Owner's Manual

Cleaning and care
28
 T
o remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the grease filters by hand
 Cle
an the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
t
o the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degr
easer sprays
– Oven sprays
Cleaning the grease filters in the
dishwasher
 Place
the filters as upright or inclined
as possible in the lower basket.
Ensure that the spray arm is not
obstructed.
 Use a common household
dishwasher det
ergent.
 Selec
t a program with a wash
temperature between 122°F (50°C)
and 149°F (65°C). In a Miele
dishwasher use the "Normal"
program.
Depending on the detergent used,
clean
ing the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the filters
in any way.
After cleaning
 Aft
er cleaning, leave the filters on an
absorbent surface to dry.
 When r
emoving the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.