Operating and Installation Instructions

Table Of Contents
Installation
*INSTALLATION*
110
Taking the oven out of the housing
unit
Open the door.
Unscrew the knurled nuts and bolts
from the front frame (see “Securing
the oven in the housing unit”).
Keep these parts in case the oven
needs to be installed again in the
future.
Pull the oven out of the housing unit
until the holes for the carry handles
are visible (1.).
Insert the carry handles into the holes
at the top of the side walls on each
side of the oven (2.).
Do not carry the oven by the door
handle. This could damage the door.
Use the carry handles on the side of
the housing to lift the appliance.
Take the oven out of the housing unit.
Turn off the water supply.
Disconnect the oven from the power
supply and the water supply.