36” Bottom Mount French Door Refrigerator KFNF 9955 iDE 8mieleusa.
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE SPECIFICATIONS KFNF 9955 iDE — Item 38995500USA Overall Unit Width 3513/16” (910mm) Overall Unit Height 7913/16” (2027mm) Overall Unit Depth 24” (610mm) Niche Cabinet Opening Width 36” (915mm) Minimum Cabinet Opening Height 80“ (2032mm) Minimum Cabinet Opening Depth ≥ 24” (610mm) Interior Volume Fresh Food Volume 12.9 cu-ft (365 L) Freezer Volume 6.
6” Bottom Mount French Door Refrigerator KFNF 9955 iDE Unit Dimension KFNF 9955 iDE Page 3 of 9 Specification Sheet TRS 07312017
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE Niche, Water Line, and Electrical Dimensions Important Notes: • Do not install shut-off valve behind the appliance. • For 24” (610 mm) deep cabinets, the water line opening must be in the location shown above. • Cabinets deeper than 24” (610 mm), there are no requirements for location of water line.
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE Panel Details For Inset Installation KFNF 9955 iDE Page 5 of 9 Specification Sheet TRS 07312017
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE Panel Details For Frameless Installation KFNF 9955 iDE Page 6 of 9 Specification Sheet TRS 07312017
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE Stainless Steel Panel Details PART NUMBERS Stainless Steel Panels Item # Cooling Compartment 38996128USA Freezer Compartment 38996129USA KFNF 9955 iDE Page 7 of 9 Specification Sheet TRS 07312017
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE Door Swing Details Important Notes: • Please allow for door swing clearance at locations next to a wall • The illustrated measurement is without mounted front panels nor handles. Be sure to add your panel thickness and handle depth to the measurement in order to avoid interferences.
36” Bottom Mount French Door Refrigerator KFNF 9955 iDE ADJUSTABLE DOOR HINGE 95o or 120o Opening The door hinges are factory set so that the door can be opned wide. However if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommadate this. Insert the limit pins provided into the hinges from above. This will limit the opening angle of the applinace door to 95 o.