Operating instructions

~
A damaged appliance can
endanger your safety. Immediately turn
off the machine at the power switch and
contact the Miele Service Department.
~
Machine operators must be trained
on a regular basis. Untrained personnel
must not be allowed access to the
machine or its controls.
~
Always exercise caution when
handling chemicals for this machine
(cleaner, neutralizer, rinsing agent,
etc.). Some of these products contain
corrosive and irritating substances.
NEVER use organic solvents or
flammable liquids due to the risk of
explosion.
Always follow proper safety technique.
Use protective glasses and gloves.
Always follow the manufacturer's safety
recommendations when using process
chemicals (see material safety data
sheets).
~
Avoid inhaling powdered products.
Swallowing process chemicals can
result in chemical burns to the mouth
and throat and suffocation.
~
The water in the wash cabinet is
NOT safe to drink.
~
Do not stand, sit or lean on the open
door. The appliance might tip over or
be damaged.
~
Take care when sorting standing
items with sharp pointed ends. Position
them in the machine so that you will not
hurt yourself or create a danger for
others.
~
When operating this machine,
beware of the high temperatures
involved. If you bypass the electrical
lock to open the door, there is the
danger of scalding and heat or
chemical burns. If disinfectants have
been used, there is also the danger of
inhaling toxic vapour.
~
If you are exposed to toxic vapours
or processing chemicals, consult the
manufacturer's material safety data
sheets for emergency procedures.
~
Always allow baskets, inserts and
the washload to cool down. Empty any
water from hollow items into the wash
cabinet.
~
Do not touch the heating elements
when you open the door at the end of a
program. They remain hot for quite a
few minutes after the program has
ended and can cause burns.
~
NEVER hose down the machine or
the immediate vicinity, e.g., with a water
hose or pressure washer.
~
Before servicing the machine,
disconnect it from the power supply by
either removing the fuse, unplugging
the unit or manually tripping the circuit
breaker.
Safety instructions and warnings
6