Operating and Installation Instructions Fridge-freezer Combination To prevent accidents and machine damage, read these instructions before installation or use. en-US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 6 Caring for the environment .............................................................................. 16 Installation.......................................................................................................... Installation location ............................................................................................. Climate class ..................................................
Contents Before first use .................................................................................................. Choosing the right Door Assistant (Push2Open/Pull2Open) ........................ Inserting the Active AirClean filters ................................................................ Miele@home ................................................................................................... Operating the refrigeration appliance.......................................................
Contents Storing food in the refrigerator section........................................................... Different storage zones ....................................................................................... Food which is not suitable for storage in the fridge zone ................................... Notes on buying food.......................................................................................... Storing food correctly................................................................
Contents Appliance warranty and product registration ...................................................... 124 Declaration of conformity ................................................................................. 125 Copyrights and licenses ...................................................................................
IMPORTANT SAFETY INSTRUCTIONS This refrigeration appliance complies with current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please read the operating and installation instructions carefully before using the refrigeration appliance for the first time. They contain important information on safety, installation, use, and maintenance. This is to protect yourself from injury, and from damaging your refrigeration appliance.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This appliance is intended for use in domestic households and similar residential environments such as – staff kitchen areas in shops, offices and other working environments – farm houses and by clients in hotels, motels and other residential type environments – bed and breakfast type environments – catering and similar non-retail applications. This appliance is not intended for use outdoors, in damp environments or in places exposed to rain.
IMPORTANT SAFETY INSTRUCTIONS Safety with children To reduce the risk of injury, do not allow children to play in, on or near the appliance. Risk of death. Please bear in mind that by removing the dividing panel in the large freezer basket, children may be tempted to climb inside. The door hinges can cause injury. Keep children well away at all times. Ensure that any packing material is disposed of safely and kept out of the reach of children.
IMPORTANT SAFETY INSTRUCTIONS Technical safety The coolant circuit has been checked for leaks. The refrigeration appliance complies with statutory and regulatory requirements. This refrigeration appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is combustible, it does not damage the ozone layer and does not contribute to the greenhouse effect. The use of this coolant has, however, led to a slight increase in the noise level of the appliance.
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the appliance, make sure that the connection data (fuse rating, frequency and voltage) on the data plate corresponds to the household supply. Check that this is the case before connecting the appliance. Consult a qualified electrician if in any doubt. The electrical safety of the appliance can only be guaranteed when correctly grounded. It is essential that this standard safety requirement is met.
IMPORTANT SAFETY INSTRUCTIONS For safety reasons, this appliance may only be used after it has been built in. The machine must be disconnected from the power supply during installation, maintenance, and repair work, and installation work on the fresh water connection. The machine is only completely isolated from the power supply when: - the fuses have been switched off, or - the circuit breaker has been removed completely, or - the power cord has been unplugged.
IMPORTANT SAFETY INSTRUCTIONS Correct use The refrigeration appliance is designed for use within a specific climate class (room temperature range). Do not use in a climate class for which it is not designed. A lower room temperature will cause the compressor to switch off for longer periods, meaning that the refrigeration appliance is unable to maintain the required temperature. WARNING! DANGER of overheating! Do not cover or block the air vents.
IMPORTANT SAFETY INSTRUCTIONS Risk of injury. Do not take ice cubes out with your bare hands and never place ice cubes or ice pops in your mouth straight from the freezer section. The very low temperature of the frozen food can cause frost burn to the lips and tongue. Do not refreeze partially or fully defrosted food. Consume defrosted food as soon as possible, as it will lose its nutritional value and spoil if left for too long. Defrosted food may only be refrozen after it has been cooked.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or pointed objects to - remove frost or ice, - separate frozen foods or remove ice trays.
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance Children could become trapped in the machine and could suffocate. - Remove the machine doors. - Remove the drawers. - Leave the adjustable shelves in the machine so children cannot climb inside. DANGER of electric shock! - Cut the plug off the power cord. - Cut the power cord off the old appliance. Dispose of them separately from the appliance.
Caring for the environment Disposal of packaging material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Return the packaging to your dealer.
*INSTALLATION* Installation Installation location This appliance should be installed in a dry, well-ventilated room. When deciding where to install your refrigeration appliance, please bear in mind that it will use more energy if installed near to a heater, a range, or another appliance that gives off heat. Direct sunlight should also be avoided. The higher the room temperature, the longer the compressor runs and the higher the energy consumption of the refrigeration appliance.
*INSTALLATION* Installation Risk of damage due to high humidity. In environments with high humidity, condensation can build up on external refrigeration appliance panels, which can cause corrosion. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
*INSTALLATION* Installation Load-bearing capacity of the niche floor To ensure the safe installation of the refrigeration appliance and to guarantee its correct functioning, the floor of the niche where the appliance is to be installed must be smooth and even. It must be made from strong, rigid material. Because the refrigeration appliance is extremely heavy when fully loaded, it is essential that the floor it stands on is able to bear its weight.
*INSTALLATION* Installation Side-by-side This appliance can be installed side-byside with another refrigeration appliance. The following overview will show you which side-by-side options you have with your appliance: A side-by-side merging kit and a top frame (KTF) are required for this. Both are available from your Miele dealer or Miele Service. Instructions for installing appliances side-by-side can be found in the sideby-side merging kit instruction manual. . . .
*INSTALLATION* Installation . . . without partition wall Specifications for the plumbed water connection - Connection to the water supply must comply with the applicable regulations in the country where the appliance is being installed. All appliances and systems used to supply water to the refrigeration appliance must also comply with the applicable regulations in the respective country.
*INSTALLATION* Installation Installation dimensions Position of the electrical and plumbed water connections - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. - The 1/4" (6 mm) plumbed water connection should not be positioned higher than 2" (50 mm) above the floor. The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency.
*INSTALLATION* Installation C D A B A B C D KF 2802 SF, 84"–85 3/16" KF 2812 SF (2134–2164 mm) 30" (762 mm) 24" (610 mm) 3/4" (19 mm) KF 2902 SF, 84"–85 3/16" KF 2912 SF (2134–2164 mm) 36" (915 mm) 24" (610 mm) 3/4" (19 mm) 23
*INSTALLATION* Installation 1 3/16" (30 mm) 9 5/8" (244 mm) 3 3/8" (85 mm) Side view 24 7/8" (22 mm) 4" (102 mm) 4" (102 mm)
*INSTALLATION* Installation Dimensions with appliance door open (opening angle 90°/115°) 3/8" (10 mm) D A B C A B C D KF 2802 SF, KF 2812 SF 32 5/8" (829 mm) Cabinet front Door handle 14 5/16" (363 mm) KF 2902 SF, KF 2912 SF 38 11/16" (982 mm) Cabinet front Door handle 16 7/8" (428 mm) 25
*INSTALLATION* Installation Building in the appliance Before starting... It is essential to read these installation instructions carefully before starting to install the appliance. The appliance should be installed by a suitably qualified tradesman in accordance with these installation instructions. Safe operation of the appliance is only assured if it has been installed and connected in accordance with the installation instructions.
*INSTALLATION* Installation Aligning the installation niche Checking the installation niche Check the installation dimensions (see “Installation – Installation dimensions”). Check the position of the electrical connection. The length of the power cord is 9' 10" (3 m). The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency. Check the position of the plumbed water connection.
*INSTALLATION* Installation Before installation Before installation, remove any accessories from the back of the appliance. Check the refrigeration appliance for damage during transportation. Do not install a damaged appliance. Check that all parts at the back of the appliance are unhindered. To protect the floor during installation, secure an off-cut of flooring or similar material to the floor in front of the installation area.
*INSTALLATION* Installation Preparing the installation niche Risk of damage and injury due to the refrigeration appliance tipping over. This refrigeration appliance is very heavy and can tip forwards when the doors are open. The installation niche must be secured to the wall behind it and/or above it with several screws. Only this will prevent the refrigeration appliance from tipping over after being installed. In addition, use the provided anti-tip brackets to secure the installation niche.
*INSTALLATION* Installation Risk of damage and injury due to the refrigeration appliance tipping over. If the anti-tip brackets are fixed too high up, they cannot be used to secure the refrigeration appliance. The distance between the anti-tip brackets and the refrigeration appliance must not exceed 5/16" (8 mm). Retaining screws for different uses and types of material are supplied in the accompanying pack.
*INSTALLATION* Installation Pushing the appliance into the niche 2 Push the appliance into the niche, taking care not to damage the power cord and plumbed water connections. If you are installing several refrigeration appliances side by side, now secure the appliances to one another (see the installation instructions for the side-by-side installation kit). Securing with a wooden wedge Secure the installation niche to the wall behind it and/or above it as required using the anti-tip brackets .
*INSTALLATION* Installation 5 Affix edge protection to the adjacent cabinet fronts. Insert the plug connector at the back of the refrigeration appliance (see “Installation – Electrical connection”). Insert the plug into the electrical socket. The electrical socket must be close to the refrigeration appliance and easily accessible. Risk of damage due to electrical overload.
*INSTALLATION* Installation Aligning the refrigeration appliance Align the appliance with neighboring cabinet fronts as described below. The adjustable feet at the front and back of the appliance can all be adjusted from the front of the appliance. Risk of damage due to incorrect feet adjustment. You may damage the adjustable feet if you use a cordless screwdriver. Always adjust the front and rear feet by hand.
*INSTALLATION* Installation Adjust the rear feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver . Adjust the front feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver . Tip: Proceed carefully when adjusting the feet, alternating between the left and right feet. Unscrew the adjustable feet and on both sides at least until the marking on the toe-kick is aligned with the required 1 1/4" (32 mm) on the spacer .
*INSTALLATION* Installation Risk of damage if the feet are Securing the appliance in the niche adjusted too much. The rear adjustable feet can be damaged. Unscrew the feet only until the marking on the toe-kick is aligned to a maximum of 2 7/16" (62 mm) (max. niche height of 85 3/16" (2,164 mm)). Use the screws supplied to secure the refrigeration appliance on both sides. Use a level to check the alignment of the appliance.
*INSTALLATION* Installation Slide the cover onto the lower appliance door from the inside. Securing the toe-kick board and cover Remove the film from the adhesive strips on the toe-kick cover provided . Secure the toe-kick cover to the toe-kick board . 36 Click the toe-kick board onto the bottom of the appliance toe-kick.
*INSTALLATION* Installation Aligning the appliance doors After installation, align the appliance doors with adjacent cabinet fronts. To do this, check the gaps to the adjacent cabinet fronts. Remove the covers from both sides of the top and bottom appliance door. If necessary, use the spacers provided and place them at the top of the appliance doors on both sides. Slightly loosen the screws in the angle trims on both sides of the top and bottom appliance door.
*INSTALLATION* Installation Remove the cover from the light contact switch of the top appliance door. Align the height and sides of the appliance doors using the threaded bolts . Remove the nuts and washers from the threaded bolts of the top and bottom appliance door. If necessary, also align the depth of the appliance doors via the gaps in the angle trims.
*INSTALLATION* Installation Close the appliance doors and check the distance between the door and adjacent cabinetry fronts again. Then re-tighten all screws and . Place the washers and nuts back on the threaded bolts and tighten the nuts. The appliance doors are now secured. Reattach covers and . Place the covers provided on the fixing brackets. Remove the spacers from the appliance door.
*INSTALLATION* Installation Limiting the opening angle of the appliance door The door hinges are set ex works to enable the appliance door to be opened wide. If, for example, the appliance door hits an adjacent wall when it is opened, you should limit the opening angle of the appliance door to 90°: Open the appliance door. Insert the pin into the lower hinge from above. This will limit the opening angle of the appliance door to 90°.
*INSTALLATION* Installation Water connection Information on the fresh water connection Risk of injury and appliance damage if appliance is not connected properly. Failing to connect the appliance properly can result in personal injury and/or material damage. The appliance may only be connected to the fresh water connection by qualified technicians. Disconnect the refrigeration appliance from the power supply before connecting it to the water supply.
*INSTALLATION* Installation Unduly high water pressure in the system can result in damage to the appliance. Install a pressure reducing valve if the water pressure in the system exceeds 116 psi (8 bar). Do not install the system if the water pressure exceeds 120 psi (8.3 bar). Contact your plumbing specialist if you are unsure of your water pressure.
*INSTALLATION* Installation Electrical connection Risk of electric shock! The appliance must only be switched on when it has been installed in accordance with the installation instructions. Ground the appliance. The appliance must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit.
*INSTALLATION* Installation If the outlet is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole disconnect device with a contact opening of at least 1/8" (3 mm). These can be circuit breakers, fuses, and relays. Connecting the appliance The plug and power cord must not come into contact with the back of the appliance as vibrations can cause damage to these components.
Saving energy Installation / Maintenance Temperature setting Normal energy consumption Increased energy consumption In a well-ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, range/oven). Near a heat source (radiator, oven). Where the ideal room temperature is approx. 68°F (20°C). Where the ambient room temperature is above 77°F (25°C). Air vents uncovered and dusted regularly.
Saving energy Normal energy consumption Use Increased energy consumption The drawers, and shelves are arranged as they were when the appliance was delivered. Only open the door when necessary and for as short a time as possible. Store food in an organized way. Frequent opening of the door for long periods will cause a loss of coldness. The appliance will try to cool down and the compressor will run for longer periods.
Guide to the appliance a Automatic door opening (Push2open/Pull2open) b Display c On/Off switch d Shelves e Holder for the Active AirClean filter 47
Guide to the appliance f Interior lighting g Hanging drawer for storing small food items h Door shelves in the appliance door i Humidity-controlled compartment with moisture regulator for fruit and vegetables j Dry compartment with low temperature for food which goes off quickly k Ice maker l Freezer baskets m Ice-cube container n Water filter The dry compartment in the MasterFresh zone fulfills the requirements of a cold storage compartment according to EN ISO 15502.
Guide to the appliance Main screen 1 2 3 39°F 0 °F 4 5 6 7 a Automatic SuperCool display (only visible when the Automatic SuperCool function has been switched on) b Temperature display (target temperature) for the refrigerator section c Sensor control for setting the temperature d Display for Miele@home connection status (only visible when the Miele@home function has been set up) e SuperFrost display (only visible when the SuperFrost function has been switched on) f Temperature dis
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Function Language Set Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright) Buzzer Tones Adjust the volume or switch off the Buzzer Tones completely (e.g.
Guide to the appliance Vacation Switch on or off (see “Selecting additional settings”) Dispenser Unit Switching the ice maker on and off (see “Making ice cubes”) Sabbath Mode Switch on or off (see “Selecting additional settings”) Water Filter Display Switch on or off or reset (see “Selecting additional settings”) Display Active Air- Switch on or off or reset (see “Selecting additional settings”) Clean Filter Symbols in settings mode / Scroll in settings mode or select a settin
Accessories Accessories supplied Optional accessories Appliance plug A range of useful Miele accessories and care products are available for your appliance. Active AirClean filters The Active AirClean filters neutralize unpleasant odors in the refrigerator section and stop odors from being transferred to the food. Insert the supplied Active AirClean filters as described under “Cleaning and care – Replacing the Active AirClean filters”. We recommend replacing the Active AirClean filters every 6 months.
Accessories Accessories are available to order via the Miele Webstore, from Miele directly (see back cover for contact details) or from your Miele dealer.
Before first use Before first use Allow the appliance to stand for approx. 1 hour prior to connecting it to the power supply. This will help prevent any malfunctions. Cleaning Please refer to the relevant instructions in “Cleaning and care”. Clean the inside of the appliance and the accessories. Packaging material Choosing the right Door Assistant (Push2Open/Pull2Open) Remove all packaging material from the inside of the appliance. The Door Assistant helps you to open the appliance door.
Before first use Inserting the Active AirClean filters Your refrigeration appliance is equipped with 2 Active AirClean filters which neutralize unpleasant odors in the refrigerator section. Insert the Active AirClean filters supplied as described under “Cleaning and care – Replacing the Active AirClean filters”. Miele@home Your refrigeration appliance is equipped with an integrated WiFi module. Networking is deactivated at the factory.
Before first use Operating the refrigeration appliance The touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react. 39°F39 °F 0 °F The sensor controls underneath the temperature display can be selected directly by touch; the symbols and text in or above the temperature display can only be displayed.
Before first use Starting up for the first time Open the appliance door. As soon as your refrigeration appliance has been integrated into your WiFi network, the message Connection successful will appear on your refrigeration appliance‘s display. Confirm the process with OK again. If the WiFi connection is active, will appear in the display. Select Skip if you would prefer to set up Miele@home later. Turn the refrigeration appliance on by pressing the On/Off switch.
Switching on and off Switching on the appliance Open the appliance door. Turn the refrigeration appliance on by pressing the On/Off switch. The refrigeration appliance will start to cool and the interior lighting will come on when the appliance door is opened. will appear, followed by the main screen on the refrigeration appliance display: Miele 39°F39 °F 0 °F The message Freezer temperature too high. Max.
Switching on and off Switching off for longer periods of time If the appliance is not going to be used for a longer period of time: Turn the appliance off. Unplug the appliance or switch off the breaker. Risk of damage due to frozen water intake pipe. If the water intake is blocked while the ice maker is still in use, the water intake pipe can freeze up. Turn the ice maker off if the water supply is interrupted (e.g., while on vacation). Close the faucet in the water supply line (approx.
Selecting additional settings In settings mode , certain settings can be adjusted and functions selected, allowing you to adjust the machine to suit your requirements. The following section only describe the functions in settings mode that require further explanation. The door alarm and other warnings are automatically disabled when the appliance is in settings mode .
Selecting additional settings Switching Eco Mode on or off is useful when you are going on vacation, for example, and you do not wish to switch off the appliance completely or do not need a high degree of cooling. Energy consumption in Eco Mode is lower than in normal operation. Eco Mode The fridge zone is regulated to a temperature of 43°F (6°C); the dry compartment in the SmartFresh zone is regulated to approx. 37°F (3°C). The freezer zone is regulated to a temperature of 3°F (-16°C).
Selecting additional settings Performing a Self Test Perform a Self Test if you are concerned that your refrigeration appliance is not working properly and want to check if it is suffering from any problems. In Settings mode , use the and sensor controls to select Self Test and select OK to confirm your selection. Touch the sensor control if you wish to terminate the process. The Self Test starts and the appliance is checked for any faults or malfunctions.
Selecting additional settings Switching on the Door Assistant You can choose between the two Door Assistants Push2Open and Pull2Open. The default Door Assistant is Push2Open. The Push2Open Door Assistant is suitable for cabinet fronts without handles. The door will then open automatically when you gently press against it. The Pull2Open Door Assistant is suitable for cabinet fronts with handles. The appliance door can be opened easily with little force.
Selecting additional settings – Adjusting the duration of the AutoClose function – Adjusting the intensity You can also adjust the duration for how long the appliance door will remain open until it closes automatically. You can also adjust the intensity of the Pull2Open function. The lower the set intensity, the less force required when you pull the appliance door. In Settings mode , use the and sensor controls to select Door Assistant and select OK to confirm your selection.
Selecting additional settings Activating Miele@home Miele@home Setting up Miele@home The message Set up Miele@home only appears if the refrigeration appliance has not yet been connected to a WiFi network. Connect your refrigeration appliance as described in “Before using for the first time”. Deactivating Miele@home In Settings mode , use the and sensor controls to select Miele@home and select OK to confirm your selection.
Selecting additional settings Setting up Miele@home again If you have changed your WiFi network, you can set up Miele@home again for your appliance. In Settings mode , use the and sensor controls to select Miele@home and select OK to confirm your selection. Use the and sensor controls to select Set up again and select OK to confirm your selection. Reset configuration? will appear on the display. Use the and sensor controls to select Yes or No and select OK to confirm your selection.
Selecting additional settings Resetting the settings to their default settings You can reset the refrigeration appliance‘s settings to their default settings. Reset the refrigeration appliance’s settings to the default settings when disposing of your refrigeration appliance, selling it, or putting a used refrigeration appliance into operation. This will reset the network configuration so that all personal data is deleted from the refrigeration appliance.
Selecting additional settings The refrigeration appliance‘s settings will be reset to the following values: Function Default settings Language English Display Brightness Average value (4 of 7 segments) Color Scheme Dark / Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average value (4 of 7 segments) Temperature Unit °Fahrenheit / Keypad Lock Switched off Eco Mode Switched off Door Assistant Push2open Miele@home Switched off Vacation Switched off
Selecting additional settings Switching Vacation mode on or off is useful when going on vacation, for example, if you do not wish to switch off the fridge zone completely or do not need a high degree of cooling. Vacation Food which does not spoil quickly can be stored in the appliance for some time at this moderate fridge-zone temperature and energy consumption is lower than in normal operation.
Selecting additional settings Switching Vacation mode on In Settings mode , use the and sensor controls to select the Vacation and select OK to confirm your selection. Use the and sensor controls to select On and select OK to confirm your selection. 14°C (57°F) is now displayed on the temperature display for the fridge zone and the interior lighting in the fridge will go out. The symbol will appear on the temperature display for the fridge zone.
Selecting additional settings - SuperFrost function (if previously switched on) - Ice Maker (if previously switched on) You can still select: - the sensor control for Settings mode so that Sabbath Mode can be switched off The Sabbath Mode function will switch itself off automatically after approx. 125 hours. Health risk caused by decomposing food. As any power failure during Sabbath Mode is not shown on the display, the frozen food may thaw or defrost. This will reduce the storage life of the food.
Selecting additional settings Switching on the Water Filter Display The Water Filter Display has been switched off. If the Water Filter Display has been switched off once, it must be switched on again if required. Resetting the Water Filter Display In Settings mode , use the and sensor controls to select the Water Filter Display and select OK to confirm your selection. Use the and sensor controls to select On and select OK to confirm your selection.
Selecting additional settings Switching on, switching off, or resetting the Display Active AirClean Filter The Display Active AirClean Filter will remind you approx. every 6 months that the Active AirClean filters have to be replaced. Change Active AirClean Filter will appear on the display. See “Cleaning and care – Replacing the Active AirClean filters” for instructions on how to replace the Active AirClean filters.
Selecting additional settings Resetting the Display Active AirClean Filter After you have replaced the Active AirClean filters, you must reset the Display Active AirClean Filter so that it can be displayed again after 6 months. If you do not reset the display, it appears again and again. In Settings mode , use the and sensor controls to select the Display Active AirClean Filter and select OK to confirm your selection.
The correct temperature It is very important to set the correct temperature for storing food in the appliance. Bacteria will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these bacteria. Reducing the temperature reduces their growth rate.
The correct temperature ... in the Freezer Zone To freeze fresh food and to store frozen food for a long time, a temperature of 0°F (-18°C) is required. At this temperature the growth of bacteria is generally halted. As soon as the temperature rises above 14°F (-10°C), the bacteria become active in the food again so it cannot be kept as long. For this reason, partially defrosted or defrosted food must not be re-frozen.
Using Automatic SuperCool and SuperFreeze Automatic SuperCool function The Automatic SuperCool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching off Automatic SuperCool Touch the sensor control to set the temperature. Use the and sensor controls to select the temperature display of the fridge zone and select OK to confirm your selection.
Using Automatic SuperCool and SuperFreeze SuperFrost function For best results, turn on the SuperFrost function before putting fresh food into the freezer. Fresh food will be frozen quickly, so that the nutritional value, vitamin content, appearance, and taste are maintained. Exceptions: - Placing food in the freezer that is already frozen. - When freezing up to 4.4 lb (2 kg) kg fresh food daily. Turning on SuperFrost SuperFrost should be turned on 4– 6 hours before placing food in the freezer.
Using Automatic SuperCool and SuperFreeze Tip: To save energy, you should manually switch off the SuperFrost function once the freezer reaches a constant temperature of 0°F (-18°C) or colder. Monitor the temperature in the freezer zone.
Temperature and door alarm Your appliance is equipped with a warning system to ensure that temperature increases in the freezer section do not go unnoticed and also prevents energy from being wasted when a door is left open. Temperature alarm The Freezer temperature too high. Max. temperature °C message appears in the display if the temperature in the freezer zone becomes too warm. An alarm will also sound.
Temperature and door alarm Door alarm The alarm will sound if an appliance door is left open for more than 2 minutes. The Close the door message also appears on the display. As soon as the corresponding door is closed, the alarm will stop and the message on the display will go out. Turning the door alarm off early If the alarm disturbs you, it can be turned off early. Touch the OK sensor control in the display. The alarm stops and the message disappears from the display.
Adjusting the interior fittings Removing or moving the door shelves Removing or moving the shelves Only move or remove the door shelves when they are empty. Hold the shelf on both sides and raise it slightly so that it can be lifted with the catches over the guide at the back. Pull the shelf forward. Hold the shelf on the frame with both hands and lift it slightly so that it can be lifted with the catches on both sides over the guide.
Adjusting the interior fittings Removing the hanging drawer Moving the hanging drawer The hanging drawer can be fixed under any shelf in the refrigerator section. Pull the hanging drawer out. To remove the holder for the hanging drawer, press against the retainers on both sides of the holder from the rear and pull the holder downwards diagonally from the frame. Pull the hanging drawer straight out to lift it over the pull-out stops on both sides.
Adjusting the interior fittings Removing compartments from the Fridge Zone Pull the compartment out a little bit. Removing the freezer baskets The freezer baskets can also be removed if necessary (e.g., for cleaning). Open the lower appliance door as wide as possible. Pull the freezer basket out as far as it will go. Using both hands, grasp the compartment frame from below and push the compartment downwards so that the rear end disengages and lifts upwards.
Adjusting the interior fittings Removing the dividing panel (depending on the model) The dividing panel in the freezer basket can be removed for cleaning: The dividing panel is secured to the freezer basket with brackets. Removing the ice cube tray The ice cube tray can be removed for cleaning: Open the lower appliance door as wide as possible. Tilt the ice cube tray forwards and pull it up and out to remove it. Ice cube production does not stop when the ice cube tray has been removed.
Storing food in the refrigerator section Always observe USDA food safety guidelines. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Risk of explosion due to flammable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store any explosive materials or products containing flammable propellants (e.g., spray cans) in the appliance.
Storing food in the refrigerator section Warmest area The warmest area in the refrigerator section is in the top section of the door. Use this for storing butter so that it remains spreadable and cheese so that it retains its flavor. Food which is not suitable for storage in the fridge zone Not all food is suitable for refrigeration at temperatures below 40°F (5°C) because it is sensitive to cold.
Storing food in the refrigerator section Notes on buying food The freshness of the food when it is first placed in the appliance is the most important factor for how long it stays fresh. Take into account the use-by date and the correct storage temperature. Time out of the fridge, e.g., transporting food in a warm car, should be kept to a minimum. Storing food correctly Ensure that food stored in the fridge zone is in packaging or covered properly (some exceptions apply in the MasterFresh zone).
Storing food in the MasterFresh zone MastertFresh zone The MastertFresh zone provides ideal storage conditions for fruit, vegetables, fish, meat, and dairy products. Food stays fresh considerably longer while retaining both flavor and vitamins. The MasterFresh zone comprises a humidity-controlled and a dry compartment. - Depending on the moisture-regulator setting, the humidity-controlled compartment is particularly suitable for storing fruit and vegetables.
Storing food in the MasterFresh zone The moisture regulator is used to regulate the amount of moisture in the humidity-controlled compartment with settings to . Position of the moisture regulator = slightly increased humidity Select this setting if you store very large quantities of fruits and vegetables in the humidity-controlled compartment. The moisture regulator partially closes the vents in the compartment so that some of the moisture present is retained.
Storing food in the MasterFresh zone Dry compartment with low temperature Tip: This compartment is ideal for all home-cooked meals as any microorganisms that may still be present cannot multiply. The dry compartment is ideal for storing perishable foods such as: The temperature in the dry compartment is maintained at 30 to 37°F ( -1 to 3°C). While lower than the temperature in a standard fridge zone, this is the optimum temperature range for storing fresh food which is not sensitive to cold.
Storing food in the MasterFresh zone The following tips may help if you find that food you have stored does not keep well (for example, the food wilts or becomes withered after only a short storage time): Only place fresh food in the appliance as the initial condition of the food is crucial to maintaining freshness. Clean the MasterFresh zone before storing food in it. Very wet food should be dried off before storing it in the humidity-controlled compartment.
Freezing and storing food Always observe USDA food safety guidelines. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded.
Freezing and storing food Storing frozen food Never re-freeze partially or fully defrosted food. Defrosted food must only be re-frozen after it has been cooked. When buying frozen food to store in your freezer, make sure to check: - that the packaging is not damaged - the expiration date - the temperature at which the frozen food is being stored in the store The length of time food can be kept is reduced if it has been stored at a temperature warmer than 0°F (-18°C).
Freezing and storing food - Placing hot food or drink in the freezer causes food that is already frozen to partially thaw and increases energy consumption. Allow hot food and drink to cool down before placing it in the freezer. Packaging food for freezing Freeze food in portions. – Suitable packaging - Plastic films Before placing food in the freezer When freezing more than 4.
Freezing and storing food Placing food in the freezer Storage time for frozen food Food to be frozen can be placed anywhere in the freezer zone. Place large quantities of food in the large freezer basket. The storage life of food is very variable, even at a constant temperature of 0°F (-18°C). Decomposition processes also take place in frozen food, albeit at a very reduced speed. Fat can become rancid from contact with oxygen in the air, for example. This is why lean meat can be stored approx.
Freezing and storing food Defrosting frozen goods Never re-freeze partially or fully defrosted food. Defrosted food may only be re-frozen after it has been cooked. Frozen food can be defrosted in different ways: - In a microwave - In an oven using “Convection” or the “Defrost” setting - At room temperature - In the Fridge Zone (the cold given off by the frozen food helps to keep the other food cold) - In a steam oven Flat pieces of partially thawed meat or fish can be placed directly into a hot skillet.
Making ice cubes For the automatic ice cube maker to operate, it must be connected to a water supply (see “Installation – Water supply”). Risk to health due to contaminated water. Consuming polluted water can lead to illnesses. The first 3 batches of ice cubes made after the ice cube maker is started up must not be consumed, as the water will have been used for the initial rinsing of the water supply line.
Making ice cubes Turning off the ice maker The ice maker can be turned off independently of the freezer zone if you do not want to make any ice cubes. Close the faucet in the water supply line (approx. 3 hours before switching off the appliance to avoid the buildup of bacteria caused by stagnant water). In Settings mode , use the and sensor controls to select the Dispenser Unit and select OK to confirm your selection.
Automatic defrosting WARNING! DANGER of injury Freezer Zone and damage! Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. The appliance is equipped with a “NoFrost” system. The freezer defrosts automatically. Refrigerator section and MasterFresh drawer The refrigerator section and the MasterFresh drawer defrost automatically.
Cleaning and care WARNING! DANGER of electric Cleaning agents shock! Unplug the appliance or trip the circuit breaker. To avoid damaging the surfaces of your appliance, do not use: WARNING! Fire hazard! - cleaning agents containing soda, ammonia, acids, or chloride Do not damage the coolant pipework. - cleaning agents containing lime scale remover Do not let water get into the electronic or the lighting.
Cleaning and care Before cleaning the appliance Turn the appliance off completely by pressing the On/Off switch. Take any food out of the appliance and store it in a cool place. Take out all other removable parts for cleaning (see “Adjusting the interior fittings”). Interior and accessories Clean the appliance regularly, or at least once a month. Clean up any spills, stains, or food immediately. Do not allow them to dry and stick to the appliance.
Cleaning and care Appliance front The appliance front has a special highquality finish (Clean Touch Steel). This is resistant to soiling and is very easy to clean. Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steel conditioning agent on these surfaces, as it will cause noticeable smearing. If soiling is allowed to sit for any length of time, it may become impossible to remove. Surfaces may become discolored or damaged.
Cleaning and care Cleaning the water filter (IntensiveClear 2.0 mesh filter) (see “Optional accessories”) Depending on the quantity of ice cubes produced, the IntensiveClear 2.0 mesh filter must be cleaned approx. every 6 months. You can use the Replace the water filter display on the display as a reminder to clean the water filter. Rinse the mesh under running lukewarm water. Turn the mesh over under the running water to clean it on all sides. 1. 4. 2.
Cleaning and care 6. Replacing the Active AirClean filters The Active AirClean filters in the refrigerator section need to be replaced approx. every 6 months. Change Active AirClean Filter will appear on the display. Confirm the message with OK. Turn the cap of the filter cartridge clockwise until it is in the horizontal position 6. Risk of damage caused by water rushing out. If the filter cartridge is not inserted correctly, there is a risk of water leaking out of the appliance.
Cleaning and care The holder can be fixed under any shelf in the refrigerator section. Once the Active AirClean filters have been replaced, the Active AirClean filter display must be reset using Settings mode on the display (see “Selecting additional settings – Resetting the Display Active AirClean Filter ”). New Active AirClean filters (both with and without a holder) can be obtained from Miele Service, your local dealer, or via the Miele website.
Water filter The appliance is supplied with a water filter (IntensiveClear 2.0 charcoal filter) that filters supply water for making ice cubes. Depending on the quantity of ice cubes produced, the IntensiveClear 2.0 charcoal filter must be changed approx. every 6 months. The IntensiveClear 2.0 charcoal filter improves the taste and smell of the ice cubes by removing chlorine and other substances from supply water.
Water filter Empty the old filter cartridge. Changing the water filter Air in the system can cause water to gush out and the filter cartridge to spring out when it is removed. Take great care when changing the water filter. Tip: The old filter cartridge can be disposed of with household trash. 6. 1. 2. Turn the cap of the filter cartridge counterclockwise until it is in the vertical position 1. and slide it out of the filter opening 2.
Water filter Once the IntensiveClear 2.0 charcoal filter has been replaced, the water filter display must be reset using Settings mode on the display (see “Selecting additional settings – Resetting the Water Filter Display ”). After inserting a new water filter, dispose of all ice cubes produced in the next 24 hours following the change. Using an external water filter If an external water filter is attached to your household water supply, use an IntensiveClear 2.
Water filter Performance Data Sheet Model: Miele 07134220 Use Replacement Cartridge 07134220 NSF System Trade name: WFS200MF & WFS210MF NSF Replacement Cartridge No: WFC100MF (for WFS200MF) & WFC110MF (for WFS210MF) System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401 for the reduction of the claims listed below. This system has been tested according to NSF/ANSI 42, 53, 401 for reduction of the substances listed below.
Water filter 4ubstance DEET Phenytoin Metolachlor Influent Dhallenge concentration Average Seduction Reduction requirement Max Qermissible Qroduct water concentration 1,400 ng/L ± 20% >98.7% N/A 200 ng/L 200 ng/L ± 20% >94.4% N/A 30 ng/L 1,400 ng/L ± 20% >98.7% N/A 200 ng/L Ibuprofen 400 ng/L ± 20% >95.3% N/A 60 ng/L Trimethoprim 140 ng/L ± 20% >96.7% N/A 20 ng/L Linuron 140 ng/L ± 20% >96.6% N/A 20 ng/L Naproxen 140 ng/L ±20% >96.
Water filter Lead-free certificate Lead free certificate This product is tested and certified by WQA against NSF/ANSI 372 for “lead free” This product F 1413 Vi (KIMSDF18US) is tested and certified by WQA against compliance. NSF/ANSI 372 for "lead free" compliance. Miele & Cie. KG Carl-Miele-Strasse 29 D-33332 Gütersloh Miele & Cie.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently Asked Questions Problem Possible cause and solution The compressor is switching on more frequently and for longer periods of time, so the temperature in the appliance is dropping. The ventilation slits in the cabinetry have been covered or become too dusty. Do not block the ventilation slits. Clean the ventilation slits on a regular basis. The doors have been opened too frequently, or a large amount of fresh food has been put in at once for storage or freezing.
Frequently Asked Questions Problem Possible cause and solution The compressor comes on less and less often and for shorter periods of time. The temperature in the appliance rises. This is not a fault. The temperature setting is too high. Correct the temperature setting. Check the temperature again after 24 hours. The compressor runs continuously. Not a fault. To save energy, the compressor runs at a lower speed when less cooling is required. This increases the compressor run time.
Frequently Asked Questions Problem Possible cause and solution The lower appliance The Door Assistant Push2Open is switched on; the door cannot be opened. lower appliance door cannot be opened. This is not a fault. With this refrigeration appliance, only the upper appliance door can be controlled via the Door Assistant. The appliance door The Push2Open Door Assistant is switched on at the cannot be opened when same time as Sabbath Mode.
Frequently Asked Questions Messages in the display Message Possible cause and solution The warning sounds The temperature in the appliance has risen signifiand the message Freezer cantly. temperature too high. Max. This could be due to, for example: temperature °C appears – the appliance door being opened too often, or on the display.
Frequently Asked Questions Message Possible cause and solution “F Please contact Miele Technical Service.” appears in the display and an alarm sounds. There is a fault. Make a note of the fault message if necessary. Contact Miele Service. To turn the alarm off, touch the symbol. The error message does not disappear from the display until the error has been rectified. The voltage level is too high/low. Observe the connection data under “Electrical connections”.
Frequently Asked Questions Problems with the ice cube maker Problem Possible cause and solution The ice maker is not producing any ice cubes. The refrigeration appliance and the ice maker are not switched on. Switch the refrigeration appliance and the ice maker on. Check whether the water filter is inserted correctly. The plumbed water connection was not installed. Make sure that the plumbed water connection was installed correctly. The water intake is not open or has not been vented.
Frequently Asked Questions Problem Possible cause and solution The ice maker is only producing small ice cubes. Several household appliances connected to the plumbed water connection are in operation, which has reduced the amount of water being taken in. Avoid using the dishwasher, washing machine, etc. at the same time. The water filter is clogged. Check whether the water filter needs to be replaced or cleaned. The water pressure is too low.
Frequently Asked Questions Problem Possible cause and solution Water is flowing out of the appliance. The water intake is faulty. Close the faucet immediately. Check the water line for damage. Contact Miele Customer Service. Check whether the water connection pressure is too high. If the water connection pressure is too high, this can cause leaks (see “Installation – Plumbed water connection”). Check that the water connection is between 29 psi and 116 psi (2 bar and 8 bar).
Frequently Asked Questions The interior lighting is not working. Problem Possible cause and solution The interior lighting is not working. The refrigeration appliance has not been turned on. Turn the refrigeration appliance on. The Sabbath Mode function is switched on: the temperature display is dark and the symbol is shown on the display. You can switch off Sabbath Mode at any time via the Settings mode . There is a fault. Risk of electric shock due to exposed, live electrical components.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. Click... Clicking sounds occur whenever the thermostat switches the motor on or off. Sssrrrrr... You can sometimes just hear the sound of the fan inside the appliance. Crack...
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Declaration of conformity Frequency range 2.412 GHz – 2.
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. Furthermore, this device/appliance contains software components which are distributed under open source license conditions.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Customer Service & Support Phone: 888-99-MIELE(64353) info@mieleusa.com www.mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
KF 2802 SF, KF 2812 SF, KF 2902 SF, KF 2912 SF en-US, CA M.-Nr.
