Operating and Installation Instructions

Settings
45
- Some software updates can only be
carried out by Miele Customer Service.
Calibrate temperature
You can change the temperature in
increments in all operating modes and
automatic programs so that it is higher
or lower in the oven compartment than
displayed.
The temperature calibration is
represented by a bar with seven
segments.
      
If all of the segments are filled, the oven
compartment temperature is much
higher than displayed. If one segment is
filled, the oven compartment
temperature is much lower than
displayed.
Electrical version
You can set the voltage variant. The
setting must correspond to the voltage
of your domestic electrical supply.
Software version
The software version menu option is for
use by Miele Technical Service. You do
not need this information for domestic
use.
 Confirm with OK.
Legal information
You can find an overview of the
integrated open-source components
under Open source licenses.
 Confirm with OK.
Showroom Program
This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo Mode
If you have Demo mode activated,
Demo mode is active. The appliance will
not heat up will appear when you turn
on the oven.
- On
Touch OK for at least 4seconds to
activate Demo mode.
- Off
Touch OK for at least 4seconds to
deactivate Demo mode. You can use
the oven as normal.
Factory default
- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- Favorites
All Favorites will be deleted.
- MyMiele
All MyMiele entries will be deleted.
- Recommended temps.
Any recommended temperatures that
have been changed will be reset to
the factory default settings.