Operation Manual

Problem Possible cause and remedy
i2:00 is flashing in the
display.
There has been a power cut.
^
Reset the time of day (see "Using for the first time").
Cooking durations will also need to be reset for any
programme in use.
PY is lit up or flashing in
the display.
There has been a power cut which has caused the
pyrolytic cleaning programme to stop.
The 0 symbol will remain lit up and the door locked
until the temperature inside the oven drops to below
280 °C.
^ Turn the function selector to 0.
The clock display will start to flash.
^ Reset the time of day (see "Using for the first time").
0:00 appears
unexpectedly in the
display and T is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Turn the function selector to 0.The oven is now ready
to use again immediately.
A noise can be heard
after a cooking process.
The cooling fan is switched on.
The cooling fan will switch off automatically when the
temperature in the oven interior has fallen sufficiently.
Problem solving guide
86