Manual & Installation Guide

Operation (Automatic mode)
19
Cooking process
 If, for example, you switch on a
burner at the highest power setting to
heat cookware in preparation for
searing and then reduce the power
level after approx. 60 to 90 seconds,
a cooking process is recognized.
The hood turns on automatically and,
after the cooktop power level has been
reduced, switches back to fan level 3,
where it remains for approx. 5 minutes.
After this, the fan level is once again
determined by the Con@ctivity function.
 You can also manually select a
different fan level before then.
Deactivation
 Turn off all burners.
Over the next few minutes, the
ventilation hood fan setting will
decrease one level at a time until the
hood eventually turns off.
This helps to neutralize any lingering
vapors and odors in the air.
– From the intensive setting, the fan
immediately switches to level 3.
– If the fan is operating at level 3, it will
switch to level 2 after approx. 1
minute.
– From level 2, the fan switches to level
1 after 2 minutes.
– After 2 minutes at level 1, the fan
automatically turns off.
– After another 30 seconds, the
overhead cooktop lighting turns off.
The cooking process is now finished.