User Guide

Table Of Contents
Options
47
Factory default settings
If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:
Turn the dishwasher off with the
button, if it is turned on.
Press the Start button and, simulta-
neously, switch the dishwasher on
using the button.
Keep the Start button pressed for at
least four seconds until the Start indi-
cator light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the button 19 times.
The indicator light will flash once at a
long interval and then 9 times at short
intervals.
The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.
 : All settings are set to factory de-
fault settings
 : At least one setting has been
changed
To reset the dishwasher to the factory
default settings, press the Start but-
ton.
The setting is now stored in memory.
Turn the dishwasher off with the
button.