Convection Oven Manual

Features
31
The FlexiClips with wire rack can
support a maximum load of 33lb
(15kg).
Installing and removing the FlexiClip
telescopic runners
 Danger of burns! Make sure the
heating elements are turned off and
that the oven cavity is cool.
The FlexiClip telescopic runners are
inserted in between the two rails that
make up a shelf level.
The telescopic runner with the Miele
logo must be inserted on the right.
When inserting or removing the
telescopic runners, do not extend
them.
 Hook the FlexiClip runner onto the
front of the lower rail of a side runner
(1.) and then push it along the rail into
the oven compartment (2.).
 Then secure the FlexiClip runner to
the bottom of the two rails as
illustrated (3).
If the telescopic runners are difficult
to pull out after inserting, you may
need to pull firmly to release them.
To remove a FlexiClip telescopic runner:
 Push the FlexiClip runner in all the
way.
 Remove the FlexiClip telescopic
runner by raising it at the front (1)
then pulling it forwards along the rail
and out (2).