36” Downdraft Hood Proud Mounting DA 6891 Shown: KM 6375 with DA 6891 Flush Mounted Please note: This information is subject to change 8mieleusa.
36” Downdraft Hood Proud Installation SPECIFICATIONS Overall Unit Dimensions Overall Canopy Height 36” (915 mm) W x 2511/16” (652 mm) H (Unextended) x 43/4” (120 mm) D 16” (406 mm) Built-In Minimum Opening Dimensions 3115/16” (812 mm) W x 2513/16” (656 mm) H (Including Countertop) x 41/4” (108 mm) D Fan Fan Speeds Maximum CFM 4 DA 6891 w/DAG 600 g 500 CFM DA 6891 w/DAG 1000 g 1000 CFM Duct Duct Diameter DAG 600 g 6” (150 mm) DAG 1000 g 10” (254 mm) Electrical Electrical Requirements Power Cable 120
6” Downdraft Hood Proud Installation STANDARD ACCESSORIES Single Support Bracket for One Cutout Installation Two Support Brackets for One or Two Cutout(s) Installation OPTIONAL ACCESSORIES DAG 600 DUU 2900 DUU 150 500 CFM Internal Blower Recirculation kit for use with DAG 600 Recirculation kit for use with DAG 600 DAG 1000 DKF18-900 DUU 151 1000 CFM External Blower Replacement OdorFree charcoal filter (Used with DUU 2900) Recirculation kit for use with DAG 600 R2000 DKF22-900 Reducing col
36” Downdraft Hood Proud Installation PRODUCT SPECIFICATIONS Page 4 of 14
36” Downdraft Hood Proud Installation OPTION 1 ONE CUTOUT INSTALLATION SPECIFICATIONS Cutout Dimensions for One (1) Cutout - Proud Mount Installation Page 5 of 14
36” Downdraft Hood Proud Installation OPTION 1 INSTALLATION SPECIFICATIONS One Cutout Options with Support Bracket(s) (Included) Single Support Bracket A support bracket is mounted on the downdraft extractor. It serves as a support for the cooktop when the downdraft extractor and the cooktop are installed in a common cutout j. Two Angle Support Brackets The following situation, the support bracket should be replaced with two small angle brackets.
36” Downdraft Hood Proud Installation OPTION 2 TWO CUTOUT INSTALLATION SPECIFICATIONS Cutout Dimensions for Two (2) Cutout - Proud Mount Installation - Allows for Installation with Proud Mounted Downdraft in Combination with Flush or Proud Mounted Combisets and Cooktops Page 7 of 14
36” Downdraft Hood Proud Installation OPTION 2 INSTALLATION SPECIFICATIONS Two (2) Cutout Option with Support Brackets (Included) Two Angle Support Brackets Two small angle brackets are mounted on the downdraft extractor. They serve as a support for the downdraft extractor when the downdraft extractor and cooktop are installed in two separate cutouts.
36” Downdraft Hood Proud Installation EXTERNAL BLOWER DAG 1000 (Optional Accessory) Page 9 of 14
36” Downdraft Hood Proud Installation EXTERNAL BLOWER DAG 1000 - CONTINUED (Optional Accessory) Page 10 of 14
36” Downdraft Hood Proud Installation Recirculation Kit DUU 2900 (Optional Accessory) Ventilation Cutout Page 11 of 14
36” Downdraft Hood Flush Installation Recirculation Kit DUU 150 (Optional Accessory) Page 12 of 14
36” Downdraft Hood Flush Installation Recirculation Kit DUU 151 (Optional Accessory) Page 13 of 14
36” Downdraft Hood Proud Installation Reducing Collar (Optional Accessory) If you would like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 300 CFM in use with DAG 600. Check local building codes for maximum CFM requirements.