Dimensions and weight of cabinet doors A stainless steel front panel for this appliance is available from specialist retail outlets or from Miele Service. Please note, however, that a stainless steel front panel is only available for flush installation (see "Flush installation"). Flush installation With this type of installation the cabinet door is flush with the walls of the niche. This is the most common type of installation.
Installation and appliance dimensions Frameless installation With this installation type the cabinet doors are a little wider and taller, so that the gaps between the cabinet doors of the appliance and adjacent furniture are slightly covered. For "Frameless installation" please observe a distance of at least 1/4" (6 mm) to adjacent furniture.
Building in the appliance Two people are required to install the appliance. Before installing the appliance Install the appliance in a stable, solid housing unit, positioned on an even and level floor. Before installation, remove the bag of installation and other accessories from the appliance and remove the profile strip from the outer appliance door. Secure the cabinetry against tipping. Remove the cord clips from the back of the appliance.
Building in the appliance Load-bearing capacity of the niche floor The floor of the space where the appliance is to be installed must be flat and level. It must be made of strong, rigid material. The appliance is extremely heavy when fully loaded, and that the floor it stands on must be able to bear its weight. If necessary, seek the advice of an architect or structural engineer. Checking the installation space Check the installation dimensions.
Building in the appliance Fitting the anti-tip device on a concrete floor. Drill three holes in the floor to match the holes on the anti-tip device. The drill holes must have a diameter of 3/8" (10 mm) and be a little deeper than the length of the concrete bolts supplied. Now secure the anti-tip device to the wall with the three screws (1/4" x 2-1/8" / 6 x 54 mm). Fitting the anti-tip device on a wooden floor Place or screw the washers and hexagonal nuts onto each of the concrete dowels.
Building in the appliance Fitting the anti-tip device in a building-in niche deeper than 24" (610 mm) The guarantee that the compressor plate hooks into the anti-tip device in a deeper building-in niche, a wooden beam must be secured to bridge the gap between the back of the appliance and the wall. For sideways sloping floors Make sure that the anti-tip device is secured horizontally even with a sloping floor. Place spacers underneath if necessary.
Building in the appliance Securing the covers Pushing the appliance into the niche Caution! Risk of damage! Push the appliance into the niche, taking care not to damage the power cord and water connections. Stick the cover strips supplied onto both sides of the appliance. The cover strips protect the appliance from damage when it is being pushed into the niche. Now prepare the water connection for the appliance (see "Water connection").
Building in the appliance Aligning the appliance Aligning the freezer drawer fronts The freezer drawer fronts can be aligned if necessary. Align the appliance at the front via adjustable feet using the spanner supplied, so that it stands upright. Also align the appliance at the back by moving adjusting rods with a screwdriver or with the hexagonal key supplied, until it is standing straight. Caution! Risk of tipping over.
Building in the appliance Securing the appliance in the niche Remove the fixing bracket Remove the covers from the hinges on both sides. Secure the appliance into the cabinet with two screws each, top and bottom, above the hinge of both of the refrigerator section doors. Remove the fixing bracket covers from both refrigerator section doors, then screw them to both brackets . Place the nuts on one side as these will be required for securing the refrigerator section cabinet doors.
Building in the appliance Fixing the fixing brackets to the cabinet doors Lay the fixing brackets on the inside of the cabinet doors. Align the brackets centrally and on the lines you have drawn. Secure each bracket to the cabinet doors for the refrigerator section with at least six screws 3/16" x 5/8" ( 4 x 16 mm). Lightly draw thin lines with a pencil on the inside of the cabinet doors for the refrigerator section doors, as shown in the diagram.
Building in the appliance Securing the cabinet fronts to the freezer drawers Securing the cabinet door to the refrigerator door The following is only an instruction for fitting one cabinet door. Repeat the fitting instructions for the second cabinet door. Pull out each drawer and secure the cabinet front on both sides with the screws 1/8" x 1/2" (3.5 x 13 mm). These are the same screws that were previously used to attach the fixing bracket.
Building in the appliance Draw a line along the lower edge of the fixing bracket. Take the cabinet door off the refrigerator door. Loosen the washers again and adjust the bolts to align the cabinet door vertically with adjacent furniture. Remove the lower bracket from the refrigerator door. Then the door closing damper must be removed in order to prepare the fitting at the bottom of the cabinet door.
Building in the appliance Screw the nuts onto the adjusting bolts but do not tighten them yet. Secure the cabinet door at the bottom with the same screws that were previously used to attach the lower bracket to the refrigerator door. Pull the soft-close mechanism so that it extends and hook it onto the ball joint again. Align the cabinet door flush with the exterior. Now tighten the nuts on the adjustment bolts.
Building in the appliance Fitting the air filter and ventilation grille Pull out the lower freezer drawer completely. Carefully remove the protective foil from the air filter supplied. Put the cover back into place. Take care not to trap any cords located at the sides. Check the refrigerator section doors and adjust them if necessary using the screws in the hinges. Insert the air filter into the bottom left of the appliance plinth, press the tab downwards and click it into place.
Building in the appliance If the ventilation slits are not kept free and unobstructed the compressor will switch on more often and will run for longer. This can cause higher energy consumption and to an increased compressor operating temperature, which can result in damage to the compressor. Use only the grille with the ventilation slits as supplied for this appliance! Keep the ventilation slits clear and unobstructed at all times. They must also be regularly cleaned of dust.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
KFNF 9955 iDE en-US M.-Nr.
