Operating Instructions Dishwashers To prevent accidents and machine damage, read these instructions before installation or use. en-US HG07-W M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 7 Guide to the appliance ...................................................................................... 17 Machine overview................................................................................................ 17 Control panel ....................................................................................................... 18 Caring for the environment ...............................
Contents Refill indicators .................................................................................................... AutoOpen ............................................................................................................ 2nd interim rinse.................................................................................................. Knock2open ........................................................................................................ BrilliantLight....................
Contents Unloading the dishwasher................................................................................... 73 Interrupting a program......................................................................................... 74 Canceling or changing a program ....................................................................... 74 Options ............................................................................................................... 75 Timer .......................................
Contents Water drainage .................................................................................................... 118 Electrical connection ........................................................................................... 120 Sound emission testing ....................................................................................
IMPORTANT SAFETY INSTRUCTIONS This dishwasher complies with all current local and national safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please observe the installation sheet and read the operating instructions carefully before setting up the dishwasher and using it for the first time. They both contain important information on the installation, safety, use, and maintenance of the machine. This prevents both personal injury and damage to the dishwasher.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. This dishwasher is intended for use at altitudes of up to 13,000 ft (4,000 m) above sea level. This dishwasher must only be used for cleaning domestic dishes and cutlery. All other types of use are not permitted.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the dishwasher unless they are constantly supervised. Children must not be allowed to clean or maintain the appliance. Children should be supervised in the vicinity of the dishwasher. Never allow children to play with the dishwasher. There is a danger that children might shut themselves in the dishwasher.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs should only be carried out by a Miele authorized technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher and in particular following transport, check it for any visible damage. Never use a damaged dishwasher.
IMPORTANT SAFETY INSTRUCTIONS Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency, and voltage) match the electricity supply. This data must correspond in order to avoid the risk of damage to the dishwasher. Compare these before connecting the appliance to the electricity supply. If in any doubt, consult a qualified service technician.
IMPORTANT SAFETY INSTRUCTIONS The water-connection pressure needs to be between 7.25 and 145 psi (50 and 1,000 kPa). A damaged dishwasher could be dangerous. If the dishwasher gets damaged, turn it off at the electricity supply immediately and contact your Miele dealer or Miele Customer Service. The manufacturer’s warranty may be invalidated if the appliance is not repaired to Miele authorized service standards. We recommend replacing defective components with original parts.
IMPORTANT SAFETY INSTRUCTIONS Correct installation The dishwasher must be installed and connected in compliance with the supplied installation sheet. Be careful before and while installing the dishwasher. Some metal parts pose a risk of injury/being cut. Wear protective gloves. The dishwasher must be correctly aligned horizontally to ensure problem-free operation.
IMPORTANT SAFETY INSTRUCTIONS Dishwasher detergents can cause burning on the skin and in the eyes, nose, mouth, and throat. Avoid contact with detergents. Do not inhale powder detergents. Do not swallow dishwasher detergents. Seek medical attention immediately if detergent has been swallowed or inhaled. Avoid leaving the dishwasher door open unnecessarily. You could injure yourself on the opened door or trip over it. Do not sit, stand, or lean on the opened door. The dishwasher could tip over.
IMPORTANT SAFETY INSTRUCTIONS In dishwashers with a cutlery basket (depending on model), knives and forks should be placed with the handles upwards in the basket for safety reasons. Knives and forks placed with the handles downwards pose a danger of injury. However, cutlery placed handle down in the cutlery basket will come out cleaner and drier.
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old dishwasher Remove the door of the dishwasher so that children cannot become trapped inside. FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference.
Guide to the appliance Machine overview a Door locking pins h Filter combination b Top spray arm i Salt reservoir c 3D MultiFlex Cutlery Tray (depending on model) j Data plate d Upper basket (depending on model) l Detergent compartment e Middle spray arm m AutoDos detergent outlet f Aeration valve n AutoDos (automatic dispensing) k Rinse aid reservoir g Bottom spray arm 17
Guide to the appliance Control panel a In-operation indicator light For indicating an ongoing wash program when the door is closed. b On/Off sensor button For turning the dishwasher on and off. c Remote start sensor button For activating/deactivating the Remote start option. These operating instructions apply to several different dishwasher models of different heights. The specific dishwasher models are referred to as follows: Standard = 31 11/16" (80.
Guide to the appliance Display functions The display is used to select or set the following: - the program - The options - the Timer - the Settings The display can show the following: - the program name - the program stage - The estimated time left for the program to run - Any relevant fault messages and information To save energy, the dishwasher turns off after a few minutes if you do not press any sensor buttons during this time. Touch the sensor button to turn the dishwasher back on.
Guide to the appliance Examples of how to operate the appliance Main menu Use the Back sensor button to switch from the Programs menu to the main menu. Programs Settings You can alter the dishwasher’s controls to suit changing requirements in the “Settings” menu (see “Settings”). You can scroll to the right or the left by swiping your finger across the display.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Before using for the first time Every dishwasher is tested at the factory. There will be residual water in the machine from this test. It is not an indication that the dishwasher has been used previously. Opening the door In some programs, the door automatically opens slightly to assist the drying process. This function can be deactivated, if preferred (see “AutoOpen” under “Settings”). This dishwasher has a motorized door opener which is activated by knocking on the door front (Knock2open function).
Before using for the first time Door-opening aid If the door will not open when knocked or if there is a power failure, the door can be opened manually with the dooropening aid supplied with the dishwasher. Then use it to pull the door open. Closing the door Insert the baskets. Then lift the door upward and push until it clicks into position. Push the door-opening aid into the gap between the dishwasher front and the neighboring unit door about 5 7/8" (15 cm) below the countertop.
Before using for the first time Miele@home Your dishwasher is equipped with an integrated WiFi module. To use this feature, you will need: - A WiFi network - The Miele app - A Miele user account. The user account can be created via the Miele app The Miele app will guide you as you connect your dishwasher to your home WiFi network.
Before using for the first time Basic settings Setting up Miele@home Turning on the dishwasher The message Activate Miele@home? will appear on the display. Open the door. Turn the dishwasher on using the sensor button. The welcome screen will appear when the dishwasher is turned on and the welcome melody will sound. For further information about the display functionality, see “Display functions” under “Guide to the appliance”. If you want to set up Miele@home now, select the Yes option.
Before using for the first time Setting the time The time is updated automatically if a connection is established with the WiFi network. The display will then change to the screen for setting the clock format and the time of day. The current time of day must be set before you can use the timer option. Select the setting you want for the clock format. Set the hours and the minutes and confirm by pressing OK. Setting the water hardness The display changes to the screen for setting the water hardness.
Before using for the first time Activating AutoDos The display changes to the settings screen for AutoDos (see “Automatic dispensing/AutoDos” under “Detergent”). Even if you do not wish to use AutoDos, you must remove the transport locking device from the PowerDisk compartment before running the first program (see “Activating AutoDos” under “Detergent”). You can activate AutoDos.
Before using for the first time Reactivation salt In order to achieve good cleaning results, the dishwasher needs to operate with soft water. Hard water results in the build-up of calcium deposits on dishes and on the inner surfaces of the machine. Domestic water with a hardness level higher than 5 gpg (5 °dH – German scale) must be softened. This occurs automatically in the integrated water softener. The water softener is suitable for a water hardness level of up to 73 gpg (70 °dH – German scale).
Before using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 1/2 gallon (2 l) of water to enable the salt to dissolve. Once the dishwasher has been used once, there is always sufficient water in the salt reservoir. Remove the lower basket from the wash cabinet and unscrew the salt reservoir cap. Danger of corrosion due to saline solution. Water or saline solution will run out of the reservoir when the cap is opened.
Before using for the first time Refilling the salt Fill the salt reservoir with reactivation salt when Refill salt and start the “QuickIntenseWash” program with the “Express” option without a load appears in the display. Confirm with OK. The salt refill indicator will go out. Danger of corrosion due to saline solution. Salt solution that runs out can cause corrosion in the wash cabinet and to the wash items.
Before using for the first time Rinse aid Rinse aid is necessary to ensure that water does not cling and leave marks on dishes during the drying phase, and helps dishes dry faster after they have been washed. Rinse aid is poured into the container and the amount set is dispensed automatically. Liquid dish soap or detergent can cause damage. Liquid dish soap and detergent can damage the rinse aid reservoir. Only fill it with rinse aid formulated for domestic dishwashers. Risk of acid damage.
Before using for the first time Adding rinse aid Close the lid firmly until you hear it click into place. Otherwise, water can enter the rinse aid reservoir during a program. Wipe up any spilled rinse aid. This prevents excess foam developing during the next program. You can adjust the rinse aid dosage for best wash results (see “Rinse aid” under “Settings”). Filling the rinse-aid reservoir Press the yellow button on the lid of the rinse aid reservoir.
Settings You can alter the dishwasher’s controls to suit changing requirements by adjusting the settings. The settings can be altered at any time. Opening the settings menu Turn the dishwasher on using the sensor button. The Programs menu will appear in the display. For further information about the display functionality, see “Display functions” under “Guide to the appliance”. Switch to the main menu using the sensor button. Touch the Settings sensor button.
Settings Language Water hardness The display can be set to appear in one of several different languages. Your dishwasher is fitted with a water softener. You can change the language used in the display and also the country via the Language sub-menu. - The dishwasher must be programmed to the correct water hardness for your area. The flag after the word Language serves as a guide if a language that you do not understand has been set.
Settings °d gr/gal °fH Display 11 11 20 11 12 13 22 12 13 14 23 13 14 15 25 14 15 16 27 15 16 17 29 16 17 18 31 17 18 19 32 18 19 20 34 19 20 21 36 20 21 22 38 21 22 23 40 22 23 24 41 23 24 25 43 24 25 26 45 25 26 27 47 26 27 28 49 27 28 29 50 28 29 30 52 29 30 31 54 30 31 32 56 31 32 33 58 32 33 34 59 33 34 35 61 34 35 36 63 35 36 38 65 36 37-45 39-47 66-80 37-45 46-59 48-62 82-105 46-59 60
Settings AutoDos (AutoDos) Rinse aid AutoDos automatically adjusts the amount of detergent to the selected program. In the Auto program, the quantity is adjusted depending on the degree of soiling of the dishware. You can adjust the rinse aid dosage for best results. The rinse aid dosage can be set from 0 to 6 ml. 3 ml is the factory default setting. If you want to extend the service life of the PowerDisk, you can reduce the dispensing quantity.
Settings Miele@home App Your dishwasher is equipped with an integrated WiFi module. The Miele app is available to download free of charge from the Apple App ® Store or from the Google Play Store™. You can connect your dishwasher to your WiFi network. This will increase the energy consumption, even when the dishwasher is turned off. The “Settings” and “Miele@home settings” menus will be added as additional menu options.
Settings WPS Deactivate As an alternative to networking via the Miele app, you can connect your dishwasher to your WiFi network using WPS (Wireless Protected Setup). If you do not wish to use the WiFi module of your dishwasher, you can turn it off. Your WiFi router must support WPS. Select the Deactivate menu option and confirm with OK. Confirm the message Press the WPS button on your router with OK. In the Miele@home menu, the menu option Activate will now be displayed instead of Deactivate.
Settings Displaying the Connection status Reset network configuration? You can call up the current connection status of your dishwasher. This menu option only appears if you have already connected your dishwasher to your WiFi network. Select the Connection status menu option and confirm with OK. Use the sensor buttons to consecutively call up the WiFi signal strength, the name of your router, and the associated IP address. Select OK to confirm the messages.
Settings Remote control This menu option will only be displayed if you have connected your dishwasher to your WiFi network (see “Miele@home” under “Settings”). If you wish to permanently turn off the Remote control option, you can do this under this menu option. The sensor button will then no longer be available to select until you change this setting again. Even if the Remote control option is turned off, you can use Miele to call up information about your appliance.
Settings Running RemoteUpdate Information about the content and scope of a RemoteUpdate will be provided in the Miele app. A message will appear in your dishwasher display if a software update is available. You can install the update immediately or postpone this until later. When the appliance is turned on again, you will be reminded about the update. Deactivate RemoteUpdate if you do not want to install the update. The update may take several minutes.
Settings EcoStart This option is not available in all areas. In order to run your dishwasher in the most economical way, you can use the EcoStart option to take advantage of your electricity supplier’s cheaper energy tariffs (see “Timer” under “Options”). With this option selected, your dishwasher will start automatically at your electricity supplier’s cheapest rate times. Setting the electricity-rate times Before you can use the EcoStart option, you must set at least one electricity-rate time.
Settings Changing the electricity-rate times Deleting the electricity-rate times You can change the start, finish, or priority of an electricity-rate time. You can delete the settings for an electricity-rate time and in doing so deactivate the EcoStart option for this time zone. Select an electricity rate time from R1–R3 to change. Select the setting you want to change. Change the setting and confirm with OK. The selected settings are displayed. The change will be saved.
Settings Temperature Volume You can set whether the temperature should be displayed in °F/Fahrenheit or °C/Celsius. A sequence of audible signals will sound at the end of the program or if there is a fault, provided that the audible signals have been activated. The factory default setting is °C/Celsius. Display brightness You can set the display brightness to one of 7 different levels on the bar chart.
Settings Memory AutoOpen When the Memory function is switched on, the most recently started program is saved. In some programs the door automatically opens slightly to assist the drying process. When you switch the dishwasher off and back on again after the end of a program, the last program started will be selected. This may increase energy consumption. This function can be deactivated if you wish.
Settings 2nd interim rinse BrilliantLight You can choose this function to increase the cleaning performance of the programs with a second interim rinse. This dishwasher is equipped with interior lighting. When the door is open, the lighting turns off automatically after 15 minutes. When this function is activated, water consumption may increase. If this function is switched on, it will be applied to all programs until it is switched off again.
Settings Legal Information You can view legal information about the open source licenses for your dishwasher. Copyrights and licenses for operator and control software Miele uses their own and third party software which is not subject to any socalled open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected.
Settings Showroom For demonstration purposes only. The dishwasher is equipped with a demo mode for showroom use. Factory default You can reset all dishwasher settings to the factory default settings. WiFi module settings (where applicable) have to be reset separately (see “Miele@home” under “Settings”). Select Reset settings?. Select the Yes option and confirm with OK.
Caring for the environment Energy-saving dishwashing This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your machine by following these tips: - If you are manually dosing the detergent, reduce the amount of detergent 1 by /3 when using powder or liquid detergent if the baskets are only half full. - Washing in a dishwasher generally uses less water and energy than washing by hand.
Loading the dishwasher General information Remove coarse food residues from dishes. There is no need to pre-rinse items under running water. Damage can be caused by ash, sand, wax, lubricating grease, or paint. These substances will contaminate the dishwasher and can then no longer be removed. Do not wash items soiled with these substances in the dishwasher.
Loading the dishwasher Wash items not suitable for dishwashers: Damage due to caustic alkaline - Craft items, antiques, valuable vases, and decorative glassware. Such items are not suitable for dishwashers. detergents. Aluminum parts (e.g., the grease filters of ventilation hoods) can be damaged by caustic alkaline detergents. In extreme cases, there is a risk of an explosive chemical reaction (such as an explosive oxyhydrogen gas reaction).
Loading the dishwasher Loading examples Loading for 10 standard place settings with cutlery tray Upper basket Cutlery tray 52 Lower basket
Loading the dishwasher Loading for 16 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray 53
Loading the dishwasher Upper basket Loading the upper basket Risk of damage due to water leakage. If you run the dishwasher without the upper basket, water can leak out of the dishwasher. Only run the dishwasher with the upper basket in place (except during the Tall Items program, if available). Loading the FlexCare cup rack You can put cups, small bowls, and flat dishes on the FlexCare cup rack. Glasses can be arranged along the cup rack so they sit securely during the program.
Loading the dishwasher Adjusting the FlexCare cup rack You can set the height and depth of the cup rack at 2 different levels so that it can accommodate larger cups and so that taller items can be placed underneath it. Pull the cup rack upwards and click it into the desired position (see arrow). Loading the silicone elements of the FlexCare cup rack The silicone elements in the cup rack are specially designed to hold tall glasses with long stems securely.
Loading the dishwasher Lowering the spikes On both right-hand rows of spikes, you can lower every other spike to make it easier to arrange larger dishes, like cereal bowls. Press the yellow lever downwards , and then lower the dark gray spikes . Place the bowls vertically in the row of spikes.
Loading the dishwasher Adjusting the upper basket To raise the upper basket: In order to gain more space for taller items in the lower basket or upper basket, the upper basket can be adjusted on 3 levels with 3/4 " (2 cm) between each level. Lift the basket until it clicks into place. The upper basket can also be set at an angle so that water can run off freely from recesses. Make sure, however, that the basket can slide smoothly in and out of the wash cabinet. Pull out the upper basket.
Loading the dishwasher Lower basket Loading the lower basket Place larger and heavier items such as plates, serving platters, saucepans, bowls, etc., in the lower basket. Glasses, cups, and small plates and saucers can also be placed in the lower basket. Lowering the spikes The rows of spikes at the front are used for loading plates, soup bowls, platters, dessert bowls, and saucers. The spikes can be lowered to make more room for large items, e.g., pots, pans, and dishes.
Loading the dishwasher Loading the FlexCare glass holder with MultiClips The silicone elements in the glass holder provide a stable and secure hold for delicate stemware. The MultiClips enable you to fasten wash light items such as those made from plastic onto the glass holder. Stemware such as wine glasses, champagne flutes, and beer glasses can be leaned against the glass holder or suspended from it. The glass holder can be raised to make more room for tall items.
Loading the dishwasher Loading the glassware rail Lowering the bottle holder This rail is designed to hold tall glasses and glasses with stems securely. The bottle holder can be used to keep narrow items such as milk and baby bottles secure during a program. Raise the bottle holder upwards and push it down until it clicks into place. Lower the rail and lean tall glasses against it. If the bottle holder is not needed, lift it up using the yellow lever and fold it to the side .
Loading the dishwasher Filters Loading the filters You can also wash Miele VentilationHood Filters. You can wash 2 ventilation hood filters in the upper basket and 2 filters in the lower basket at once. Select the Filters program for optimum dishwashing results. If you only want to wash 2 filters, put them in the upper basket. Damage caused by protruding parts. Protruding parts can damage the dishwasher. Load the filters in such a way that no corners protrude over the side of the basket.
Loading the dishwasher Cutlery tray Load the cutlery into the 3D MultiFlex Tray. Loading the 3D MultiFlex Tray To make unloading easier, utensils should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs off them freely.
Detergents Active ingredients Damage caused by using unsuitable detergents. Detergents that are not suitable for domestic dishwashers can cause damage to the dishwasher or to the wash items. Only use detergents formulated for domestic dishwashers. Modern detergents contain various active ingredients, the most important of which are: - Water softening complexing agents to prevent calcification. - Alkalis to aid removal of dried-on soiling. - Enzymes to break down starch and loosen protein.
Detergents Risk of chemical burns from de- Detergent dispensing tergent. Dishwasher detergents can cause burning on the skin and in the eyes, nose, mouth, and throat. Avoid contact with detergents. Do not inhale or ingest powder detergents. Do not swallow dishwasher detergents. Seek medical attention immediately if detergent has been swallowed or inhaled. Keep children away from detergents. Detergent residues could still be present in the machine.
Detergents Automatic dispensing/AutoDos Activating AutoDos Before you can use AutoDos, you must insert a PowerDisk containing powder detergent into the PowerDisk compartment. Turn the dishwasher on using the sensor button. One PowerDisk contains enough detergent for approx. 20 rinse cycles, depending on the chosen program. PowerDisks are available to order directly from Miele’s online store, Miele Customer Service, or from your Miele dealer. Risk of chemical burns from residual detergent.
Detergents Inserting a PowerDisk Turn on the dishwasher before you replace the PowerDisk so that the dishwasher recognizes it. Only replace the PowerDisk when the message PowerDisk empty. Deactivate AutoDos with OK. appears. If the arrows in the PowerDisk holder and in the viewing window are not pointing toward each other, remove the PowerDisk holder (see “Cleaning the AutoDos” under “Cleaning and care”). Turn the AutoDos lid to and open it. The message AutoDos lid open will appear on the display.
Detergents The detergent powder must be dry so that it does not clump together. Do not fill the AutoDos with any type of fluid. In order to ensure that the AutoDos works at its best, check it each time you replace the PowerDisk and clean it if needed (see “Cleaning the AutoDos” under “Cleaning and care”). Close the AutoDos lid and turn it until the lid handle is directly below the symbol.
Detergents Manual detergent dispensing Adding detergent Detergent must be manually dispensed if you have deactivated AutoDos in a program's Options menu. Detergent dispensing The detergent compartment holds a maximum of 3 1/2" tablespoons. There are marks in the detergent compartment to aid with dispensing: 1 1/4, 2 tablespoons (20, 30 ml). When the door is opened to a horizontal position, they show the approximate fill level in ml and the maximum fill height.
Detergents The detergent must not cause the detergent-compartment lid to get stuck. This can prevent the lid from opening during the program. Do not overfill the detergent compartment. If you wish, deactivate automatic dispensing/AutoDos. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.
Operation Turning on the dishwasher Selecting a program Turn on the water supply if it is turned off. Choose your program according to the type of load and the degree of soiling. Open the door. The different programs and their uses are described under Program overview. Make sure the spray arms can rotate freely. Tap the sensor button. If the dishwasher has been turned off for longer than 1 minute, you will need to hold the sensor button for a bit longer (wipe protection).
Operation Display of program duration Starting a program The estimated duration of the selected program appears on the display before the program begins. If the door is opened during the program, the time left until the end of the program is displayed. Start the program by closing the door within 4 seconds of the last press of a button. If necessary, confirm the previously displayed message with OK. The displayed duration may vary for the same program.
Operation End of program Energy management At the end of a program, the in-operation indicator light will be flashing slowly with the door shut. The audible signal may also be sounding. To save energy, the dishwasher will turn off automatically 10 minutes after the last time a sensor button is pressed or after the end of a program. The in-operation indicator light will go out 10 minutes after the end of the program if the door is closed.
Operation Turning off the dishwasher Unloading the dishwasher Open the door. Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comfortable enough to handle before unloading them. The dishwasher can be turned off at any time using the sensor button. Confirm the query Turn appliance off? with Yes. Turning the dishwasher off during a program stops the program. You can also do this to stop an ongoing timer. Risk of damage from leaking water.
Operation Interrupting a program A program will be interrupted as soon as the door is opened. After 4 seconds, the message Press “OK” to continue will appear on the display. Confirm with OK and close the door within 4 seconds. The program will continue from the point at which it was interrupted. Risk of scalding due to hot water. During operation, water in the dishwasher may be very hot. During operation, only open the door with extreme caution.
Options Timer Activating the timer The timer gives you several options for starting a program at a later time. The start or finish time of a program can be delayed. You can also use the EcoStart or SmartStart functions to benefit from cheaper energy rates at night. Open the door. During manual detergent dispensing, the detergent will clump together if the detergent compartment is not dry, and this may mean it is not fully rinsed out.
Options Setting “Start at” Setting “Finish at” With the Start at function, you set the exact time at which you want the program to start. Use the Finish at function to set the latest time by which the program selected has to be finished. Set the hours with the sensor buttons. Set the hours with the sensor buttons. Touch the minute number block. Touch the minute number block. Use the sensor buttons to enter the minutes and confirm your entry with OK.
Options Setting EcoStart Setting SmartStart The EcoStart function enables you to benefit from cheaper electricity rates at night. Before you can use this option, you need to set up to 3 electricity-rate time zones (see “EcoStart” under “Settings”). Then set the time by which the selected program has to be finished. The dishwasher will then start automatically in the most economical rate zone within the time set.
Options Set the time by which the selected program has to be finished. Changing and deleting the timer Set the hours with the sensor buttons. You can change the time set for the timer or delete it in order to start the selected program immediately. Touch the minute number block. Changing the timer Use the sensor buttons to enter the minutes and confirm your entry with OK. Open the door. Waiting for SmartStart will appear in the display. Close the door.
Options Activating Remote start You can start your dishwasher remotely using the Miele app. To do this, you first need to install the app on your mobile device, connect the dishwasher to your WiFi network (see “Miele@home” under “Settings”), and, if applicable, activate the Remote control option (see “Remote control” under “Settings”). Open the door. Touch the Remote sensor button. The Remote start option will also remain active if you turn the dishwasher off and back on again in the meantime.
Program overview Program When to use Program sequence Prewash Main wash Interim rinse Program for regular use to completely wash a full load of normally soiled dishes with the ability to adjust energy and water consumption based on the soil load of the dishes. 140– 158/60 –70 133– 149/56 –65 For heavily soiled dishes and normally soiled pots,pans and utensils with dried on residue; use 20% more detergent than recommended.
Program overview 2 2 Consumption Energy 2 Duration Water Cold water Hot water 50°F/10°C 120°F/49°C Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C kWh kWh h:min h:min 1.06 1.20 3.2/12.1 3:04 2:43 1.40 1.55 3.4/13.0 3:29 3:11 0.90 1.05 3.3/12.5 2:45 2:25 1.10 1.15 2.9/11.0 1:13 0:58 1.45 1.55 2.4/9.0 2:43 2:27 0.01 0.15 1.1/4.0 0:21 0:21 1.00 1.15 2.5/9.5 4:10 3:56 Values were calculated under standardized testing conditions.
Program overview Program When to use Program sequence Prewash Main wash Interim rinse Final rinse °F/°C Drying °F/°C Economy Water and energy saving program for standard dishes soiling that has not dried on, with a long soaking time and a low temperature. - 113/45 113/45 Energy Saver The water intake temperature must be 115°F (45°C) for light to normally soiled dishes. Filters Wash program for cleaning Miele ventilation hood filters.
Program overview 2 2 Consumption Energy 3 4 Water Cold water Hot water 50°F/10°C 120°F/49°C Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C kWh kWh h:min h:min 0.70 0.80 2.4/9.0 4:03 3:53 - 0.05 7.0/26.5 - 2:47 1.55 1.70 3.3/12.5 3:51 3:35 1.75 2.00 5.0/19.0 2:37 2:07 2:28–3:45 2:16–3:27 0.85–1.25 2 Duration 3, 4 3, 4 0.90–1.40 3, 4 1.7–3.2/6.5–12.0 1.10 1.25 3.6/13.5 2:49 2:27 0.75 0.85 2.4/9.
Options Selecting options You can use options to adjust the programs. To do this, you can select or deselect the options in the Options menu of a selected program before running it. Open the door. Turn the dishwasher on using the sensor button. Select a different program as required. All available Options will be shown in the display. Not all options can be selected in every program or used in combination. Options that are not available are grayed out and cannot be selected.
Options IntenseZone Extra clean The IntenseZone option increases cleaning performance in the lower basket. You can select this option to increase the cleaning performance of the programs. Energy consumption increases due to the extended wash duration in the lower basket and increased temperature. If you activate this option, the program cycle times and the main wash temperatures will increase. The water and energy consumption may increase. Express The Express option reduces the program cycle time.
Cleaning and care Check the condition of your dishwasher regularly (approx. every 4– 6 months). This helps to avoid faults and problems. Cleaning the wash cabinet Damage due to unsuitable clean- The frequent use of low-temperature wash programs increases the risk of contamination and odors inside the wash cabinet. Run the Pots & Pans program once per month to clean the wash cabinet and prevent odors from developing. ing agents. All surfaces are susceptible to scratching.
Cleaning and care Hygiene cycle The frequent use of low-temperature wash programs increases the risk of contamination and odors inside the wash cabinet. If you repeatedly use low-temperature programs, you should regularly run a high-temperature program. This is to prevent contamination and odors. You can activate or deactivate a Hygiene info message (see “Settings – Hygiene cycle”).
Cleaning and care Cleaning the control panel The control panel should only be wiped with a damp cloth. Cleaning the reflector panel The reflector panel for the in-operation indicator light is situated on the cover sheeting underneath the countertop. The reflector panel should only be cleaned with a damp cloth if necessary. Cleaning the front of the machine Damage due to soiling.
Cleaning and care Cleaning the AutoDos assembly If the Clean AutoDos message is displayed, check that the fill channel is clean, and clean it if necessary, e.g., powder residues. This helps keep the AutoDos working properly. Turn the AutoDos lid to and open it. Remove the PowerDisk if appropriate. In order to ensure that the AutoDos works at its best, check it each time you replace the PowerDisk and clean it if needed. Pull the PowerDisk holder upward by the yellow tabs and remove it.
Cleaning and care Clean the fill channel using water and a soft brush if necessary. It is very important that no moisture is able to access the inside of the AutoDos system during cleaning. Dry the fill channel well so that the detergent powder does not clump together. Insert the fill channel again until the tab clicks into place. Put the holder back into place so that the arrows in the PowerDisk holder and in the viewing window point toward each other. The holder must lie flat.
Cleaning and care Cleaning the spray arms Removing the cutlery tray (if present) Particles of food can get stuck in the spray-arm jets and bearings. The spray arms should therefore be inspected regularly (approx. every 2–4 months). In order to be able to remove the upper spray arm, you first have to remove the cutlery tray (if present). Pull out the cutlery tray. Never run a wash program without using the spray arms. Damage due to soiling entering the circulation system.
Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upward to engage the inner ratchet. Then unscrew the spray arm by rotating the screw thread counterclockwise . Removing the middle spray arm Rotate the screw thread of the lower spray arm counterclockwise and pull the spray arm upward to remove . Cleaning the spray arms Rotate the screw thread of the middle spray arm clockwise and remove the spray arm .
Cleaning and care Reinstalling the spray arms Inserting the cutlery tray (if present) Reinstall the upper spray arm and tighten it by hand. Slide the cutlery tray back onto the rails from the front. Reinstall the middle spray arm. Replace the safety clips in the rails on both sides of the cutlery tray. Reinstall the lower spray arm and ensure that the filter combination lies flat in the base of the wash cabinet.
Cleaning and care Checking the filters in the wash cabinet Cleaning the filters The filter combination in the base of the wash cabinet retains coarse soil from the suds solution. This prevents soiling getting into the circulation system and re-entering the wash cabinet through the spray arms. Remove the lower spray arm (see “Cleaning the spray arms” under “Cleaning and care”). Damage due to soiling entering Turn off the dishwasher.
Cleaning and care In order to clean the inside of the filter, pull the microfilter on the plastic ring downwards and away from the filter combination. Rinse all of the filters under running water. If necessary, use a soft cleaning brush to remove soiling. Insert the microfilter back into the filter combination. Reinstall the filter combination so that it lies flat in the base of the wash cabinet. Rotate the screw thread clockwise until the arrow in the viewing window points to the lock symbol .
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a program, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove. Disconnect the dishwasher from the power supply. To do this, turn off at the electrical socket and withdraw the plug. Take the filter combination out of the wash cabinet (see “Cleaning the filters” under “Cleaning and care”).
Cleaning and care Damage due to incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters. It is especially difficult to see glass splinters in the drain pump. Take care when cleaning the drain pump. Carefully remove all foreign objects from the drain pump. Check the drain pump impeller by manually turning it.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. This section only lists faults that you can remedy yourself. All other faults are shown in Fault FXX. Technical faults Problem Possible cause and solution The dishwasher does not start.
Frequently Asked Questions Fault messages Problem Possible cause and solution The in-operation indica- Before remedying the fault: tor light is flashing Turn off the dishwasher. quickly. The alarm tone is sounding. One of the following faults appears in the display: Fault F: Technical fault. Switch the appliance off and back on again. Read the Operating Instructions for additional details. Waterproof fault. Turn the appliance off, close the water supply and contact Miele Service.
Frequently Asked Questions Door release Problem Possible cause and solution The in-operation indica- Before remedying the fault: tor light is flashing Turn off the dishwasher. quickly. The alarm tone is sounding. The following fault is indicated via the display: Door opening fault. Switch the appliance off and back on again. Read the Operating Instructions for additional details. The door does not open automatically. There may be a technical fault.
Frequently Asked Questions Water intake fault Problem Possible cause and solution The in-operation indicator light is flashing quickly. The alarm tone is sounding. One of the following messages appears in the display: Open the water supply The water supply is turned off. Open the water supply all the way. Insufficient water. Open Before remedying the fault: Turn off the dishwasher. the water supply all the way.
Frequently Asked Questions Water drainage fault Problem Possible cause and solution The in-operation indicator light is flashing quickly. The alarm tone is sounding. The following message appears on the display: Water was not pumped Before remedying the fault: Turn off the dishwasher. away, see Operating Instructions 102 Water-drainage fault. There might be water in the wash cabinet. Clean the filter combination (see “Cleaning the filters” under “Cleaning and care”).
Frequently Asked Questions Fault in the AutoDos (automatic dispensing) Problem Possible cause and solution The following message appears on the display: The AutoDos function is active but no PowerDisk has been inserted. Insert a PowerDisk (see “Automatic dispensing/ AutoDos” under “Detergent”). If you do not wish to use AutoDos, deactivate the function using OK. Insert PowerDisk or deactivate AutoDos with OK. The in-operation indicator light is flashing quickly. The alarm tone is sounding.
Frequently Asked Questions Problem Possible cause and solution The in-operation indicator light is flashing quickly. At the end of the program, the alarm tone sounds and the display shows the following message: Fault F 601: A fault has There is a fault in the AutoDos. Turn the dishwasher off and back on again. Check whether the PowerDisk holder and the PowerDisk have been installed correctly (see “Automatic dispensing/AutoDos” under “Detergent”).
Frequently Asked Questions Spray arm fault Problem Possible cause and solution During the program and at the end of the program, the display shows the following message: The lower spray arm is blocked or the nozzles of the lower spray arm are clogged. The AutoDos function is automatically deactivated during the program because the AutoDos detergent outlet cannot be completely flushed out. Turn the dishwasher off and back on again.
Frequently Asked Questions General dishwasher problems Problem Possible cause and solution The door will not open when knocked. The Knock2open function has been permanently disabled. Switch the door-opening function on again (see ”Knock2open” under “Settings”). If the door still will not open or if there is a power failure, the door can still be opened manually using the the door-opening aid supplied (see ”Door-opening aid” under ”Before using for the first time”).
Frequently Asked Questions Problem Possible cause and solution At the end of a program This is part of the normal function of the drying systhere is a film of moistem. The moisture will dissipate after a short time. ture on the inside of the door and possibly on the interior cabinet walls. Water remains in the Before remedying the fault: wash cabinet at the end Turn off the dishwasher. of a program. The filter combination in the wash cabinet is clogged.
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking noise in the wash cabinet. A spray arm is knocking against a wash item. Carefully open the door and rearrange the wash items that are obstructing the spray arm. There is a rattling noise in the wash cabinet. Wash items are not secure in the wash cabinet. Carefully open the door and rearrange the wash items so that they sit securely. There is a foreign object (e.g., glass shard) in the drain pump.
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishware is not clean. The dishware was not loaded correctly. See notes under “Loading the dishwasher”. The program was not powerful enough. Select a more powerful program (see “Program overview”). Activate the Extra clean function (see “Options – Extra clean”). Activate the “Second interim rinse” function (see “Settings – Second interim rinse”). Not enough detergent was dispensed.
Frequently Asked Questions Problem Possible cause and solution The dishware is not dry or utensils and glasses are flecked. The rinse-aid dosage is set too low or the rinse-aid reservoir is empty. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see “Rinse aid” under “Before using for the first time”). The dishware was taken out of the wash cabinet too soon. Leave the dishware in longer (see “Unloading the dishwasher” under “Operation”).
Frequently Asked Questions Problem Possible cause and solution Plastic parts are discol- Natural dyes, e.g., from carrots, tomatoes, or ored. ketchup may be the cause. The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes. Use more detergent (see “Detergent”). Parts that are already discolored will not revert to their original color. White residue is visible on the dishware. Clouding has occurred on glassware and utensils. The film can be wiped off.
Frequently Asked Questions Problem Possible cause and solution There are rust stains on The affected items are not corrosion resistant. the utensils. No remedy. Purchase utensils which are dishwasher-safe. A program was not run after reactivation salt was added. Traces of salt have got into the normal wash cycle. Always run the QuickIntenseWash 65°C program with the Express program option selected and without any wash items after adding reactivation salt.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Appliance warranty and product registration You can register your product and/or view the manufacturer´s warranty terms and conditions for Miele appliances and vacuum cleaners at www.mieleusa.com.
Optional accessories Dishwasher detergent, rinse aid, and cleaning and care products are available for this dishwasher, as are optional accessories. All the products have been designed for Miele appliances. In hard water areas, we recommend using the complete Miele system: The PowerDisk, rinse aid, and salt perfectly match each other. These and many other useful products can be ordered directly from Miele’s online store, Miele Customer Service, or from your Miele dealer.
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher.
*INSTALLATION* Installation Water intake Danger to health due to wash water. Water in the dishwasher must not be used as drinking water. Do not drink any water from the dishwasher. Health risk and risk of damage due to contaminated incoming water. The quality of the incoming water must correspond to the drinking water specification of the country in which the dishwasher is being operated. Connect the dishwasher to a drinking water supply.
*INSTALLATION* Installation A water supply with 3/8" Compression Connection (thread connection of 9/16" – 24 UNEF) must be provided on site. If this type of faucet is not available, only a qualified installer may connect the dishwasher to the domestic water supply. A back-flow preventer is not required by the manufacture, but may be required by local code regulations. The water-connection pressure needs to be between 7.25 and 145 psi (50 and 1,000 kPa).
*INSTALLATION* Installation Water drainage The appliance drainage system has a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. The dishwasher is supplied with approx. 5 ft (1.5 m) of flexible drain hose with an internal diameter of 7/8" (22 mm). The hose can be extended using a connection piece to attach a further length of hose. The drainage length must not be longer than 13 ft (4 m) and the delivery head no higher than 3 ft (1 m).
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a program can cause the appliance to empty itself of water. Open the dishwasher door fully. Remove the lower basket. Insert a screwdriver into the middle opening of the vent valve in the left wash cabinet wall .
*INSTALLATION* Installation Electrical connection Installation, repairs and other work by unqualified persons could be dangerous. Check that the voltage, frequency and fuse rating shown on the data plate match the household power supply. The power outlet must be accessible after installation. Do not use an extension cord to connect the dishwasher to the electrical supply. Danger of overheating! See data plate on the right side of the door.
*INSTALLATION* Installation Hardwired electrical connection It is possible to hardwire this appliance to an existing power cable. CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually “tripping” the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Sound emission testing Prerequisites for sound emission tests Load the dishwasher with 16 standard place settings and use the Normal program. Setup for sound emission tests The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. Secure the front panel. Push the provided fleece strips (depending on model) under the toe kick until it is flush with the appliance feet .
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Stick the insulating strip onto the front top edge of the toe-kick board .
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Customer Service & Support Phone: 888-99-MIELE(64353) info@mieleusa.com www.mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
G 7961, G 7966 en-US M.-Nr.