Specification Sheet

ManualsBrandsMiele ManualsWarming & Storage DrawersMiele ESW 4802 FB

Product and Cut-out Dimensions Page 1 of 4

Warming Drawer

ESW

4802 FB Custom Panel and Handle

ESW

4802

Custom

Panel

and

Handle

Location Codes

E – The drawer comes equipped with a 5 ft. (1.5 m) power

cord with a three-prong grounding plug ready for connection

to a 120V, 15 A, 60 Hz power supply.

O – 1” ² minimum hole size for plug. Outlet to be

installed in adjacent cabinetry

endant u

Note: Drawing is not to scale

Specification Sheets OJS 11142011

Notes

Panel must consist of heat resistant material 140 ° F (60° C).

Miele appliances can be installed flush or proud. Discuss

your installation requirements with your architect, designer

and installer.

All installations must be done in accordance with local codes.

panel thickness

Summary of content (4 pages)

PAGE 1
Product and Cut-out Dimensions Warming Drawer ESW 4802 FB Custom Panel and Handle O Page 1 of 4 E Location Codes E – The drawer comes equipped with a 5 ft. (1.5 m) power cord with a three-prong grounding plug ready for connection to a 120V, 15 A, 60 Hz power supply. O – 1” ² minimum hole size for plug. Outlet to be installed in adjacent cabinetry Notes Panel must consist of heat resistant material 140 ° F (60° C). Miele appliances can be installed flush or proud.
PAGE 2
Product and Cut-out Dimensions Warming Drawer ESW 4802 FB Custom Panel and Handle Page 2 of 4 This unit is designed to accept a custom door panel supplied by the cabinet maker. Panel size as follows: Width: 29 13/16” (757 mm) Height: 10 5/8” (270 mm) Thickness: Minimum of 3/8” (10 mm) Maximum panel weight: 11 Pounds (5 kg) Location Codes E – The drawer comes equipped with a 5 ft. (1.5 m) power cord with a three-prong grounding plug ready for connection to a 120V, 15 A, 60 Hz power supply.
PAGE 3
Product and Cut-out Dimensions Warming Drawer ESW 4802 FB Custom Panel and Handle Page 3 of 4 Installation shown with a Miele 30” Oven O E Location Codes E – The drawer comes equipped with a 5 ft. (1.5 m) power cord with a three-prong grounding plug ready for connection to a 120V, 15 A, 60 Hz power supply. O – 1” ² minimum hole size for plug. Outlet to be installed in adjacent cabinetry Notes Panel must consist of heat resistant material 140 ° F (60° C).
PAGE 4
Product and Cut-out Dimensions Warming Drawer ESW 4802 FB Custom Panel and Handle Page 4 of 4 Side view with a Miele oven This unit is designed to accept a custom door panel supplied by the cabinet maker. Panel size as follows: Width: 29 13/16” (757 mm) Height: 10 5/8” (270 mm) Thickness: Minimum of 3/8” (10 mm) Maximum panel weight: 11 Pounds (5 kg) Location Codes E – The drawer comes equipped with a 5 ft. (1.