Product Dimensions

ManualsBrandsMiele ManualsAppliances30 Inch Downdraft Ducted Downdraft

Product Dimensions Page 1 of 7

DA 6480 30

”

Downdraft Ventilation Hood

6480

Downdraft

Ventilation

Hood

DA 6490 36” Downdraft Ventilation Hood

Location Codes

1 DAG 500 Internal blower – The blower box can be mounted in such a way that the

vent collar is aligned to the left, the right, downwards or towards the rear, as desired.

2 Connection plate when using the DAG 1000 external blower. The blower or the

connection plate can also be mounted in the same position on the rear of the

Appliance.

X = Distance to the rear of the cabinet or wall. Must be a minimum of ½” (13 mm).

Exhaust duct connection diameters

DA 6480, DA 6490 with internal blower DA 6480, DA 6490 with external blower

DAG 500 Internal Blower - 6” Ø (150 mm) DAG 1000 External Blower- 10” Ø (254 mm)

Item 28648050USA – DA 6480 Shipping weight 44 lbs (20 kg)

Shipping dimensions 31 5/16” (795 mm) L x 8 1/4” (210 mm) W x 33 1/16” (840 mm) H

Item 28649050USA – DA 6490 Shipping weight 50.7 lbs (23 kg)

Shipping dimensions 37“ (940 mm) L x 8 1/4” (210 mm) W x 33 1/16” (840 mm) H

The hood requires a 120 VAC, 60 Hz, 15 A hard wire connection to the terminal.

All electrical work should be performed by a qualified electrician.

All installations must be done in accordance with local codes.

Drawing is not to scale Specification Sheets OJS 05152012

Summary of content (7 pages)

PAGE 1
Product Dimensions Page 1 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood Location Codes 1 DAG 500 Internal blower – The blower box can be mounted in such a way that the vent collar is aligned to the left, the right, downwards or towards the rear, as desired. 2 Connection plate when using the DAG 1000 external blower. The blower or the connection plate can also be mounted in the same position on the rear of the Appliance.
PAGE 2
Cut-out Dimensions Page 2 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood Location Codes A – Cooktop Overhang B – Cooktop Minimum Width DA6480: 28” (711 mm) DA6490: 34” (864 mm) C – Vented rear D – Feed the power cord and control cable when using an external blower downwards or to the rear.
PAGE 3
Product and Cut-out Dimensions Page 3 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood Exhaust air ducting using the DAG 500 internal blower, installed on the front of the appliance [vent duct 6” ø (150 mm)] A to the left or right B downwards C to the rear If the blower is being installed at the rear of the appliance, a cut-out must be made in the rear of the cabinet or wall where it can be mounted and appropriate clearances must be maintained behind the cabinet.
PAGE 4
Product and Cut-out Dimensions Page 4 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood DAG 500 Internal Blower Shown with interior mounted DAG 500 vent motor DAG 500 mounted in front of the exhaust system. DAG 500 Internal Blower exhaust diameter- 6” Ø (150 mm) DAG 500 mounted behind the exhaust system.
PAGE 5
Product and Cut-out Dimensions Page 5 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood DAG 1000 External Blower Installation using the DAG 1000 external blower connection plate Exhaust air ducting to the front. front Exhaust air ducting to the rear rear. Note that the back must be accessible for installation of the venting ductwork If using the external blower, install a connection cable between the ventilation system and the external blower.
PAGE 6
Product Dimensions Page 6 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood DAG 1000 External Blower ¾ Conduit Size 10” ø DAG 1000 External Blower exhaust diameter- 10” Ø (254 mm) Item 28996291USA – DAG 1000 Shipping weight 55 lbs (25 kg) Shipping dimensions 36 1/4“ (920 mm) L x 13 1/4” (336 mm) W x 30” (762 mm) H All installations must be done in accordance with local codes.
PAGE 7
Product and Cut-out Dimensions Page 7 of 7 DA 6480 30 30” Downdraft Ventilation Hood DA 6490 36” Downdraft Ventilation Hood Downdraft Recirculation Kit DUU 2900 2 1 3 Details Item 09162160 Cabinet cut-out 15 7/16” x 8 13/16” (392 mm x 224 mm) To be vented out the sides or base of cabinet. 5 7/8” Vent port can be mounted in 3 positions Discharge Grill exhaust is 180° Two - Item number 09162160 - DKF 18-1 Charcoal filters included All installations must be done in accordance with local codes.